Boneyard Praise

below are some unsolicited emails from people showing appreciation for the boneyard

From: kmarcone
Sent: Wednesday, November 5, 2014 3:05 PM
To: brenda at bikeboneyard.com
Subject: Re: PayPal money request from bikeboneyard for suzuki tc90 parts

Brenda
Kim here, Herb's wife. in case he did not tell you, we received the Suzuki parts and all is well. thanks again. Kim and Herb Lebo

From: Bill and Cindy Richter
Sent: Saturday, September 27, 2014 4:09 PM
To: brendaf@bikeboneyard.com
Subject: 1974 Honda MR50 Exhaust

I don’t need the whole exhaust, just the heat shield. Would you be willing to sell the heat shield for 25.00?

A friend told me about your bike boneyard and it looks awesome! We have 10 old Hondas ranging from 50cc to 480cc, 1969-1982.

Please let me know,

Bill Richter


From: Bill Crawford
Sent: Friday, September 26, 2014 6:44 AM
To: brenda from bikeboneyard
Subject: Re: Shipment Notice: A package has been shipped to you

Brenda,

Received the parts yesterday. 1. Thanks for the quick shipment. 2. In buying used parts you never know what you're going to get, but these pieces are in very good condition.
Thanks, again.

Bill Crawford


From: barrows
Sent: Wednesday, September 24, 2014 9:07 AM
To: brendaf@bikeboneyard.com

Subject: 67 Yamaha Y1-2t

Hi Brenda,

I recently did business with you and purchased a CZ 250 motor. I am pleased with it.

From: Tom Pappas
Sent: Wednesday, September 03, 2014 7:35 AM
To: brenda from bikeboneyard
Subject: Re: 1974 Honda xr 75


Gosh that is amazing.....I have looked at a few recently, including a 1970(?) Honda sl70 that looked showroom new! I'm blown away at your skills on the restoration of these bikes. I admire and salute you for having found a way to make a living doing something you obviously love to do! Keep it up.


From: Tom Pappas
Sent: Tuesday, September 02, 2014 5:49 PM
To: brendaf@bikeboneyard.com
Subject: 1974 Honda xr 75

Hi Brenda,

I emailed you about a year ago and asked you to be on the look out for a nice 1974 Honda xr 75 for me. I konw you probably don't remember, and you may not even work that way where you let individuals know when you get a particular bike in. But I just wanted to try again. I've been searching the internet (eBay and Craigslist) for one, but none of the ones I find look as good as the bikes I see on your site. And I want to ask, do you guys do your own restorations? Some of the bikes you have are just incredible looking. I was just curious if you get them that way or if you restore them. Your website is so awesome and easy to maneuver around on....and your place looks so cool. Wish I didn't live so far away, as I would love to come visit and meet ya'll. Anyway, please keep a look out for me a good 1974, 1975 or 1976 Honda xr75! Thanks! Tom Pappas




From: Dennis B
Sent: Saturday, August 30, 2014 2:41 AM
To: brendaf@bikeboneyard.com
Subject: Re:

Hey Brenda,
I installed the new solenoid you sent and the starter cranks like crazy. The bike still isn't starting so there is obviously something else going on, but at least now the starter works. Thank you very much for your consideration. I'm sure we will do business again.
Bix


-----Original Message-----
From: Phil Kates
Sent: Friday, August 29, 2014 7:57 AM
To: brenda from bikeboneyard
Subject: Re: 93 CR 500

Received parts yesterday looked at them real quick. Everything looked good. Thank you very much.


From: Matthew Altieri
Sent: Thursday, August 28, 2014 3:58 PM
To: brendaf@bikeboneyard.com
Subject: 75 DT125 Parts

Hello again,

I just wanted to say thank you for the super fast shipping on the stator I bought from you this week. I was extremely
surprised to see it in my mailbox this afternoon.


I’m interested in the following 75 DT125 parts:

Seat. What is the condition of the seat pan? I’m not worried about the foam & seat cover,
but a decent seat pan is hard to find.

Turn Signals. However, I only need the rear ones. Would that be a problem or are you looking to sell them as a set?

Speedometer and Tach. You mentioned that the gauge faces were in good condition, what about the housings? Is there any rust, pits or dents? Also, what is the mileage on the speedo?

Handlebars. Are they badly (or at all) rusted or bent?

Unfortunately, I’ll have to wait until next week to make any orders.

Again, thank you so much!

Sincerely,

Matt Altieri


From: Hal Johnson
Sent: Monday, August 18, 2014 8:08 AM
To: brenda at bikeboneyard.com
Subject: Re:

Hello Brenda:

I'm in need of a few more parts:

Exhaust baffle: '76 Yamaha DT400
Rear "buddy" seat: '76 Yamaha DT400
Handlebars: '71-72' Yamaha XS650
RH switch: '76 Honda cb550k

Let me know if you've got any of these. BTW, I received the front forks for the XS650; they look great. Thx very much!
Hal--Omaha

From: jusjym
Sent: Tuesday, August 12, 2014 7:18 PM
To: brenda at bikeboneyard.com
Subject: 80 yam it 125 rear wheel and 78 yam dt 175 thrott cable

Brenda, I received items and all is good. Sorry it has taken a while to reply. I am still working on the spokes to free up so they can be tightened. Including the sprocket was an unexpected gift. Thanx for a great deal. I have bought before and surely will again. JYM


From: Neal Ogasawara
Sent: Tuesday, August 12, 2014 6:03 PM
To: brenda from bikeboneyard
Subject: RE: yamaha rd350

Brenda thanks for sending the part down its exactly what I needed. You by chance have an ignition switch for the same bike with key?


-----Original Message-----
From: Tom Fennessy
Sent: Friday, August 01, 2014 8:51 PM
To: brendaf@bikeboneyard.com
Subject: Thanks

Hi Brenda thanks for getting the parts out l just got them, haha that's cool that your a Fennessy also I don't think there's any relation unless there a family discount. I will definetly get in touch with you guys soon as this project keeps rolling along.


From: d v
Sent: Thursday, July 17, 2014 4:27 PM
To: brenda from bikeboneyard
Subject: RE: rm rim

nevermind, i just plucked it off my front porch now and its perfect, you are the best!...thanks again for everything


From: Kevin Kuchenbrod
Sent: Tuesday, July 08, 2014 3:13 PM
To: brenda from bikeboneyard
Subject: RE: Need a motor

Thanks so much for your help. The carbs work great. But now I'm in need of a fuse box. Would you happen to have a fuse box for a 1979 Suzuki gs850?


From: Kevin Marshall
Sent: Saturday, July 05, 2014 7:26 AM
To: brenda from bikeboneyard
Subject: RE: Yamaha it175

The side stand and side numberplate arrived today. Thank you. What kind of a deal can you make on a headlight/numberplate for the same 1983 it175 ?


From: Don Planalp
Sent: Thursday, June 26, 2014 4:03 PM
To: brenda from bikeboneyard
Subject: 73 CB750 Parts

Brenda:

Greetings (again) from Missouri. And thanks for your help a couple years ago with parts for my '78 XT500. I eventually got it on the road, enjoyed it for a year or so, then sold it for $2000.
Last week someone in Minnesota gave me a '73 Honda 750 Four. I see that you have one there. I'd be interested in photos of the (1) Seat (2) Fender (3) 4-into-2 pipes.
Thanks.


From: Joseph Mathis
Sent: Wednesday, June 25, 2014 10:18 PM
To: brenda from bikeboneyard
Subject: Re: looking for Benelli parts

The parts for the Benelli have arrived. I can use everything. I'm glad I found you folks for this project. You have my highest rating. 5 stars for a great job. I look forward to tackling this project. It's a neat little bike, and a collectors item.
Thanks again for a great transaction



From: Pedro Rodrigues
Sent: Tuesday, May 20, 2014 3:11 AM
To: brenda from bikeboneyard
Subject: Re: Kawasaki f11-b

Hello Brenda,
the package has arrived yesterday.
Despite the expensive postage and customs fees that i had to pay, the forks are in very good shape!!! Thanks!!! That is exactly what i wanted for my bike.
Thanks once again for the horn, its very nice and is working fine!!!
As i mentioned before i will need the fuel tank with cap and petcock, if you will get it in the near future or if you know who has it please remember me! It was a pleasure to do business with you.
Best wishes for you.
Pedro Rodrigues


-----Original Message-----
From: Bob Rooney
Sent: Thursday, May 15, 2014 8:01 AM
To: brendaf@bikeboneyard.com
Subject: Parts

Hi Brenda
I got the parts today and that's what I wanted. Looking forward to do more business with you in the future. Thank you Bob Rooney


From: Ryan Gifford
Sent: Tuesday, May 13, 2014 12:59 PM
To: brenda from bikeboneyard
Subject: RE: suzuki t500

Got the first motor, looks good. Thanks. Waiting on the second.
Let me know if any more later motors become available.
Or if you get any H2 Kawasaki 750 triples in.
Appreciate your service.


From: Robert.Rivard
Sent: Monday, May 12, 2014 1:29 PM
To: brendaf@montana.com
Subject: RE: 78 honda cr-250 carb;

Hello got the Carb Looks good
Thanks Later Robert


From: wallyp
Sent: Wednesday, May 07, 2014 10:55 AM
To: brendaf@bikeboneyard.com
Subject: 1973 Hodaka Dirt Squirt parts

I bought the carb from the 1973 dirt squirt from you. It was nice. Can you send me pictures of the tank and fenders? Walter Pavelitz. Thank You.


From: kawif8 man
Sent: Monday, April 28, 2014 2:43 PM
To: brendaf@bikeboneyard.com
Subject: c.d.i

got the c.d.i,works great,thanks


From: Ray Green
Sent: Friday, April 25, 2014 4:08 PM
To: brenda from bikeboneyard
Subject: RE: suzuki ts tail light assem

Brenda,

Got the tail light. Thanks for the fast service. May be getting an AS50 Suzuki that needs exhaust. May be able to rebuild the TS90 pipe in the background pic.
Thanks,

Ray Green


From: Berry Pribadi
Sent: Thursday, April 24, 2014 2:00 AM
To: brenda at bikeboneyard.com
Subject: Re: PayPal money request from bikeboneyard for 78 yamaha dt-125 head

breanda
Amazing, very fast shipping thanks


-----Original Message-----
From: Brian Stewart
Sent: Saturday, April 19, 2014 7:20 PM
To: brenda from bikeboneyard
Subject: Re: Bighorn parts

Thanks Brenda. I appreciate the great service. Brian.


From: Kennedy, Thomas
Sent: Thursday, April 17, 2014 9:00 AM
To: brenda from bikeboneyard
Subject: RE: 1971 F7 175 fuel tank

Hey Brenda. Just wanted to let you know that I got the tank and it arrived in good shape. Thanks for all the help and I will definitely be contacting you for more bike parts when I need them. Thanks,
Tom


From: Ray Green
Sent: Tuesday, April 15, 2014 8:50 AM
To: brendaf@bikeboneyard.com
Subject: Benelli

Hello Brenda,

I wanted to let you know I got the Benelli Firebolt home yesterday. It looks great and I am very happy with it. Thanks for the GREAT service and your help. Also, am looking for a taillight assembly for a 1972 TS/TC 90 Suzuki.
Thanks again,

Ray Green


From: Kimberly Moon
Sent: Saturday, April 12, 2014 1:34 PM
To: brendanf@montana.com
Subject: parts for 85 honda magna

I had previously ordered parts from you and was very pleased. I wanted to see if you had the lever b seat lock (7714-mb1-870), cotter pin 1.6x10 (94201-16100), and the spring seat lock(77151-mb1-870). The website identifying these parts is www.chaparral-racing.com. I would appreciate any help in obtaining these parts.
Thank you very much,


-----Original Message-----
From: Jon
Sent: Wednesday, April 09, 2014 5:51 PM
To: brenda from bikeboneyard
Subject: Re: Order status.

Your a rockstar!! Thanks Brenda.


From: glenntrenholm
Sent: Monday, April 07, 2014 6:44 PM
To: brendaf@bikeboneyard.com
Subject: yz-50 parts

Hi, this is Glenn from Gloucester. I was looking thru the site: YZ-50, Ign. cover , pipe and silencer. Seeing if you have these parts left. Also need a cylinder, intake, carb, and ex. manifold . I see Jo-Jo Keller on the wall !!! I have that same photo i got from Paul Buckley ! Take care , Glenn
PS, The TY-80 looks great ! Nice job packing everything and sending .


From: Gaard Jay H
Sent: Tuesday, April 01, 2014 6:09 AM
To: brendaf@bikeboneyard.com
Subject: KAWASAKI KT250 HORN

Good morning.received the horn and bracket yesterday and it looked GREAT!!!!!!!!!!! THANK YOU, JAY


From: Mike Archbold
Sent: Monday, March 31, 2014 3:53 PM
To: brenda at bikeboneyard.com
Subject: Re: yamaha dt-360 rack

Brenda,

Got the Yamaha DT360A utility rack today. Just what I was looking for.

Thanks,
Mike


From: David Zhen
Sent: Friday, March 28, 2014 11:02 AM
To: brenda bikeboneyard
Subject: More ex250f parts needed.

Hi Brenda,

I received the instrument panel, that was great. I'm now looking for more parts, maybe you can help.
I'm looking for an undamaged/unbent headlight bracket with headlight for an 88-07 ninja ex250f. I took a closer look at mine and I think mine is bent, because I am having trouble putting the instrument panel on. Left and Right Front Turn signals with mounting pieces. Passenger left foot rest. (the side with gear lever) If you have these can you send me pictures and price. Also I was curious to know if you had bolts/nuts/dampers for this model too.

Thank you,
David Zhen


From: Nathaniel Clemons
Sent: Monday, March 17, 2014 10:25 AM
To: brenda from bikeboneyard
Subject: RE: Rekluse for 2006 Honda crf450x

Ok that is awesome! I was just bragging to my buddies that had already bought Rekluse. I told them to send them back and order through you haha


From: Nathaniel Clemons
Sent: Thursday, March 13, 2014 11:32 PM
To: brenda at bikeboneyard.com
Subject: Re: Rekluse for 2006 Honda crf450x

By the way I will be scanning your amazing website for hours dreaming up all kinds of projects and telling everyone I know! Amazing!!


From: jgrant667
Sent: Wednesday, March 05, 2014 12:57 PM
To: brendaf@bikeboneyard.com
Subject: carburator

Hi Brenda I received items a few days ago fine thank you. I need a carb rebuild kit or a float bowl gasket for 74 tm 125.Let me know please much boneyard greetings thanks bye now.


From: Marc Biro
Sent: Friday, February 14, 2014 5:41 PM
To: brenda at bikeboneyard.com
Subject: Re: 79 honda xr250 tank

just got it. looks nice.
Thanks
Marc


From: jgrant667
Sent: Friday, February 14, 2014 4:51 PM
To: brendaf@bikeboneyard.com
Subject: part

Hello I received my part today. The box was well secured and the part is in very good condition. A paint job will really finish it off not that it needs one much boneyard praise thanks.


From: Lynea
Sent: Tuesday, February 11, 2014 8:43 PM
To: brenda from bikeboneyard
Subject: Re: bikes

thank u so much that would be great you’re the best brenda thanks joe


From: Roberta Frederick
Sent: Sunday, February 02, 2014 10:25 PM
To: brenda from bikeboneyard
Subject: Need parts/price, etc. Second Request

Re: 1982 Honda GL 1100

Hi,

Thank you for your prompt shipment of my last order. Need to see if you still have available air shocks and forks. Seals are leaking on both on my bike and I need to replace those two items.
Thanks,
Terry Frederick


-----Original Message-----
From: David Richardson
Sent: Tuesday, January 28, 2014 11:22 AM
To: brendaf@bikeboneyard.com
Subject: Thunder Dog Forks

Brenda

I received the Thunder Dog forks and triples.
They look to be in great shape.


Please let me know if you get any new Hodaka parts or bikes in.
I am also interested in 1979 -1980 Husqvarna bikes and parts
Thanks again

David Richardson


From: kcall957
Sent: Sunday, January 26, 2014 5:54 PM
To: brenda from bikeboneyard.com
Subject: Re: 2001 Bmw k1200 lt

Brenda
Recently got a ABS control unit for a B M W 1200 ,Part worked great. Just wanted to thank you for the super service & fare prices you offered me .I will definitely recommend your company to anyone else I hear about needing bike parts Thank You Steve


From: Reygil Trinidad
Sent: Wednesday, January 22, 2014 7:59 AM
To: brenda from bikeboneyard
Subject: Re: PAID

I received the shipment. Thank you. Everything looks great and shipping was very fast considering what you had to pack. One more question. Any idea if the motor ran in the last few years? Thanks again!!
-Reygil


From: gregg bonelli
Sent: Tuesday, January 21, 2014 5:34 PM
To: brenda from bikeboneyard
Subject: Re: Kaw 90 frame and swing arm $75

Thank you, Brenda. It's nice to do business with good people. Gregg


From: Blake Steffy
Sent: Thursday, January 16, 2014 9:57 AM
To: brenda from bikeboneyard
Subject: Re: 86 KTM 250 PARTS

Payment sent! Thanks so much for working with me on the consolidated shipping costs, not mention prompt, excellent customer service!! Do you have any idea when you would expect the items to ship? Also, I assume you can provide me with tracking information once you have it?? Thanks again, Brenda! I'm sure we'll be doing more business together in the future!!
PS - IF you don't mind me asking; where the heck do all these bikes come from?!?!? lol

All the best,

Blake Steffy


From: mark belden
Sent: Saturday, January 11, 2014 11:41 AM
To: brenda at bikeboneyard.com
Subject: Re: 88/89 kawasaki kx-250 kickstarter
FIRST OF ALL THANK YOU SO MUCH FOR THE GREAT SERVICE ON MY KICK STARTER ORDER IT IS PERFECT. I AM ALSO WONDERING IF YOU WOULD HAVE THE COUNTER SHAFT COLLAR THAT GOES IN BEHIND THE FRONT DRIVE SPROCKET THE OEM PART NUMBER IS 92027-1963 IF THAT WILL HELP. PLEASE LET ME KNOW AND WE WILL DO IT THE SAME WAY AS THE LAST ORDER THANKS AGAIN FOR YOUR GREAT HELP MARK


-----Original Message-----
From: Pete Holderbein
Sent: Monday, December 16, 2013 12:40 PM
To: brendaf@bikeboneyard.com
Subject: 1979 YZ 250

Brenda-I received the wheels I ordered from you for my 1979 YZ250 project bike and I'm very happy with them. Now I just discovered that the crank on the same bike is bad and needs to be replaced. Do you have a crank for this bike that fits tight in the main bearings and doesn't need any additional work, specifically the big end bearing? Thanks for any help.

Pete Holderbein


From: Jason Frazier
Sent: Saturday, December 14, 2013 5:24 PM
To: brendaf@bikeboneyard.com
Subject: 03 KTM pro jr silencer

Hello, I recently purchased a clutch cover from you on a JF1100 it worked out great! Thank you!

I am now looking for a 03 KTM pro Jr. 50 silencer- if you have a pipe that would be great too- if not, the silencer is all I need-

Thanks,
Jason


From: Don Razniewski
Sent: Saturday, December 14, 2013 9:58 AM
To: brenda from bikeboneyard
Subject: Re: 1981 Honda CM400 C front wheel

amazing! thank you


-----Original Message-----
From: redneckraider2005
Sent: Friday, December 13, 2013 8:45 AM
To: brenda from bikeboneyard
Subject: RE: 83 Honda Nighthawk 550

Just wanted to let you know, I received the part yesterday and put it on this morning. It works great, thank you.

Richard Talley


From: N Brown
Sent: Thursday, November 21, 2013 5:41 AM
To: brenda from bikeboneyard
Subject: RE: Cr 250

Hi Brenda,

I just received the gas/petrol tank for the ty80 and thought I would just let you know it had arrived, and thank you for your help I am really pleased with it.

Thanks again

Neil Brown


From: nated0g1
Sent: Tuesday, November 12, 2013 8:26 AM
To: brendaf@bikeboneyard.com
Subject: 99/00 kx 125 radiator

Hi Brenda,

I recently ordered a kx125 powervalve assembly from you which was shipped quickly and worked perfectly! I was wondering if you happen to have a 99-00' Kawasaki KX125 left side radiator (the side without the cap) available? The plastic mud gaurd would be great too.
If you've got one, let me know!


From: Manuel Gonzalez
Sent: Wednesday, November 06, 2013 3:54 PM
To: brendaf@bikeboneyard.com
Subject: RT1 parts

Hi: I'm a repeated customer of yours, the parts that I'm looking for the Yamaha RT1 360, front fender and bracket, tail light assembly and the air box. If you have the parts, let me know.

Greetings


From: Rev Decay
Sent: Tuesday, November 05, 2013 12:00 PM
To: brendaf@bikeboneyard.com
Subject: Parts

Hello,
I wanted to check on availability/condition/prices of a few parts.
Parts.
1. 80 or 81 cm 400 right side"airbox" cover
2. Xs 750 triple tank (76?) The one with factory knee dents.
3. 74 cb 360 tank.
I am able to provide pics if needed for reference of corresponding parts.
You may contact me here
I have heard some great things about your stock of parts and I am looking forward to doing business with you.
Thank you for your time,
Rev.


From: Lynn Powell
Sent: Monday, November 04, 2013 10:16 AM
To: brenda from bikeboneyard
Subject: Re: Front hub for 1975 Kawasaki 125 dirt bike

I got it today, Thanks a lot!
Lynn


-----Original Message-----
From: Orlando Naveo
Sent: Monday, October 21, 2013 2:39 PM
To: brenda from bikeboneyard
Subject: Frame

Just wanted to thank you for your help, just received the frame, thanks again and hope to do more business with you..... Orlando


From: kelleyperformance50
Sent: Friday, October 18, 2013 9:03 AM
To: brenda from bikeboneyard
Subject: RE: 1982 Yamaha it 175 j

I will pass on this one. Thanks for the honesty. Even a bigger fan of bikeboneyard!


From: KN
Sent: Saturday, October 12, 2013 6:35 AM
To: 'brenda from bikeboneyard'
Subject: RE: can am silencer

Thanks for the silencer! It’s perfect

Keith


From: Rob Vedro
Sent: Friday, October 11, 2013 10:10 AM
To: brenda at bikeboneyard.com
Subject: RE: 2001 kawasaki kx250

Awesome...can't wait. Btw. Great job Brenda. I have been searching for awhile. Tried a bunch of other places. They are lightyears behind you in their ease of use and customer care. Thank you. (As long as you send good parts ha ha) Ps . To the boss: Brenda deserves a raise.
Keep up the good work. You will be my first call next time.

Rob


From: Ken Alvin Monte
Sent: Thursday, October 10, 2013 8:41 PM
To: brenda from bikeboneyard
Subject: Kawi F7 fender

Hi Brenda - Just wanted to tell you that "You Rock!" Got the fender a couple of days ago - in super nice shape, way better than the wrinkled one currently on the bike now. Thanks so much for everything. Ken


-----Original Message-----
From: Joe
Sent: Thursday, October 03, 2013 5:07 PM
To: brenda from bikeboneyard
Subject: Re: 78 dt125 parts request

Thanks for the stator.Works great.I need a kick stater pedal my friend broke it today.


From: TR
Sent: Thursday, September 26, 2013 10:32 PM
To: brendanf@bikeboneyard.com
Subject: 1979 Yamaha XS1100 Parts

Hi Again,

I received the XS1100 Special Tank today from you and it was is very good condition (even better than expected). Thank you.


From: kelleyperformance50
Sent: Saturday, September 14, 2013 1:26 PM
To: brenda at bikeboneyard.com
Subject: RE: 82 yamaha it-175

I received my package in the mail today. It was a beautiful 1982 Yamaha it transmission! Thanks bikeboneyard. You have me as a returning customer!


From: kenthompsonhome
Sent: Friday, September 06, 2013 4:10 PM
To: brendaf@bikeboneyard.com
Subject: RE: YZ400 Monoshock

Thanks a million ! Just got the YZ400 monoshock and it works great on the YZ125! I'll be back for more stuff in the future!!!!


From: Kyndra Nevin
Sent: Wednesday, September 04, 2013 10:02 AM
To: BrendaF@bikeboneyard.com
Subject: Re: CX500 Throttle Assy

Brenda,
I received that throttle assy. really quickly and it works perfectly. Thank you. Could you also let me know if you have a tach cable for the same bike? Thanks. -Kyndra


-----Original Message-----
From: Cory Wilson
Sent: Wednesday, August 28, 2013 1:44 PM
To: brenda from bikeboneyard
Subject: Re: It 175 parts

Hi Brenda,

I received the tank. Works great. Thanks. Now I am looking for a front wheel, or at least a rim and possibly spokes as the spokes on the bike I am fixing up are loose and the nuts are rusted so I cannot tighten them. I see that you don't have a front wheel listed for the 1982 it175 but you do for the 1981 it175. The rim size I am looking for is 1.60x21. 36 spokes. Yamaha part number 94416-21234-00. I am pretty sure the '81 front rim is the same but can you tell me if the whole wheel is the same? I am also looking for a kickstand, don't see one listed on your site. Thanks again.
-Cory Wilson


From: Donna Fisher
Sent: Tuesday, August 27, 2013 8:23 PM
To: brenda at bikeboneyard.com
Subject: parts we ordered

My husband Jim Fisher wanted me to let you know that the parts we ordered from you were perfect, worked like a charm and now his Suzuki trike (that he built) is up and running and he is thrilled. Very good service, quick mail, thanks again for your help and great prices. Jim and Donna Fisher Green Kansas


From: Dave Gray
Sent: Wednesday, August 14, 2013 10:52 AM
To: brenda from bikeboneyard
Subject: Re: 99 kawasaki kx-250

I got it in perfect shape, Brenda. Once again, great transaction. You will be first I check with from now on. Thanks, Dave


From: mfarmanian
Sent: Thursday, August 08, 2013 5:04 PM
To: 'brenda from bikeboneyard'
Subject: RE: xt500 aluminum tank

The tank got here today. Very fair deal. Im very happy. Thank you!


From: Matt Boger
Sent: Tuesday, July 23, 2013 12:55 PM
To: brenda from bikeboneyard
Subject: Re: 79 yamaha yz-400

Got the shock. Works perfectly. Will be using you again.
Thank you.


-----Original Message-----
From: KAREN MANN
Sent: Monday, July 15, 2013 9:32 PM
To: brenda at bikeboneyard.com
Subject: Re: Derek Mann sent you

great service as usual.thank u so much for your help.if u find a 79 yz125 swingarm bolt in the next month just bill me for it and I will pay you.Derek


From: Phillip Bishop
Sent: Monday, July 15, 2013 1:55 PM
To: brenda at bikeboneyard.com
Subject: Re: kawasaki ex-250 mufflers
Hi Brenda,

I received the mufflers on Friday and put them on my bike on Sunday. They are great! Really nice condition, too. Awesome.


From: Toby Matney
Sent: Saturday, July 13, 2013 3:59 PM
To: brenda from bikeboneyard
Subject: Re: KDX 400 parts

Brenda,

As always I enjoy doing business with you. I will get a check in the mail Monday.

Have a great weekend.

Toby


From: Morgan Brodt
Sent: Friday, July 12, 2013 7:08 AM
To: brenda at bikeboneyard.com
Subject: Re: 87 kawasaki kdx80

Brenda, I recieved the parts yesterday. They look great! Thank you.


From: kohar1
Sent: Tuesday, July 02, 2013 3:16 PM
To: brenda from bikeboneyard
Subject: Re: 86 suz rm250 frame

I received the RM250 frame today. The frame is in good shape. I will definitely buy from you again. Thanks


From: David Graf
Sent: Monday, July 01, 2013 6:09 AM
To: brenda from bikeboneyard
Subject: Re: KT250 parts payment

Brenda,

As always this company is the best for used parts! I got all the items I requested and in good time.
I understand there is no feedback.....but your group always does an excellent job thanks again


dgraf


-----Original Message-----
From: Toby Matney
Sent: Saturday, June 29, 2013 5:05 PM
To: brenda at bikeboneyard.com
Subject: RE: My Check

Brenda,

My parts arrived today. Everything was as I ordered. You do a great job. I really like dealing with you.

Thank you,

Toby


From: Daniel Eckert
Sent: Saturday, June 29, 2013 2:43 PM
To: brenda from bikeboneyard
Subject: RE: Seat

Brenda, Got the seat. Thank you!

Dan Eckert
________________________________________



From: jjscycles1

Sent: Tuesday, June 25, 2013 12:26 PM
To: brenda at bikeboneyard.com
Subject: RE: 93 suzuki gsxr-750 carb set

Thank you brenda to be honest i love to do business with you if you dont have the solution u find one thanks will get it right now


-----Original Message-----
From: Britt

Sent: Saturday, June 22, 2013 7:57 PM
To: brendaf@bikeboneyard.com
Subject: Honda odyssey

I've been checking out your boneyard. Dang. Props for the best inventory in the world! I just saw this Honda odyssey and it says it runs and 250.00 or parting out with an extensive list. But is it still complete and is $250 correct for the whole buggy, Running? I could probably find a bunch of things to buy there. My original search is for a motor and some parts for a 1982 gs 1000 Suzuki The original katana. I need a gs 1000 / four valve / TSCC motor. Britt Turkington


From: Dave Katterheinrich
Sent: Friday, June 21, 2013 2:27 PM
To: brendaf@bikeboneyard.com
Subject: Honda Parts

Brenda,
Bought some parts last year(?)and need some more. Though it is not a big list at all. I am looking for the right foot peg and left foot peg for the rider/driver. These pegs according the parts book appear to be the same for CB 350,CL 350, CB 450, CL 450, CB 500/550,CB 750 all from the early to mid 70’s. I would like the complete assy. for each peg, such as the pin, spring, washers etc.. to be able to mount it on the foot peg mount that is on the a ‘73 Honda. The foot rubber would be great if they are in good shape, but face it, these pegs are old enough for me to know that I will be needing to buy brand new rubber for the pegs. So don’t worry about the rubber, new rubber looks good anyhow. I also need the kick stand spring from the same period of Honda. Last part I need (today) is a brake pedal from around the period of Honda. The part of the rear brake pedal I am really after is the pad that you press your right foot on to as I am going to be removing the pedal from the rest of the brake aasy. and welding this to an assembly I am fabricating for this café bike. It is not real important what this brake pedal is from as I will only be using the foot pad. My only real thing is I want the parts to be from a Honda. This bike is being built with the idea that all parts are Honda, so it could have been built by Honda. I hope my descriptions make sense as to what I am looking for. You may remember me from the past and my experience was good, so here I am again. Please tally up what you have and the prices plus shipping and I will be sending you a U.S. Postal money order.
Thanks!
David Katterheinrich


-----Original Message-----
From: Toby Matney
Sent: Sunday, June 16, 2013 10:57 AM
To: brenda from bikeboneyard
Subject: RE: KDX 400 parts

Brenda,

I dropped the check in the mail today (Sunday 16 June 2013) in the envelope is a list of the parts I am purchasing and a separate card with my shipping address.
You have a great web site.
Thank you for all the hard work.



-----Original Message-----
From: . rkelly2042
Sent: Wednesday, June 12, 2013 2:19 PM
To: brenda at bikeboneyard.com
Subject: RE: honda vf750c

I got my master cylinder and spring today. With the fast shipping and excellent prices I'll definitely be hitting you up when I need anything else. Thank you so much!

Rob


From: The Breazeales
Sent: Monday, June 03, 2013 10:04 PM
To: brenda from bikeboneyard
Subject: RE: yamaha dt1 68 left bar switch

Hi Brenda

Got the switch and installed it. Works Great! Thank you very much!! - Ron

________________________________________
From: shaun adams
Sent: Friday, May 24, 2013 12:37 PM
To: brendaf@montana.com
Subject: Kx250 parts

Hello I purchased a kicker for Suzuki recently from you and it worked perfectly. I live in North Carolina anyway looking to see if you have a cylinder jug for kx250 and rear wheel my year model is 1998 let me know and some pricing if you have any
Thanks
Shaun Adams


-----Original Message-----
From: Claude
Sent: Friday, May 24, 2013 6:06 AM
To: brenda from bikeboneyard
Subject: Re: 1983 YZ 100

Good morning Brenda.

Thank you very much for the super fast response. You guys are a great sounding business. I'm definitely keeping your info. Hope you have a great weekend.


From: spookybear8
Sent: Tuesday, May 21, 2013 2:14 PM
To: brendaf@bikeboneyard.com
Subject: Carburetor boots

Hello, had great experience with you before, this time I'm looking for carburetor boots (manifold, carburetor side) for an 81-83 Yamaha XJ Seca. Mine is a 750. Pretty sure your 650 will fit if you have them. Thanks for any response. Robert

From: Corsaer
Sent: Saturday, May 18, 2013 10:00 AM
To: brendaf@bikeboneyard.com
Subject: parts

Hello,
I purchased a complete R1 front end from you a few years ago and was completely satisfied with every aspect of doing business with you. So you were the first to come to mind on my latest project. I need a side-by-side gauge cluster of a speedo and a tach, preferrably in the 3" diameter range. It would be great if these were in a single housing, but I can deal with independent gauges as long as they match in looks. I also need a 36" speedo cable and a 24" single cable throttle assembly (or a 24" throttle cable alone if I can't get the entire assembly). It doesn't matter what make/model bike these come off from as it is for a custom build. Thank you David


From: Patrick Gregory
Sent: Sunday, May 12, 2013 5:31 PM
To: brendaf@bikeboneyard.com
Subject: 1986 KDX 200

Hi Brenda, don't know if you remember me, bought some parts for my 84-86 KDX 200,s from you last year and was extremely pleased with your pricing and service , as well your knowledge! Both bikes I am happy to say are running great but I need a few parts for my 86. Do you have a front cowl, front fender, seat and throttle? Please e-mail back as to what you have available from my "shopping list" and thanks again

From: Andrew Torosian
Sent: Wednesday, May 01, 2013 5:29 PM
To: brenda at bikeboneyard.com
Subject: Re: Yamaha SR250

HI Brenda

The kick stand works good. Thank you very much. I was wondering if you had a kick start lever or assembly for this model or one that would fit. Also do you have a picture of the side panels? I might buy both if you have them. Thank you
Andrew Torosian


From: Cleveland Topley
Sent: Friday, April 19, 2013 6:27 AM
To: brenda from bikeboneyard
Subject: Re: 1980 Honda custom 500

Thank you Brenda & Bikeboneyard. I plan on doing business with you in the future. We don't do a lot of motorcycle work, but do need a few parts occasionly. Sincerely, TOP CAT


From: Bill
Sent: Tuesday, April 02, 2013 2:12 PM
To: brenda from bikeboneyard
Subject: Re: seat

but u still have seat starter cover[is what i meant] and clutch cover.i'd like all three,i've done alot of business with u in the past and think ur awsome.i'll send money order for those three parts so please hold,it'll be on its way first thing in the morning
seat
starter cover
clutch cover
thanks


From: Richard Morris
Sent: Saturday, March 23, 2013 11:11 PM
To: brenda from bikeboneyard
Subject: RE: Gauges

Thanks brenda I tell all my friends about your place even people on 2strokeworld forum thank you so much!


From: Robert Hacker
Sent: Tuesday, March 19, 2013 3:06 PM
To: brendaf@bikeboneyard.com
Subject: 6whlr?

Hey Brenda, this is Robert in pine bluffs. The kicker for the it175 worked great its alive. Yz490 still dead..back to the old drawing board. Do you have a rotax 650 engine in your treasure chest? What flavor are the 6whlrs and can you send pictures of them? I've had a 73 hustler since I was a kid, & I might be game for another tub. Thanks


From: wiseguyri
Sent: Sunday, March 17, 2013 1:21 AM
To: brendaf@bikeboneyard.com
Subject: cb550

hello brenda this is riley ive bought some stuff in the past from you and have always been pleased with the outcome. im looking for a good complete set of carbs for a sohc honda cb550 and also the intake boots im on a budget and want to bring this old chop back to life can you help me out please and thanks riley


From: Bryan Cloyd
Sent: Thursday, March 14, 2013 12:17
To: brenda from bikeboneyard
Subject: Re: honda cb360

Hi Brenda!

Just wanted to say thank you for getting the parts out the door quickly, they arrived yesterday, and are in great shape!
I'm in need of a top triple clamp for my CB360- do you have one available from the CL/CB360's parts bikes you currently have in stock? I'm also looking for a right side muffler. If you have either in stock could you give me a quote for the parts?
Many thanks,

Bryan Cloyd



From: clubkoze
Sent: Monday, March 04, 2013 7:52 AM
To: brendaf@bikeboneyard.com
Subject: 72 Suzuki TS 185

Hi Brenda,

I received the fender, stator and light switch assembly. They all arrived in great condition as promised. THANKS Question- Do you have an ignition switch (With Key) for this 1972 TS 185 bike? The connector has about 9 wires and the switch has 3 positions. How about : • Headlight? (Bucket, Fork Bracket, Wiring)? • Petcock?

Thanks,

Tom


From: Kim Baird
Sent: Saturday, February 23, 2013 10:37 AM
To: brenda from bikeboneyard
Subject: Cagiva WMX 500

Hello, Brenda
I was wondering what parts you have left for the Cagiva WMX 500? I am looking for a complete bottom end, side plastics, carburetor boot that bolts on the engine side of carburetor. An updated list would be great.The wheels and other parts I have already gotten from you has ready made my bike stand out and it is really educating these young rider what a 500 two stoke can do. Thanks so much inclosed is a couple pics.The Bike Bone Yard Rocks!
Kim Baird


From: Kawasaki Putnam
Sent: Tuesday, February 19, 2013 11:00 AM
To: brenda from bikeboneyard
Subject: RE: kz750
Hi Brenda, i just recived the kz 750 b starter clutch rotor thank you very much for all you help. I was also wondering if you had any vulcan 900 oem exhaust. they have to be mint though no dings or dent. please let me know


From: Malcolm Hunter
Sent: Tuesday, February 19, 2013 4:41 AM
To: brendanf@bikeboneyard.com
Subject: Pursang wheels

Hi Brenda,I am after a front wheel and rear wheel off the pursang,,it can be also be from the Frontera 215 or the Pursang 192 these all have the Green Label Akront Rims,so No1- they need to be straight and not dented,........No2- Not deeply gouged,so they can be sanded and polished up.......,No3,If they have been standing in water the alloy can take on a porosity that can't be polished out,it is like black tightly knitted spotted areas, also if you can send the backing plate parts that have the brake shoes and the axles and nuts that would be great ,basically I will leave it to you to choose the best wheels that you have,I just bought a rim off E bay and it had that black spotting porosity, so it is useless if you want a perfectly polished restoration done,I haven't seen it before now so I am wary of it,but it is rare I'd say ,I have bought a rear wheel from you 5 years ago for a Pursang mk9 model 168 it was excellant........thanks heaps for your time........Mal Hunter


From: Dave Trainer
Sent: Friday, February 08, 2013 3:46 AM
To: brenda from bikeboneyard
Subject: RE: Tank arrival n condition
THANKS BRENDA YER THE BEST


From: FORREST WILLIAMS
Sent: Saturday, January 12, 2013 10:08 PM
To: brenda from bikeboneyard
Subject: RE: Throttle Assy

Brenda, I received the throttle assy. 1-10-13. Thank you for all your help to get this bike back up and running again. Brad


From: Joseph Melito
Sent: Wednesday, January 09, 2013 8:14 AM
To: brenda from bikeboneyard
Subject: Re: Can Am Frame


Hi Brenda

I received The Can am frame you sent me and I am very happy with it. With a little cleaning up and some paint it will be rolling down the trail this spring. I realized that I need a Bill of Sale in order to get a trail sticker I was wondering if you could send me one to make that possible.Again thank you very much. Will to do more business in the near future.
Joe


From: fkk
Sent: Thursday, December 27, 2012 3:12 PM
To: brenda at bikeboneyard.com
Subject: Re: yamaha yg

Brenda,
You are great!!! The parts arrived today. Very happy with the parts, very happy with the packing, Great service.
Fred Klopp


From: Edgar Secrest
Sent: Monday, December 24, 2012 4:04 AM
To: brendaf@bikeboneyard.com
Subject: cagiva wmx500 parts

do you still have the cylinder? if so does it have the water fitting on side? I want to buy the water fitting. i have bought many Cagiva parts from you in the past and have been very satisfied. ed


From: Eric & Pam Carmichael
Sent: Sunday, December 23, 2012 9:03 AM
To: brendanf@bikeboneyard.com
Subject: 1980 KX 125 parts

Hi Brenda,

My 81 KX 125 restoration is off to a great start. Your airbox and airboot were key pieces in my project.
Do you still have the rear fender and front number plate off the 80 KX? If so, are they in good usable condition without major cracks? Also, I don't suppose you have the green forkboots off the front forks? I imagine finding a set of those in good shape will be pretty difficult.
Thanks for your help. Have a great Christmas.

Eric Carmichael


From: Joseph M
Sent: Friday, December 21, 2012 6:43 PM
To: brenda from bikeboneyard
Subject: Re: 1984 Can Am 500MX Parts

Thank You Brenda you have been very nice to do business with and in a couple of weeks I will probably be looking for more parts. Thanks Joe


From: Jones, Rick
Sent: Friday, December 14, 2012 12:32 PM
To: brenda from bikeboneyard
Subject: RE: 1979 Yamah

Got It, alls good….


From: Tommy Marcotte
Sent: Monday, December 10, 2012 5:20 PM
To: brendaf@bikeboneyard.com
Subject: Re: RE: RE: 1975 yamaha DT 400

Thanks !!! Everything is awesome.


From: Leslie Tarwater
Sent: Wednesday, December 05, 2012 4:16 PM
To: brenda from bikeboneyard
Subject: Re: Reminder

Thanks. I've bought a Repro cable from the Orient thru eBay, and am making a cable to fit in the original conduit for the Oil pump. I'm buying some stuff from the Flanders Co., I used to ride my Triumphs down there for knick knacks when we were both in Pasadena, CA.
Anyway, you are my trusted used parts source and I tell those who are in need about your services.
Merry Christmas!


-----Original Message-----
From: Gerald
Sent: Tuesday, December 04, 2012 11:18 AM
To: brenda from bikeboneyard
Subject: Re:- carbs

Hi, The carbs arrived on Saturday morning. Very pleased with them ,if this was EBay I would give you a positive feedback. However it isn't EBay but I think you get the drift! Thanks very much Gerald


From: ferrelenergy
Sent: Monday, December 03, 2012 9:56 PM
To: brenda from bikeboneyard
Subject: RE: husky steel wr tank

Brenda: Wanted to let you know that the husky tank arrived today. Not only was the tank in excellent condition with very minimal dings, but also included the gas cap and petcock. What a deal ! Thanks so much for the great product and service. Thanks again. Mike Ferrell


From: Jim Griggs
Sent: Sunday, December 02, 2012 12:50 PM
To: brendaf@bikeboneyard.com
Subject: 1972 Kawaski s2 350

As per phone call . Please link me to PayPal for purchase . I will work on logistics in transport. It was good talking with you -- much appreciate the great service over the past as well.
Jim Griggs


From: Chris Sanders
Sent: Friday, November 16, 2012 6:37 PM
To: brenda from bikeboneyard
Subject: Re: Payment received

hey did you guys fly those panels here personally i got them today. excellent service and i could not be more pleased with the parts a little clean up and a couple of decals and im all set thanks for the prompt attention i will deffinetly recomend your yard in the future thanks again


From: Kristoffer Welch
Sent: Wednesday, November 14, 2012 9:15 PM
To: brenda at bikeboneyard.com
Subject: Re: yamaha dt175....correction. i found your order email

You Rock, Thanks.


-----Original Message-----
From: William.D.Johnson
Sent: Wednesday, November 07, 2012 6:49 AM
To: brenda from bikeboneyard
Subject: RE: Parts for 1972 Yamaha AT-2

Thanks Brenda. I actually received it the afternoon of your response. It's in great shape! I can't wait to do more business with you as my resources allow.
Thanks,
Bill


From: Eric & Pam Carmichael
Sent: Saturday, November 03, 2012 10:53 AM
To: brenda from bikeboneyard
Subject: Re: Kawasaki Parts

Brenda,

Wow, I just read your email and 2 minutes later the postal carrier delivered your package! Everything looks great - I'm excited to get my new restoration project in full gear now that I'll be able to safely start it with the air filter attached to the carb.
Thanks again. Hope to do business again.


Eric Carmichael


From: Eric
Sent: Wednesday, October 31, 2012 10:21 AM
To: brenda from bikeboneyard
Subject: Re: Payment received

Awesome thank you. Expect future buisness from me and will inform my other builder friends about ya
From: Eric & Pam Carmichael
Sent: Sunday, October 28, 2012 6:38 PM
To: brendaf@bikeboneyard.com
Subject: 1980 kx 125 airbox boot

Hi Brenda.

This is Eric Carmichael from Maryville, Mo. My good friend Tom From suggested I check out your website, as he has purchased some items for his Yamaha from you.
I just acquired a 1981 Kawasaki KX 125A-7 to restore, and I'm having trouble finding an airboot for the bike. I know that a few of the parts from the 80 kx were interchangeble; do you know if you 80 kx airboot would fit on my 81? I just ordered a parts manual for my bike today, so I'll know the pn in a week or so.
That you for you time,

Eric Carmichael


From: Stephen Hetzel
Sent: Monday, October 15, 2012 6:49 AM
To: brenda from bikeboneyard
Subject: Re: '75 KT250 Shifter

Brenda, I can't thank you enough for locating that air boot. Perfect.
You're the best.
Stephen


From: L. Phillips
Sent: Saturday, October 13, 2012 1:09 PM
To: brendaf@bikeboneyard.com
Subject: kt 250 tank

hello brenda i loved my sc 500 tank, please send pics of your kt 250 tank thanks again luke

From: Joe Dean
Sent: Saturday, October 13, 2012 12:58 PM
To: brenda from bikeboneyard
Subject: RE: honda trx250

I received the part for the trx250 fourtrax thank you very much do u have a nother


From: ron krill
Sent: Thursday, October 04, 2012 5:31 PM
To: brendaf@bikeboneyard.com
Subject: forks

got those front forks.great shape,real happy.like to do business with you more.let me know what kind of kawasaki f8 and f5 stuff you got.interested in a bottom end,which they are the same from 1971 to 1975 i think all rotary valved engines.stator plates of the f8 too


From: Jim Farr
Sent: Wednesday, October 03, 2012 10:26 PM
To: brenda from bikeboneyard
Subject: Re: 71 suzuki ts125

Cheers, heres hoping it does the trick if it isnt a stock replacement. I appreciate all the help youve given with my purchase, customer service is above and beyond. While Im messaging, would you happen to have a 71-72 ts125 tank, with little rust inside and orange for the paint?

From: Chris H.
Sent: Tuesday, October 02, 2012 6:15 AM
To: brendaf@bikeboneyard.com
Subject: Re: RE: triumph tail light

Brenda,


The Triumph tailight arrived in good order. I will be looking for more parts,,,,,maybe a bike or two as well.

Thanks for the great service!

Chris


From: Brandon
Sent: Saturday, September 29, 2012 5:59 PM
To: brendaf@bikeboneyard.com
Subject: Re: 72 honda xl250

thank you for the parts so much help me out alot hope to do bussiness with you again


From: greg_kiri@q.com
Sent: Thursday, September 27, 2012 7:05 AM
To: brendanf@bikeboneyard.com
Subject: Gauges

Could you send me a picture of the GPZ 550 gauges? The side panel you sold me looks nice on the bike.
Greg


From: Mike Hauptkorn
Sent: Wednesday, September 26, 2012 3:37 PM
To: brenda from bikeboneyard
Subject: Re: bultaco m-212

Recieved the M212 and was pleased with my purchase as usual. Keep finding those old Buls! thanks Mike
________________________________________

From: lou
Sent: Friday, September 14, 2012 5:49 PM
To: brenda from bikeboneyard
Subject: Re: photos

thanks for the volt. reg brenda... looks good ... looks right


From: Allen
Sent: Tuesday, August 21, 2012 9:20 AM
To: brenda from bikeboneyard
Subject: cable
Hey Brenda!

As per our conversation of today, please email invoice and send the Yamaha XS1100s speedo cable, via Priority mail. Previously ordered speedo and seat should then arrive at or about the same day. (Friday)
P.S. I've been restoring cars, and to a lesser extent, bikes for 40 years and have never encountered a more courteous, friendly, or cooperative dealer. Give yourself a pat on the back!

Thanks for being there... again.


Allen


From: Garrett Dryden
Sent: Tuesday, August 07, 2012 5:05 PM
To: brenda from bikeboneyard
Subject: Re: honda ct90

thank you very much, this part has been hard to find and you saved me a lot of money,thanks again ill recommend you to anyone else i know looking for parts

From: Brian Burkholder
Sent: Monday, August 06, 2012 2:21 PM
To: brenda from bikeboneyard
Subject: RE: XT550 part needed

Brenda,I received my oil plug today and it looks in near new condition..My old one had a hairline crack that was leaking oil..Thank you for the fast shipment..I will keep you in mind in the future if I need more parts from your 82XT motorcycle..Thank you,Brian Burkholder...

From: William Leason
Sent: Monday, July 30, 2012 10:50 AM
To: brendaf@bikeboneyard.com
Subject: RE: ktm rear caliper

Thank you that's what i like fast service...

Thanks for your order


From: bill heffron
Sent: Saturday, July 28, 2012 7:37 AM
To: brendanf@bikeboneyard.com
Subject: parts question

Brenda,
Bought a wheel from you last fall, worked out great. I am looking for the 3 exhaust flange bolts for the same bike. 78 Kawasaki KE250. Seems like any bolt will do, but not the case, these are hex head bolts with a philips drive as well which make installation / removal possible. If you have any, I would be interested.
thanks
Bill


From: Albert Magnan
Sent: Tuesday, July 10, 2012 9:12 AM
To: brenda from bikeboneyard
Subject: parts

Brenda, Thank You very much for the fine " good as new" head & cam for my 81 kawasaki 250 kl...I still need ,kick starter,front sprocket cover,and front brake cable,if you have them?? Let me know how much and I will send you a check..The bike runs super!! AL.M


From: backroadbiker
Sent: Friday, July 06, 2012 9:14 AM
To: brendaf@bikeboneyard.com
Subject: Carburetor Needle

Hi Brenda; Let me first say, the parts I bought from U- last winter, really saved my Bacon, on my 2-Classic Yamy XS-11s.. Everything was great. Except my clumsiness. In cleaning and checking the used carbs., before I installed them, I dropped a Slide and the tip of the needle broke. The bike runs great with them except it takes a long time to return to idle when I make a stop.. (Has to be due to the broken needle, allowing feul flow.) The carbs. are from 1982-Yamy. XJ-11 .. I realize U-may not be want to sell just a needle from a slide, but I would be willing to purchase a whole or partial item if U-had carbs that were to far gone to sell, but had a good needle, on or off the slide.. Please let me know.. Thanks a heap for takeing the time to help out an appreciative old rider.
George D. Jones


From: jeff alexander
Sent: Tuesday, July 03, 2012 11:34 AM
To: brendaf@bikeboneyard.com
Subject: 74 cb450 side covers?


since I had such a good experience with you, I thought I'd hit you up again.
no rush, but wondering about side covers for a cb450. here's the tricky part, they have to match the tank in the enclosed pic, not faded, not really dinged up either. the pictured tank is a 71, but will fit my 74. Always wanted a blue/greenbike.

lemme know some time.
jeff alexander


From: Brian Nutter
Sent: Sunday, July 01, 2012 8:44 PM
To: brenda from bikeboneyard
Subject: Re: Yamaha RD Stuff

Thank you do much for the parts! My little mutt street tracker will be that much better because of you! I'm sure you get this all the time but, if you get a set of RD250/350/400 forks with the disc brake setup or wheels in, hit me up. Thanks again!

-Brian


-----Original Message-----
From: Daniel
Sent: Tuesday, June 19, 2012 8:34 PM
To: brendaf@bikeboneyard.com
Subject: 2001 Suzuki rm 250

I have a 2001 Suzuki rm 250 and I'm lookin for a fuel tank. Didn't see one on your parts list but I thought I would check first before I went to other sites. My roommate has ordered many 3 wheeler parts through your website and was satisfied with the price and condition of the parts he received. Looking for a fuel tank for a 2001 Suzuki rm 250. Used or a replacement tank thank u.

From: mahevufarmltd
Sent: Tuesday, June 19, 2012 12:39 PM
To: brenda from bikeboneyard
Subject: Re: 71 honda sl-350, excellent, hard to find better one - $1500 (florence)

what an awsome website,very impressed,keep up the great work,i should mention if you came across a good tx 750 yamaha,1973-4,in original order i would be interested ,i will check your bikes for sale on a regular basis,that sl350 was a good buy,good luck to the new owner,i was too slow! all the best,
murray bain,
n.z.


From: Paul
Sent: Wednesday, June 13, 2012 7:09 PM
To: brendanf@bikeboneyard.com
Subject: GL1100 carbs

Brenda

I have heard a lot of good things about your Motorcycle Boneyard. I am looking for a carb rack for a gl1100. Do you have more than the one you have listed for the 82? Also a phone number so I can give you a call.
Thanks Paul


From: Joe L.
Sent: Wednesday, June 06, 2012 7:34 PM
To: brendaf@bikeboneyard.com
Subject: RE: Yamaha XS Fender

Brenda,
Got the front Fender, all was as promised, will contact you again soon for further parts! Thank you for such service!
Joe / 76 Yam xs650c in restoration Ps, bikeboneyardhomeofthesquaredeal4me-uaswell?



From: jeff alexander
Sent: Friday, June 01, 2012 11:47 AM
To: brendaf@bikeboneyard.com
Subject: RE: 450 gear shift lever

thanks so much! splines looked great and part was in overall good shape. I will def. do business with you again in the future.


From: Ken Clarke
Sent: Thursday, May 31, 2012 8:29 AM
To: brendanf@montana.com
Subject: Kh400 kh750


Hi Brenda,

I have several bikes I need parts for and have had great stuff from you in the past. I see you have a KH400 and KH750 on your site. I am interested in any mudguards for both. For the KH400 I need a grab rail, and gear lever and gear change outside mechanism as mine has poor chrome. Please let me know what you have. Do you have any GT250 mudguards, especially the rear. I am interested in any GT model front mudguards also as long as they are reasonable condition. Kind regrads Ken.


From: Albritton, Mike
Sent: Tuesday, May 29, 2012 6:33 AM
To: brenda from bikeboneyard
Subject: Horn

Got the Horn, works great!

Thanks Brenda


From: Neil Barker
Sent: Tuesday, May 29, 2012 6:04 AM
To: brenda from bikeboneyard
Subject: Re: exiter 185

thanks anyway, like your site. very easy to look around. to many people work hard at complicating things. I learned my abc' still remember them pretty well.


From: Steve Whiteside
Sent: Thursday, May 24, 2012 8:40 AM
To: brenda from bikeboneyard
Subject: RE: Address

I recently order a cylinder and piston from you for a 1983 IT 490. It was in great condition! Thanks! Any chance you still have the kick starter?


-----Original Message-----
From: David Cooper
Sent: Thursday, May 17, 2012 3:25 PM
To: brendaf@montana.com
Subject: Hello I orderd the rear tell piece from a 77kz 650 just wondering

If have sent yet. I recieved the carb for the yz 250 works great thank you


From: Daryl Bain
Sent: Thursday, May 17, 2012 10:33 AM
To: brendanf@bikeboneyard.com
Subject: 1981 CT110

Good morning,
I see you have a front end listed for a Ct110. I am in need of a good set of fork tubes but would buy the complete fork set. If you would please pull the boots back and check the condition of the tubes for me. Thanks for your time,
ps, got your info from Lelands Honda, they say you are great


From: Dave Colonel
Sent: Tuesday, May 08, 2012 11:28 PM
To: brenda from bikeboneyard
Subject: bike parts-XL100

I received the parts today, Thanks for shipping so quickly, Tomorrow I should get it all together and will see if I need the speedo or anything else.

I do see the headlight housing on this one is broken.
Will let you know by tomorrow evening.
Best


From: Patrick
Sent: Wednesday, May 02, 2012 10:13 AM
To: brendaf@bikeboneyard.com
Subject: HONDA CBR 600 F4I ENGINE

HEY….first of all, your adorable, cute, and you like motorcycles……winner….sorry about cat…..not fun…….do you have any complete engines for 2006 honda cbr 600 f4i liked your you tube video……..please let me know .


From: Sean Wies
Sent: Monday, April 30, 2012 11:25 AM
To: 'brenda from bikeboneyard'
Subject: RE: 78 Honda atc90

Got the parts and they fit great. Thanks so much.
Sean


From: Brian W. Tracy
Sent: Wednesday, April 18, 2012 10:32 PM
To: brendanf@bikeboneyard.com
Subject: '75 DT 400 Stator

Hello Brenda!
It was a pleasure doing buisness with you last time and it appears like you have some more parts I need. On your website it says you have a '75 DT 400 stator for $80 and a CDI for the same bike for $80. My question is are these units taken from a running bike? Also do you have any kind of return policy if I find that either of these don't work? If I find that either one doesn't work can I return it, or get a refund? I would also like to buy the rear finder for the same bike. I need both the inner and outer fender. If you only have one, I would like to take one from a '75 or '76 DT 250. Thanks you!
-Brian


-----Original Message-----
From: Michael Wall
Sent: Wednesday, April 18, 2012 9:45 PM
To: brenda from bikeboneyard
Subject: Re: Yamaha 1973 CT3. Mounting brackets completely different. Another picture to follow

Thanks Brenda! I have enjoyed doing business with you.
Mike Wall


From: Howell A. Hall
Sent: Monday, April 09, 2012 2:34 PM
To: brendaf@bikeboneyard.com
Subject: 1977 IT 250 parts

Hi Brenda. You may recall that I just bought some parts from an IT 400. They came in fine. I just saw that you recently got in a 1977 IT 250. Are parts still available? I was looking at the cases, crank and head. Also, I don’t see a kickstand listed. Is that available and the tool pouch as well? Thanks.


From: Starkey, Rodger A
Sent: Wednesday, April 04, 2012 12:02 AM
To: brenda from bikeboneyard
Subject: RE: CR480 Kick Starter

Brenda,
Thanks very much. The kickstarter arrived yesterday and I am very happy with it and your service. On your website you list some maico square barrel parts but they are described in one part as 400 and another part as 360. I would be interested in the transmission and the barrel if it is , in fact, a 360. The 360 barrel has the compression release in the front (near the port with 4 screw holes) and the 400 has the compression release at the rear (near the port with two studs). Can you please identify precisely what you have and give me a price, including freight, to Australia. If pictures were possible, that would be great. Regards, Rodger Starkey


From: michael reilly
Sent: Monday, April 02, 2012 8:36 PM
To: brendaf@bikeboneyard.com
Subject: re: front brake master cylinder IT 200S

Brenda,
I just wanted to say thank you for sending me the right front brake master cylinder for my 1986 IT 200S. I really appreciate the effort taken to correct the problem of the last one not working on my bike because it was hitting the throttle. We hooked it up today and have it working now. What a relief to have working front brakes. Thank you again and I will be highly recommending your business to all my friends. Thank you again from Buffalo New York.
Sincerely, Michael Reilly

From: Travis Miller
Sent: Monday, April 02, 2012 12:08 PM
To: brenda from bikeboneyard
Subject: RE:

Just received the seat and fender. Look great thanks again!


From: Dave Katterheinrich
Sent: Thursday, March 29, 2012 10:11 AM
To: brendaf@bikeboneyard.com
Subject: Parts Here


Brenda,
The parts just arrived. These are perfect, exactly what I need. Thanks for getting this squared away. I hope we can do business in the future and that would be a good time to make it right with you, instead of making the UPS richer. I can for see a set of gauges in my future off of a '72 or there abouts CB/CL 350. These would be the metal gauge housings, that sit in a stainless mount. Also still looking for that rear taillight off of a CB 160, that has the small lens with the simple mounting bracket. Not the bigger mounting bracket off of the bikes around '72. I am not saying it has to be off of a 160 either, but of a Honda around that time frame with again the small lens and mounting bracket. Thanks again,
Dave Katterheinrich


From: Michael
Sent: Wednesday, March 28, 2012 5:45 PM
To: brenda from bikeboneyard
Subject: Re: Bill of sale..1982 KZ1100

Thanks you guys are the best..!!


From: Pascal GARNIER
Sent: Wednesday, March 28, 2012 6:20 AM
To: 'brenda from bikeboneyard'
Subject: RE: exhaust pipe and silencer of your YZ 125 1979.

I Brenda,

I received the exhaust, it is very well
Thank you for all


Best regards

Pascal GARNIER


From: Kurt Griffin
Sent: Tuesday, March 27, 2012 6:46 AM
To: brenda from bikeboneyard
Subject: Re: Shock IT250

Thanks for the quick response and for having the parts I needed.
Kurt.


From: Travis Miller
Sent: Monday, March 26, 2012 1:33 PM
To: brenda from bikeboneyard
Subject: RE:

You guys are awesome! Ship everything
Thanks again!!!


From: MacBook Pro
Sent: Saturday, March 24, 2012 11:03 PM
To: craigslist.org
Subject: honda s-90 cafe racer, excellent - $1500

** CRAIGSLIST ADVISORY --- AVOID SCAMS BY DEALING LOCALLY ** Avoid: wiring money, cross-border deals, work-at-home ** Beware: cashier checks, money orders, escrow, shipping ** More Info: http://www.craigslist.org/about/scams

your bikes are awesome just wanted to say major props you would do a killing if you lived in portladn i lived there for 30 years now in idaho falls,and just love your bikes !



From: Dave Trainer
Sent: Monday, March 19, 2012 2:18 AM To: brenda from bikeboneyard Subject: RE: monoshock

Hi yeah boy it was stuck but I got it out. I want to thank you one more time someone said a used monoshock would have to be rebuilt. I put it on and got lots of dampening not all springy like the other one Its great a nd we had a great day ridin thanks to Bikeboneyard. You ought to make up some stickers sayin like Used parts from BIKEBONEYARD for customers to put on trailers pickups toolboxes etc a little advertising around the vintage scene wouldnt be bad. Thanks again Dave. PS do you have two side cover plastics for a 78 YZ> lemme know please


-----Original Message-----
From: Richard Wright
Sent: Sunday, March 18, 2012 6:33 PM
To: brenda at bikeboneyard.com
Subject: Re: The 78 xs 400 with four pics for 750

Wow I gotta tell ya I'm pretty impress that on a Sunday I got such a fast response. Thank you for that. I am very eager to deal with your company now and I went ahead and bookmarked your page to do so here in the near future. Thanks again and hope to buy many parts and or bikes from you. Just for the sake of wondering how much would it cost for you to ship a bike to Louisville ky ? No rush on thAt and just a ballpark estimate would be great. Like I said that 400 would have been grey for my wife and I'll prob be buying the next run and driver Yamaha that ya get like that 400. Thank you again.


From: Dave Trainer
Sent: Thursday, March 15, 2012 10:27 PM
To: brenda from bikeboneyard
Subject: RE: monoshock

Hi ya My shock just got here the old one was all spring no dampening this one feels good once again Bikeboneyard comes thru
. I noticed ya cut this off the swingarm rather than un bolt it? Am I gona have trouble un bolting that wierd lookin bolt? hope not thanks again Im ridin saturday Yeeeeehaaaaa Thanks Brenda

From: ROSEMARIE CARTER
Sent: Thursday, March 15, 2012 5:18 PM
To: brendaf@bikeboneyard.com
Subject: 1983 gs750

hey i need a good working carb set for a 1983 suuki gs 750. honestly i dont want them if i have to go through aand rebuild them. I have bought parts from you in the past and was always satisfied with what bought. your honest and i respect that. let me no if you got it.


From: Rene Thebault
Sent: Tuesday, March 13, 2012 1:55 PM
To: brenda from bikeboneyard
Subject: Re: kawasaki kh400

Hi Brenda
Just want to say that the quality of the KH400 parts is very good and I am pleased with the delivery. Tell me if you get any more kh400 parts in top condition Rene


-----Original Message-----
From: Michael Wall
Sent: Friday, March 09, 2012 10:10 PM
To: brendaf@bikeboneyard.com
Subject: Parts of a CT2 Yamaha

Brenda, I am looking at your list of parts of a Yamaha CT3 (same as
CT2). I am interested in the bar switches, exhaust and turn signals
front and rear. I have a couple of questions. Could you please email
so I can buy these items. I bought a carb for the same CT2 a couple
of years ago (is working fine) thanks
.
Mike Wall


From: Don Planalp
Sent: Thursday, March 08, 2012 10:13 AM
To: brenda from bikeboneyard
Subject: Re: XT500 Skid Plate?

You came through for me again. I'll take it if it's intact -- send me an invoice.

A couple days ago, I started and rode, for the first time, my XT500 that I bought a year ago for $350 as an incomplete, disassembled pile of parts. Without the Internet and salvage yards like yours, projects like this would be tough.
I like to think of myself as a "green" person -- I reducing my carbon footprint by recycling old enduros instead of buying new ones! Or maybe I just like old motorcycles .


From: mark scovel
Sent: Sunday, March 04, 2012 11:21 AM
To: brendanf@bikeboneyard.com
Subject: 1979 cb650 sissy bar

Thanks for the front speedo gear a few weeks ago it worked perfect . now I was hoping that you would have a sissy bar for my bike , if you could get back to me that would be great. Thanks Bryce sumner


From: Mark Phelps
Sent: Monday, February 27, 2012 8:15 AM
To: brendaf@bikeboneyard.com
Subject: RE: 1985-1987 Suzuki LT 230 quad chain

BRENDA, I WANTED TO THANK YOU FOR TELLING ABOUT THE CONNECTION ON MY NEEDED CHAIN. YOU WERE COMPLETELY CORRECT ABOUT THE PRICES, ETC. I JUST ORDERED ONE THROUGH THEM AT ONLY $31.99 FOR BRAND NEW HEAVY DUTY O-RING TYPE CHAIN #520 AND I WAS WILLING TO BUY A SALVAGE ONE FOR THAT MUCH MONEY..... THIS IS GREAT TO STILL ABLE TO SAVE A LITTLE MONEY ON THIS STUFF, AS YOU KNOW IT CAN GET SO EXPENSIVE. ANYWAY, THANKS AGAIN, IT IS MUCH APPRECIATED.......MARK.

From: Jared Templin
Sent: Wednesday, February 22, 2012 5:19 PM
To: brendaf@bikeboneyard.com
Subject: RE: Shipment Notice: A package has been shipped to you

Great, Thanks for the quick reply and service!

From: ron krill
Sent: Tuesday, February 21, 2012 3:11 PM
To: brendaf@bikeboneyard.com
Subject: RE: cylinder

got the head and cylinder.excellent shape and bored .5mm over,perfect for my .5mm piston,thanks


From: LC
Sent: Monday, February 20, 2012 4:07 PM
To: brenda from bikeboneyard
Subject: bars

Thanks for shipping the bars! I'm stoked to start building my super trail bike. Thanks to all of you for being a "do right" dealer. I look forward to doing more business with you.

Larry Cundiff


From: Ricky Stewart
Sent: Saturday, February 18, 2012 7:43 AM
To: brendaf@bikeboneyard.com
Subject: Tank

Thanks so much ,it came late yesterday. Sorry to be a bother. thanks again for the tank.


From: john wallace
Sent: Friday, February 17, 2012 4:11 PM
To: brenda from bikeboneyard
Subject: RE: RE: 79 xs 1100 parts

Thank you brenda and the crew title arrived last week and frame showed up today cant explain how happy i am to have all the parts i needed and the quick work you guys do. The only thing im waiting for is saddle bags but im sure they will show in next couple of days
Thanks again
john


From: Steve Natt
Sent: Thursday, February 16, 2012 3:17 PM
To: brenda from bikeboneyard
Subject: thanks for sending the switchset.

It's really nice - much appreciated.
I've been working a lot this week on other stuff- havent gotten to sorting/packing/weighing yet.
I'll try to get to it tonite.

thanks

Steve Natt


From: todd moser
Sent: Thursday, February 16, 2012 8:03 AM
To: brendaf@bikeboneyard.com
Subject: YZ490 head

Brenda:

I received the head yesterday. Thank you so much for the prompt service, I look forward to doing business with you in the future!!!
Todd Moser


-----Original Message-----
From: Joe Mertis
Sent: Friday, February 10, 2012 10:22 PM
To: brenda from bikeboneyard
Subject: Re: Suzuki tc185

Thank u for helping me with everything and being very professional


From: backroadbiker
>
> Sent: Tuesday, February 07, 2012 12:35 PM
> To: brendaf@bikeboneyard.com
> Subject: Yamaha XS-11s
> Hi Brenda; George Jones here.. My carburetors got here today.. > They are > great and already in service. Once running, I learned I also
> need a voltage > regulator-rectifier for the same bike-1979 Yamy XS-11F std... > The Stator > was okay, but I'll just keep the one U-sent me for a spare.. > Assuming you > have the voltage regulator-rectifier, please send it the > quickest way > posible, and I will sign off for it on pay-pal as soon as I see > it on my
> screen.. You people are so good, I know I can trust you. Thanks > a heap.. > Take care.
>
> George D Jones


-----Original Message-----
From: Jeff Ecker
Sent: Monday, February 06, 2012 6:52 PM
To: brenda from bikeboneyard
Subject: RE: NEED HODAKA DIRT SQUIRT SHIFTER

Brenda, I received the shifter and it's a real nice one! Thanks! Jeff Ecker


From: neuman
Sent: Thursday, February 02, 2012 10:53 AM
To: brenda at bikeboneyard.com
Subject: Re: yamaha lt2

.Brakes came yesterday. Thank you.

Putting them on today. Wing ding ding ding.


Scott Neuman


From: mario delceppo
Sent: Wednesday, February 01, 2012 7:15 PM
To: motorcycle boneyard
Subject: RE: 85 xt350 fueltank

Received the tank. THANK YOU!!!

Mario Delceppo


From: Rich Tanguay
Sent: Monday, January 30, 2012 11:13 PM
To: brenda from bikeboneyard
Subject: Thanks!

My tank is so much better than I expected! Thannks Brenda.


From: adam hernandez
Sent: Sunday, January 29, 2012 12:06 PM
To: brenda from bikeboneyard

Subject: Re: Yamaha Fuel Tank

Received the Yamaha fuel tank yesterday. Looks great and I'm looking forward to putting it on the bike.
Do you have a carburetor assembly that would fit onto a yamaha 1978 xs 750? I believe it would be 3 mikuni, constant velocity, 34mm carbs. I believe the set I have has been messed with a lot and it is causing the bike to have a lot of starting issues so I am looking for a better set that preferably came off a running bike and aren't in to bad of shape.
Any help would be appreciated and thanks again for the tank.

Adam


From: daisydog95
Sent: Saturday, January 28, 2012 4:06 PM
To: brenda from bikeboneyard
Subject: Re: 80 can am airbox top

You rock thanks!


From: backroadbiker
Sent: Saturday, January 21, 2012 8:11 AM
To: brendaf@bikeboneyard.com
Subject: Yamy. XS-11E Left-Side panel

Hi Brenda; I love your web site. Wish I had found it years ago. Great Cat too. We have one that looks identical...LOL..
Yesterday, I bought a set of carburetors, through Pay Pal and I know they will be heading here shortly.
If the Left Side Panel, from the 1978 XS-11E, Maroon, Is in good condition and still lockable, (The latch on mine is broken.) I will buy it for $50.. thru. Pay-Pal. Thanks.. George D Jones


From: Ken Decker
Sent: Thursday, January 19, 2012 6:06 PM
To: brenda from bikeboneyard
Subject: Re: 1976 Yamaha DT 175 Engine

Brenda,

Received the Yamaha DT 175 motor, looks pretty sweet. Just wanted to say thank you.

Ken


From: Rodney Davidson
Sent: Wednesday, January 18, 2012 10:33 PM
To: brendaf@bikeboneyard.com
Subject:

Do you have any after market pipes/expansion chambers for old kawasaki f7 175cc and a old kawasaki g5 100cc?. may be even some thing I could modify to work from like another 175cc center port-canam 175cc? left hand side up pipes for either or good down pipes?. Thank You, Rodney Davidson

PS you have a very fun site lots of cool bikes! where do you live because you have a nice view of the mountains!.


From: bill heffron
Sent: Wednesday, January 18, 2012 5:43 PM
To: brenda from bikeboneyard
Subject: Re: 78 kawasaki ke-250

Hi Brenda,
Just an f.y.i. if you haven't shipped yet, UPS I prefer as street address works fine, if you send U.S. Postal then include P.O.Box . Gotta tell ya, I love your website, its easy to navigate & find stuff. Other salvage sites I looked at I didn't like so much, to busy & to many clicks to find what I need they don't have. I think you got it right. thanks again,
Bill



-----Original Message-----
From: Tater Tot
Sent: Wednesday, January 18, 2012 12:35 PM
To: brendaf@bikeboneyard.com
Subject: My pump...

Thank you for the prompt shipping of my fuel pump. It arrived tuesday the 18th. of January. It will be on the bike this weekend when I get a chance to put it on


From: James Helton
Sent: Wednesday, January 18, 2012 9:15 AM
To: brenda from bikeboneyard
Subject: Re: Front end (again)

Hi Brenda,
The box arrived yesterday and it looks great!
Good thinking to pull the springs out and collapse the forks.
Good boxing to protect everything too.
The hub wore a hole in the side of the box but there is no damage.
I am very happy with your recommendation of the MR250 front end.

Thanks again and I will be buying more before long I have no doubt.

Especially when you make that walk around video and I can see all the parts you have.
I have a lead on a Triumph rear conical hub for my Rickman so I am hopeful that works out. Before long I will have a rolling chassis that I can ride down our hill. Some day I will find a TR6 engine...

James


From: Scott Nicholas
Sent: Sunday, January 15, 2012 4:58 PM
To: 'brenda from bikeboneyard'
Subject: Used Kawasaki F7-175 forks and carb

Brenda,

The forks and the carb have arrived safely and look to be in VGC.


From: rick hooper
Sent: Friday, January 13, 2012 3:04 PM
To: brendaf@bikeboneyard.com
Subject: forks

my kz forks just came today and they look great.... thanks.. :)


From: Dean Woodruff
Sent: Friday, January 06, 2012 8:08 PM
To: brendaf@bikeboneyard.com
Subject: RD200

Hey Brenda,

I recently bought a gas tank for a 1972 RD200.
Thanks. It was in pretty good shape just as you said.

Noe I am looking for the plastic spacers that go between
the carburetors and the intake. Do you have them ?
They slide over the intake ports and the carbs slide
over the plastic spacers.

Thanks
Dean


From: Johnny S
Sent: Friday, January 06, 2012 7:04 PM
To: brendaf@bikeboneyard.com
Subject: Clean CT70's

Hi Brenda,
Happy new year!!
This is Johnny I purchased your CB550, and I love it!

I'm in the market for some Honda CT70's, late 70's or even better early 1980's or even 1990's. I'm also interested in Honda z50's as well.. Please keep me in mind or in the loop on any of those...
Thank you, take care..


From: Serened A Valsalam
Sent: Thursday, January 05, 2012 5:42 AM
To: brendaf@bikeboneyard.com
Subject: Re: Shipment Notice: A package has been shipped to you

Dear Brenda,

I recieved the package today,I am very happy as the items were just as your pictures.I am very satisfied!Thank you.
My bike is with the mechanic right now,would you be able to ship me out with new engine spares?Do let me know as i would efinitely love to do business with you again.



-----Original Message-----
From: Tferrari58
Sent: Wednesday, January 04, 2012 5:39 PM
To: brendaf@bikeboneyard.com
Subject: TOTALLY AWESOME ... ATC 90 Tire
Wow that's all i can say this tire is absolutely perfect and it is incredible that you actually sent the axle with it and the bolts .... You went totally above and beyond for me.. I cant wait to get diving into this restoration project especially now that i know i have someone that is gonna be great to deal with to get those hard to come by parts .. Thank You again !!

Super Happy Customer ,



From: Mike Mehak
Sent: Monday, January 02, 2012 9:33 AM
To: 'brenda from bikeboneyard'
Subject: RE: yamaha dt1

Hi Brenda
I just wanted to let you know I received the part and it is exactly what I needed.
Thank you very much for your help and excellent service.

Please have a Happy New Year.
Mike


From: Seth Tieden
Sent: Friday, December 30, 2011 12:11 PM
To: brendaf@bikeboneyard.com
Subject: Parts and prices

Brenda,

I purchased a set of forks from you a while back and was very pleased. I am looking to continue work on my bike, and need prices and availability on some more parts. Here is what I'm looking for: - front right turn signal, with stem to attach to the mount bracket.
- rear end grab bar. (fender stay?)
- original sissy bar.
Also, would shipping for these items still be $20.00?
Looking forward to hearing back from you, thanks for your time.


From: Brandon Eldridge
Sent: Thursday, December 29, 2011 8:13 AM
To: brendaf@bikeboneyard.com
Subject: I need a polaris part

hello,
My name is Brandon I live in Greensbor North Carolina and i have bought some parts from you a number of times over the past 7 years or so, i am in need of a part and i did not see it listed on your website, and i was wondering if there was a possibility you have one, or know of one avaible some where. i need a used rear axle for a 2003 polaris scrambler 500 4x4. also i purchased a axle off of ebay for this machine and it was the incorrect one, it is for a scrambler prior to 12/3/01, where the rear brake is mounted on right side of the rear axle aginst the wheel and only threaded on the right side aginst the axle carrier for the sprocked hub, unlike mine where the rear disc is located aginst the left side of the axle carrier and the sprocket is mounted aginst the right side of the axle carrier, so it is threaded on both sides. so if you have a use for this i would be willing to sell it very cheap to you if you could use it. please let me know if you have an axle for my machine or not thank, Brandon


From: ken clarke
Sent: Wednesday, December 07, 2011 6:00 AM
To: brenda from bikeboneyard
Subject: Thank you


Hi Brenda,
I received my mudguards yesterday for a GT380 and KH400 that I bought a few weeks ago. I am so happy with what you sent and just can not thank you enough!!I am totally over the moon and I can now push on with my bike restorations. I am still looking for a rear mudguard for a KH400 or KH250, the little chrome one, a grab rail for the same bikes and a front and rear mudguard for a Suzuki GT250, mine is 1977 but any year will do. If you get any of these, could you please let me have first refusal. A friend on mine has a GT750 Suzuki and wants a rear mudguard for that also so please bear that in mind as well. Thank you so much, I hope to do business with you again!!


Kind regards Ken.


From: Dave Walton
Sent: Friday, December 02, 2011 12:26 PM
To: brenda from bikeboneyard
Subject: Re: polaris 325

Hi Brenda First of all, thanks for the great transaction. The motor was exactly as described, is in the Polaris already making hot laps around the farm! Do you still have the carb that came off that Polaris motor?? How much are you asking for it?? I'm looking for one to put on the old motor I'm rebuilding. Thanks!
Dave


From: Stephen Smith
Subject: 75 honda 400 four carb set
To: brendaf@bikeboneyard.com
Date: Tuesday, November 22, 2011, 9:19 PM
hi this is Stephen here , I have bought a lotta great things from you before. I need to know if you still have nthe carb set, and if they are usable as I was burned on my last ebay set. Thanks Stephen


From: Alberto Paquet
Sent: Saturday, November 19, 2011 7:23 AM
To: brenda from bikeboneyard
Cc: Kurt Feero
Subject: shipment

Hi Brenda, every thing arrives good and complete yesterday, thank you, Alberto.


From: Marc Solomon
Sent: Thursday, November 17, 2011 6:49 AM
To: brenda from bikeboneyard
Subject: Re: RE: 1973 Indian Enduro ME 74

Hiya, Praises to the Bikeboneyard! Got the kicker for my '73 Indian Enduro yesterday, snapped it on, and rides & smiles commenced! No more bloody bumping her:) My entire ordering experience was a delightful; from a prompt email response, courteous and knowledgeable phone conversion, and fast delivery. Yous are spot on. I would highly reccomend using your service to anyone in need. Keep up the indespensible work. Top job!
Cheers,
Marc 'King' Solomon
Ps. Pics to follow!


From: Paul Repak
Sent: Wednesday, November 16, 2011 9:00 AM
To: 'brenda from bikeboneyard'
Subject: RE: yamaha dt1 71

Just wanted to say thanks.
Steve Williams of TX recommended you highly.
He does a lot of Hodaka restores and presently obtained a vintage RM370. I have just acquired (2) 1971 Yamaha DT1E 250's and I am looking to restore both. One for the road and one for the dirt. I am hoping you will be able to help me with these projects. I may be needing the wire harness and other items, but I wanted to start hooking up what I have. They are presently stripped down to the frame.
Thanks again,

Paul Repak


From: rcoll45
Sent: Sunday, November 13, 2011 8:44 AM
To: brendaf@bikeboneyard.com
Subject: Re: Rack for Honda - Thank you!

Hello Brenda,

The bike rack was perfect. Thank you again for another great purchase. Later!

Regards,

Richard


From: Michael
Sent: Saturday, November 12, 2011 11:33 AM
To: brenda from bikeboneyard
Subject: Re: 1982 Kawasaki KZ1100 frame & swing arm

Got the frame yesterday all is good..! You guys are great..!!

Thank You
Mike


From: louis mielke
Sent: Tuesday, November 08, 2011 8:38 PM
To: brendaf@bikeboneyard.com
Subject: 93 cr500 triples

Hi Bikebone yard,


Had great dealing in the past, back for more!

I notice you have a 93 honda cr500 for sale. I'm in need of triple trees with a good stem/bearings/nuts. Any luck? Still have these items?

Price shipped to 21048 please. Thank you.

~ Louis


From: Ed and Rosie
Sent: Tuesday, November 01, 2011 8:46 PM
To: brenda from bikeboneyard
Subject: Boneyard Praise! AAAA++++

Hi, I need a rear wheel for my XT 550. I order one from the yard and it was great!! Super easy to deal with. Also, got the backing plate, and drive side too. And the rear axle!! Looks brand new. No rust it all. Not like e-way. Thinks again bikeboneyard!! So, Buy here first!! AAAA++++++


From: Alison Abels
Sent: Saturday, October 29, 2011 12:33 AM
To: brenda from bikeboneyard
Subject: Re: 79 kawasaki kz-400 ltd

Hi Brenda,
Received parts look good. Thank you. Do you have the wiring harness? Alison


From: smdardin
Sent: Thursday, October 27, 2011 6:56 PM
To: brenda at bikeboneyard.com
Subject: Re: rekluse z start pro clutch for 2000 honda cr-500

Hi Brenda,

Got it today. What a great easy transaction. Thank you.

Do you sell other new parts or just mostly used?

-Steve


________________________________________ From: Bill
Sent: Wednesday, October 26, 2011 9:04 PM
To: 'brenda from bikeboneyard'
Subject: RE:

Hi Brenda

It was nice to meet you. I enjoyed doing business with you and I am sure I will do more in the future. The little Honda is a nice example for its age and I appreciate your honest representation of it.

Best Regards

Bill


From: Aaron Feist
Sent: Monday, October 17, 2011 10:10 PM
To: brenda from bikeboneyard
Subject: Re: Project Bike

Brenda,

Made it home safely. Froze my thumbs off on the drive home. Fun, nevertheless. Bike drove well. Already thinking about what to tune up first. Thank you for the sale. I'm happy with the purchase.

Aaron


From: Will Moller
Sent: Monday, October 17, 2011 5:22 PM
To: 'brenda from bikeboneyard'
Subject: Kick start lever

Hi Brenda. Thanks for the shocks. They are on the bike and look great ?

Next part – do you have a rust-free and no chrome peeling kick start lever for a ’77 KZ650? Mine is in terrible shape.
If you do, please send picts.

Will


From: N Garcia
Sent: Saturday, October 15, 2011 2:28 AM
To: brendaf@bikeboneyard.com
Subject: Re: RE: RE: RE: RE: RE: RE: DT-100 A or B Yamaha enduro

, Just wanted to thank all of you at the bone-yard, I recieved all the items i orderd and everything is wonderfull. you can bet I will be back for more just as soon as I can bye for now and a great big THANKS !!

From: Robert Borella
Sent: Thursday, October 06, 2011 1:18 PM
To: brenda from bikeboneyard
Subject: RE: 1984 Suzuki RM125 dirt bike
Hey Brenda ; You are a JEWEL ! Just got home ! guess who was in my driveway ? The butcher squad (UPS) . The box was Hammered ! The driver looked Scared when he saw ME Glaring at him as soon as he opened the door . I ripped open the box w/ him watching , but NO pressure (Yeah right) . He was falling ALL over himself about the condition of the box .
Everything is in good condition & in order ! Thank God ! I'm SOOOOOO happy w/ you , Brenda ! I would LOVE to to business in the future w/ you ! We need to find some other shipper . They ALMOST ruined my "mechanical romance" ! Thank you SO very much ! I now am a proud "Dad" of twins ! ..... Twin RM125s !


-----Original Message-----
From: chris burton
Sent: Tuesday, October 04, 2011 7:06 PM
To: brenda from bikeboneyard
Subject: RE: MSN-Request: 1973 Yamaha 1973 tx500

parts arrived today
i like the looks of them
if i need anymore i will come to you

thank you
chris


-----Original Message-----
From: support
Sent: Friday, September 30, 2011 10:08 AM
To: brendaf@bikeboneyard.com
Subject: Greetings!

I recently bought a set of carbs from you..
good transaction.


I need the choke cable bracket for a 1982 Yamaha xj650rj. Picture attached. It is the bracket that goes on the #4 carburetor.


From: Mark Plante
Sent: Monday, September 26, 2011 6:57 PM
To: brenda from bikeboneyard
Subject: Re: honda cb350 tank

Hi I got the tank today looks good thanks


From: Darwin
Sent: Saturday, September 17, 2011 11:35 PM
To: brenda from bikeboneyard
Subject: Trx350 1986
hi....received front final drive and very satisfied,,,,,,,,now looking for rear brake cam lever with cable nuts,,,,.#43410-ha7-671,,,,do you have??? Tks Darwin harrison


-----Original Message-----
From: Scott Copeland
Sent: Saturday, September 17, 2011 12:13 AM
To: brenda from bikeboneyard
Subject: Re: RE Parts

Hi Brenda-
The switch arrived today. Thanks for the great service!
I am also
interested in the '75 CB400F exhaust you have listed for $75- could you please send me a picture? Talk to you soon.
-Scott


From: kevin hutchison
Sent: Wednesday, September 07, 2011 8:38 AM
To: brenda at bikeboneyard.com
Subject: Re: left and right control pods for 79 xs-1100

brenda
i've seen a video of you on you tube, and my goodness, you are quite a cutie.

best wishes,

kevin h


From: Justin Schuster
Sent: Tuesday, September 06, 2011 8:18 PM
To: brenda from bikeboneyard
Subject: Re: R1 stator

Brenda, Thank you so much for your consideration and for such a quick response. The Stator will be in the mail tomorrow. I was rather devistated today when I figured out that all those magnet pieces that I pulled out of the generator were originally attached to the rotor, and not the stator. I appreciate you generosity so much, and if I could make one more small request; Is there any way you could get a good look at the magnets on the inside of the rotor, and just contact me if you find anything wrong? (just don't want to end up in the same spot i'm in right now ;-) I'm officially Bike Boneyard's biggest fan! Thanks, Justin


From: peter gard
Sent: Sunday, September 04, 2011 1:15 AM
To: brendaf
Subject: RE: 73H1 500 KAWASAKI

Thank you very much..i had a complete kawasaki rear wheel & hub from you about 5 years ago ..very nice...im on my holidays at the moment but im home next week and as long as you still hace it il do a paypal ..does the tank have a cap by the way?...regards pete.


From: Tony Swaim
Sent: Wednesday, July 27, 2011 12:12 PM
To: brenda from bikeboneyard
Subject: Re: R6 Parts

You are going to take all of my money.

For the Yamaha LT2 do you still have:

Tank Ignition (key) Kicker shocks Fenders exhaust pipe

Thanks. Your site is great. I'll be telling everyone I can about it.


From: boostghost
Sent: Sunday, July 24, 2011 8:49 PM
To: brenda from bikeboneyard
Subject: Re: Adam Boughner sent you $90.00 USD

Hi Brenda,

Thanks again for the carb holders. I was wondering if you have any engine covers for the left side of a 77-78 Honda CB750F.
Thanks again!

Adam


From: Bo Tucker
Sent: Tuesday, July 19, 2011 11:08 AM
To: brendaf@bikeboneyard.com
Subject: Bike Boneyard contact

Good morning,

I was given a link to your website from a guy I bought some parts from on ebay. The site is awesome and I can't tell you how jealous I am of all those bikes.

I'm working on a 74 MT125 and a 78 SR500. I just wanted to touch base and see how up-to-date the site is today. First time I am looking for is the MT wheels and a tracker style tank that will fit the SR. I prefer something that's stock from another bike and looks good/fits, or a XR750 style tank. I thought you would have a world of great suggestions. thank you for your time and I look forward to hearing from you!
Bo Tucker, EI


From: roywilson134
Sent: Monday, July 18, 2011 7:48 AM
To: brenda from bikeboneyard
Subject: RE: 1981 Honda cm400 E parts

Hi Brenda, I got the seat and it looks GREAT!! Thanks for your help.
Roy


Subject: RE: some prices: Robert Borella
Sent: Saturday, July 16, 2011 11:01 AM
To: brenda from

Hey Brenda ; Just saw your You Tube show . 1984 Suzuki RM 125 ! Wicked AWESOME score ! I have one of these bikes too ! LOOOOOOVE IT !!! One of my best bikes . Picked it up at a local swap meet a couple of years ago ! Short money too .

Bob


From: Chris Hayes
Sent: Friday, July 15, 2011 8:14 AM
To: brendanf@bikeboneyard.com
Subject: front fender

Hi Brenda, I see on your website you have a front fender for a 2002 EX-250 (Ninja). I have purchased parts from you before, was satisfied and want to buy some more. Please let me know if you have the part and send me the paypal link. Thank you.
Chris Hayes


From: BRUSH62
Sent: Wednesday, July 06, 2011 6:25 PM
To: brendaf@bikeboneyard.com
Subject: Honda xl500s

I have bought parts off of you before and I was very pleased with my purchases. I am restoring a 81 Honda xl 500s, and of course I need parts. If you can help me I would really appreciate it. Parts needed.
Choke cable. Front chain sprocket. Air box. Turn signal control unit. Rear brake light assy. Head light. and some more stuff I cant remember right now... Thank you in advance for your help...... Bradley


From: timmalcolm
Sent: Friday, June 17, 2011 3:56 PM
To: brenda from bikeboneyard
Subject: Re: Hi I'm looking for

Thankyou very much it was nice doing bussiness with you and I'll keep you in mind in the future. Tim Malcolm

From: Will Clack
Sent: Monday, June 13, 2011 12:31 PM
To: brendaf@bikeboneyard.com
Subject: 43 mm forks and triples for a 79 cr 250

Brenda,
A few months ago we bought a set of 43mm forks of you,they work an absolute treat.
We are currently getting another 79 cr250 up together,have you another set of forks and triples ? Also need a airbox,footrests,brake lever,exhaust and silencer,gear lever and kickstart,oh yes and all the engine mounting bolts.....any chance ?? This is a big ask !! Would you sell the motor and carb off of the TT 500 flattracker ??


From: Robb Stack
Sent: Monday, June 13, 2011 8:54 PM
To: 'brenda from bikeboneyard'
Subject: Robb says Thanks

Brenda:

Don’t know how my address got as mixed up as it did. Looked like mix of home / work addresses with a bad street number and wrong Zip. But it’s here now and YSR – 50 head looks good. Thank you.

Robb Stack


From: Kevin Pierson
Sent: Sunday, June 12, 2011 3:05 PM
To: brenda from bikeboneyard
Subject: Re: 1997 yamaha timberwolf

thanks for lookn, you guys still rock. best bone yard


-----Original Message-----
From: Rafael Ziah Franco
Sent: Monday, May 16, 2011 9:43 PM
To: brendaf@bikeboneyard.com
Subject: Accessory Question

Hi guys,

You came recommended from Kahuna Power Sports in Toronto

Do you happen to have a sissy bar + back rest combo for a 1982 Yamaha Maxim XJ 650?

Please see picture attached.


From: Todd Lemke
Sent: Tuesday, April 26, 2011 5:42 PM
To: brenda at bikeboneyard.com
Subject: RE: Notification of payment received

thank u brenda the stator has great spark & thank u for a resanable price i will do more buisness with u in the future i still cant get the bike to fire up i dont understand why my local yamaha dealer says they dont have the valve clearances which thats where my problems are so im very frustrated but at least i have spark now thank & i will need parts in the future i love building bikes & muscle cars

From: John Hauck
Sent: Thursday, April 21, 2011 10:41 AM
To: brenda from bikeboneyard
Subject: 82-83 yamaha it 175

Thanks for the great parts very pleased I need 2 other items if you have them let me know Cylinder head and cylinder jug and if its in good shape and doesn’t need bored ill take piston also Thanks customer for life

From: Jock Davidson
Sent: Tuesday, April 19, 2011 10:50 PM
To: brendaf@bikeboneyard.com
Subject: After Some Pics Please
Importance: High

Hi there,

I have had a good look through your site and I am after a few parts, depending on their
condition and whether or not you still have them available.

Could you please provide pics of the following ASAP:

I have bought from you in the past (some Yamaha IT490 bits and pieces) and I was very happy with your service. If you could get back to me with the pics that would be great.
Thanks

Jock


From: Chris Leslie
Sent: Monday, April 18, 2011 7:28 PM
To: brendaf@bikeboneyard.com
Subject: CR480 parts

Looking for a 83 cr480, mid pipe(small pipe in the middle of exhaust) carburator,and intake, cost per item with shipping,and cost as a whole with shipping.Thx Brenda, Btw that cr480 motor i bought off you awhile back works great,Thx again

From: JnS DnC
Sent: Monday, April 18, 2011 9:24 PM
To: brendaf@bikeboneyard.com
Subject:

Hello, I have ordered parts through you before and everything was perfect. I was just wondering if you had a kickstarter (I need the lever plus the shaft that goes into the motor) For an 82 xt125. If so how much would it be?
Thanks
Jason


-----Original Message-----
From: James, M D
Sent: Wednesday, April 13, 2011 8:35 AM
To: brenda from bikeboneyard
Subject: RE: EXTERNAL: hodie forks

Very happy with these forks! Thank you Brenda.

Mike James


From: Kenny Tucker
Sent: Monday, April 11, 2011 1:27 PM
To: brendaf@bikeboneyard.com
Subject: SL 350 frame

Brenda,

Received the SL350 frame today, very nice. Thank you for the prompt service.
Kenny Tucker


-----Original Message-----
________________________________________
From: Knipes, Bradford
Sent: Sunday, April 10, 2011 6:30 PM
To: brendaf@boneyard.com
Subject: ossa stiletto motor

Hi Brenda,

I really appreciate your operation! ...and your politics!


From: Terry
Sent: Tuesday, April 05, 2011 7:42 AM
To: brendaf@bikeboneyard.com
Subject: Re: Yamaha HT1 Parts


I received the parts yesterday in good order.
Thanks Again
!

Terry


From: Robert Borella
Sent: Sunday, April 03, 2011 6:19 AM
To: brenda from bikeboneyard
Subject: Re: some prices

Hey Brenda ; I found your YouTube channel . It's Wicked 'effin' Cool !!! NOTHING beats vintage 2-strokes STILL alive & kickin' . Fun watching that old yz465 wheelie w/ no effort . Brings back memmories of open class 2-strokes when I was a "ladd" . SWEEEEEEEET !!!! Roll more footage please . You got some Awesome ridin' around your house . Bob


From: Wayne Boggs
Sent: Friday, April 01, 2011 5:36 PM
To: brenda from bikeboneyard
Subject: Re: honda vf750 magna

Got them today. Already gave your web address to all my buddies that mess with old bikes. Thanks again.

From: sowhat70
Sent: Wednesday, March 30, 2011 9:51 PM
To: brendaf@bikeboneyard.com
Subject: Thanks

Brenda, Thanks, I received the SL350 tank today. better inside than I had hoped, nice ! 72 should be changed to 77 for the Spring St. address. got here any way, I'll be ordering again. Very Appreciated ! Gerry Rice.

From: Jamie @ Car Parts Direct
Sent: Monday, March 28, 2011 3:39 PM
To: brendaf@bikeboneyard.com
Subject: HONDA PART
I have bought parts from you in the past and have been very pleased. I am hoping you can help me out with another part I am looking for. My customer has a 1979 Honda CB750F and he is needing a coil. Do you have anything there that will work? Thanks, Jamie

From: Tim and Deb
Sent: Sunday, March 27, 2011 7:21 PM
To: brendanf@bikeboneyard.com
Subject: 83xr80

Brenda I have an 84 xr80. Engines the same? Tim Funkhouser PS Thanks for the xl200r wheel plus tire and sprocket. Saved me a bit of money.

From: Robert Borella
Sent: Sunday, March 27, 2011 6:24 AM
To: brenda from bikeboneyard
Subject: Re: some prices

Hey Brenda ; JUST found your YouTube show . Wicked 'effin' Cool !!!! Where do you find all these old rides in great condition ? You take me back to when I was young when I watch them being rode around . Montana looks like a VERY rider friendly state , is it ? If I lived near your area , I WOULD be riding (something) EVERYday !


From: Peragino
Sent: Saturday, March 19, 2011 5:19 PM
To: brendaf@bikeboneyard.com
Subject: yamaha 250 air cooled

Hi you helped me out before and got
sum bikes from you ( 74 kx 125 ) 75 mx 175 )
looking for an air cooled yamaha yz or mx 250 motor complete with electric coil stator thanks JOE

-----Original Message-----
From: RThompson
Sent: Friday, March 18, 2011 8:35 AM
To: brenda from bikeboneyard
Subject: RE: sx 175 forks

Brenda, I picked up a 500cc Kawasaki triple last week out of a guy's back yard. Looking to sell it .. Parted out, it should at least double that. If you like, I'll send photos. Also, looking for 125 Honda trials bikes or parts at this time.
The 175 forks looked and fit great


From: Jake Meeks
Sent: Thursday, March 17, 2011 12:37 PM
To: brenda from bikeboneyard
Subject: Re: kawasaki klt200

my parts came in today. looks like its all in good shape. thank you for your help and i have 3 more im building and i will be checking with you again. thanks


From: Shawn Alston
Sent: Monday, March 14, 2011 10:07 PM
To: brenda from bikeboneyard
Subject: Re: RE: RE: RE: Hey I'm needing a tank for an 83 cx650 custom. U have1? 9039183947

Got that tank! Wow, better then I expected! Any other parts u might have?
S.


From: al gooday
Sent: Monday, March 14, 2011 6:38 PM
To: brenda at bikeboneyard.com
Subject: hell yeah!

she's running like a top! 110 miles in the last two days. Cant thank you enough. Lots of people comment on how great it looks for a '74. i tell them where i got it. this is a sweet ass bike.
little bike, but sweet.
You know what they say about guys who ride big bikes and drive big trucks, right? Same thing they say about a big belt buckle.... its a tombstone for a dead d__k.
Thanks again!
now that the weather is breaking, i'd like to come up and look at the mirror, and possibly some kick start levers. i am beginning to think i may have to do a little welding to get a kick start lever that will get around that exhaust. if i start with the honda KS lever and weld in a little extension piece, i may be in business.
al


From: Trude, Michael
Sent: Monday, March 14, 2011 12:34 PM
To: brenda from bikeboneyard
Subject: Re: 1977 yamaha dt 400


Hello the axle arrived safely, Thanks Mike Trude


From: taylor huffman
Sent: Thursday, March 10, 2011 9:46 PM
To: brenda from bikeboneyard
Subject: Re: RE: RE: RE: Cx500

Awesome. Thank you very much. I've only heard good things about your company so ill be orderin that master within the next day or so. And thank you for the quick email responses.


From: danny feyaerts
Sent: Tuesday, March 08, 2011 1:46 PM
To: brendaf@bikeboneyard.com
Subject: RE: motorcycle parts

Hoi Brenda,
Thanks for the fast delivery for the parts I ordered to me I have a question for you, found a decent tank for my SUZUKI RM 125 1975 model, but the guy only sells it to the United States, it would be a great help for me if you bought the tank for me and then sell and transport it to me Hoping for an answer and that you can help me with this please Danny


From: William Leipnitz
Sent: Tuesday, March 08, 2011 11:12 AM
To: brenda from bikeboneyard
Subject: Re: cb400a

Arrived his morning, thanks. All parts look good.


Sam Jarvis to me
show details Feb 22

Brenda,
Got the parts today. (1980 xl250s cylinder head/cap) They look really great; light years better than the chewed up parts I’m replacing them with. Thank you again. I’ll keep your business in mind for any future project and will pass your name along. Regards,
Sam


From: Michael Couch
Sent: Monday, February 21, 2011 4:00 PM
To: brenda from bikeboneyard
Subject: Re: RE: Notification of payment received

YIPPEEEKIAYEAH!!!!!! Got the parts today. Thanks so much!


From: Jonathan Southard
Sent: Saturday, February 19, 2011 1:16 PM
To: brendaf@bikeboneyard.com
Subject: Searching for a Part

Hi Brenda, I recently found your Bike Boneyard website and have really enjoyed browsing through all of the neat bikes, reading your political commentary, and reading about the exploits of the boneyard’s furry friends. The boneyard sounds like my kinda place! The reason I am writing you today however, is because there is a part I am having a difficult time locating for a 1973 Honda XL175. I picked this bike up recently from a guy who had it stashed in a barn for the last 15 years, and it’s only got 2500 miles on it and is in overall very good condition. The main reason the bike was parked is because the kicks tart return spring had snapped. I have been researching this bike for a couple of months now and while there seems to be a lot of sources for most parts for these bikes, I’ve come to discover the kick start shafts and springs were these bikes’ weakness. As a result I have not been able to locate a spring for the kick starter. (Hopefully you are not smiling and sadly shaking your head at this point knowing my search may take years!) If by chance this is something you can locate for me or have in stock you would be helping me immensely to put this neat example of an early enduro back on the trails and road where it belongs. If the spring needs to be sold as part of the kick start spindle component group, that’s OK too. Please let me know if this part is something you can locate or provide me. Best regards, and keep up the good work in keeping so many great old bikes alive and their riders smiling! Jonathan Southard


From: John Brown
Sent: Wednesday, February 16, 2011 9:07 AM
To: brenda from bikeboneyard
Subject: RE: mt 250

thanks, i dont know what happened but the carb is here and looks great if i need more parts i will call you first, has it happens i need some side covers for a honda 1976 cb 750 burgundy color. JB


-----Original Message-----
From: Daniel DiRocco
Sent: Tuesday, February 15, 2011 10:28 PM
To: brenda from bikeboneyard
Subject: Re: campera

Sorry about that. Just got them tonight and they look great. Thanks a lot.

-----Original Message-----
From: RThompson
Sent: Tuesday, February 15, 2011 10:20 AM
To: brenda from bikeboneyard
Subject: RE: sx 175 forks

Forks arrived in great condition. Will check with you when looking for other parts.

currently have a 74 H2 Kawasaki in the workshop that I'm on the fence about fixing or selling. Haven't posted it for sale anywhere, thought I'd check with you'all first.


-----Original Message-----
From: smarshburnjones
Sent: Friday, February 11, 2011 3:58 PM
To: brenda from bikeboneyard
Subject: RE: atc110

Hi, Brenda I just wanted to tell you Thank You for my current order it came today everthing is good and the tires fit good. Have a wonderful weekend.
-- Patrick E. McGirl "Chubby"


-----Original Message-----
From: Josh Ervin
Sent: Thursday, February 10, 2011 9:59 AM
To: brenda from bikeboneyard
Subject: RE: Gas tank


Brenda,

Just wanted to follow up and see if the other tank has been shipped and if I could get a tracking number? Do you have any more of those tanks? I like them so much I think I want one for my cb550. I'm just now disassembling my cb.but when I need something for it I'm gonna ask you first. Your service is great. You should definitely be proud of that cuz it's hard to find these days. If you're really interested in the cx500 google cx500 cafe racer. There is a really sweet one that pops up.
Thanks again,
Josh


-----Original Message-----
From: Josh Ervin
Sent: Monday, February 07, 2011 5:29 PM
To: Josh Ervin; brenda from bikeboneyard
Subject: RE: Gas tank


Hey, Just found the link to pay for the other cx deluxe tank. I had the shipping address changed to my father's in Albuquerque. I received my tank today. Its in fantastic shape. How'd you know we were doing the cafe racer's? Do you get a lot of guys looking for the same stuff asking for the same bike? Or did you see the Cafe racer show? LOL! Do you guys have any CB550's or 500's motors in good shape. I just bought one and the motor is rough and in 3 different boxes. Hoping to find a donor motor or replacement. I'm sure the shipping would be a little much but could I get a quote.
Thanks for your help
Josh


From: Justin Parchman
Sent: Thursday, January 27, 2011 7:13 PM
To: brenda from bikeboneyard
Subject: RE: 75 honda 250 rear wheel

Hey Brenda,
Thanks for the quick service.
Have a great day.
Justin



From: Robby Carns
Sent: Wednesday, January 26, 2011 2:11 PM
To: brendaf@bikeboneyard.com
Subject: 1979 yz125

Hey I got my package for my dirtbike today. Thank you SOO much! I haven't got around to fixing it since the first week of July! Let's hope it works.
Thanks Again,
Robby Carns


From: Kyle Constantino
Sent: Monday, January 24, 2011 6:27 PM
To: brendaf@bikeboneyard.com
Subject: Re: RE: RE: RE: RE: RE: 1990 cr125r

Thanks! Its in great shape ....I will let you know if I need something else


From: Tim Jones
Sent: Sunday, January 16, 2011 1:41 AM
To: brenda from bikeboneyard
Subject: Re: from tim in wilmington

wow you were quick on that response! i didnt expect to hear from you until like.....monday! ok, do you have a tranny for my '82, and how much would you want for it if you do? also, i want you to be able to confirm that it is indeed an '82, so the VIN is 4V5-000804. that nine-digit VIN messed with everybody! BTW, the kick-starter...............FIT LIKE IT GREW THERE! thanks again Brenda, youre awesome!
Tim ________________________________________


From: ANTHONY OSMOND
Sent: Tuesday, January 11, 2011 3:58 PM
To: brenda from bikeboneyard
Subject: RE: 68 honda cb-450 black bomber parting & honda ca-77, parting

Brenda I have recieved the light you sent out . Thankyou it works great. If you have any more honda cb450 Black Bomber parts as in Speedo/Tac ,Exhausts Rear Shocks,Seat,Tool Box and a CA77 (305) Fuel tank . I am looking to purchase these items. Thanks Again Tony


From: Jeff Lang
Sent: Monday, January 10, 2011 10:50 AM
To: brendaf@bikeboneyard.com
Subject: '73 Rickman Cappra


I thoroughly enjoy your site and have read many positive things about your service. I am currently restoring a ’74 Rickman and was interested in obtaining some small odds and ends if they are in decent shape. More specifically, original hose clamps (they should be Centoflex British Made I believe) and various other bolts if they are not too rusty and still have the original plating. A picture of the bike would be ideal, but I don’t want to take up too much of your time for very small-ticket items. I look forward to your response. Thanks a lot,


From: dwane goodell
Sent: Wednesday, January 05, 2011 1:27 PM
To: brenda from bikeboneyard
Subject: Re: 650 Savage exhaust

Thanks for your help, Brenda. As I get into this bike I'll be asking you for more parts. Dwane


From:_2745d1efecb29a80
Sent: Tuesday, January 04, 2011 9:57 PM
To: brendaf@bikeboneyard.com
Subject: RE: husky mj seat

Brenda: The Husky seat arrived yesterday looks just as you described it, restoring an old 450 from the frame up, will have the pan plated and recovered it will work out well, Thanks Was wonder what the tank off that 450 looked like, was it the metal with chrome and paint, if so were their any dents. Walt Brown


From: dwane goodell
Sent: Tuesday, January 04, 2011 10:20 AM
To: brenda from bikeboneyard
Subject: Re: 650 Savage

Brenda, The exhaust for my Savage arrived. I'm using it in a rebuild of an insurance total and I need to document everything I buy for it. Please send me an official looking receipt. Thanks for your good service. Dwane Dwane Goodell


From: Robby Carns
Sent: Thursday, December 30, 2010 5:24 PM
To: brendaf@bikeboneyard.com
Subject: 1979 yamaha yz125

Hello my name is Robby Carns and I am from a town called Clearfield, Pennsylvannia. I have a 1979 yamaha yz125. I was riding it one day and I did a hill climb, and it was like a mountain, not high, or steep, but you went up one side and down another and on the way up I must have hit a rock or something and when I was going down the other side I hit my back brakes and I was not slowing down. So when I got to the bottom I shut off the dirtbike and looked at the back wheel where the brake shoes SHOULD be... but that was it... there were no brake shoes or covers or that kind of stuff. This incedent happened around July 1st of this year. I still did not get it fixed yet and I want to ride her SO BAD. My Uncle Mark said that the best thing to do is to find a rear rim with all the correct stuff (right size and everything), like sprockets and brake shoes and covers and stuff. I looked on eBay today and seen one for $99.99. Too much I thought. Plus I do not know if it had all the stuff on it that I need. My uncle said that he bought stuff off you and he said he recieved some good quality stuff and he told me about this website.
So may you please find something for me... PLEASE! If you do, e-mail me back . I would be very happy.

P.S. - I do not care how much it cost but can you try to find it under $100.00? If the shipping comes out to be more than that, that is alright. Tell me about it. My mom or my uncle might pay for it. Thank you.

From: Tim Jones
Sent: Monday, December 27, 2010 5:31 PM
To: brenda f
Subject: from tim in wimington


Hey Brenda, and good day to you! I want to express how much i appreciate your service. Today (Monday) i got the kicker i ordered and i could not be happier! There are a lot of "jack-leg" sales-people that would have sent just the starter arm WITHOUT the "boss". i was ECSTATIC to see that i received the entire assembly! trust that in the future, if i need parts, i WILL contact you, and only you! Also, the people i ride with will know about you, your website and your company. I went through the ringer trying to find this part and not only did you deliver, you did it in SPECTACULAR fashion! i wondered about how long it would take to get the part, but it was so much faster than i anticipated! THANK YOU SO MUCH, and i will promote your business to anyone i know who needs your services!!!! Thank You, Brenda, your loyal supporter,
Tim

From: Justin Parchman
Sent: Friday, December 10, 2010 6:29 PM
To: Brenda
Subject:

Hey Brenda, Thanks. I really like the gas tanks you sent. I look forward to doing business with you again. Thanks a lot.
Justin


-----Original Message-----
From: steven l dembinski
Sent: Thursday, December 02, 2010 10:36 PM
To: brendaf@bikeboneyard.com
Subject: 1978 suzuki ds 80 flywheel cover.

The cover came today and I installed it on my bike. I am happy with your service. Thank you. Do you have the oil tank cover Left side? Thanks ____________________________________________________________


From: mlunstra2
Sent: Thursday, December 02, 2010 9:30 AM
To: brenda from bikeboneyard
Subject: Re: You've got money!

Hi Brenda,

Thanks for the prompt response. As you noticed the lighting stuff is indeed primo. Just let me know if someone turns up in need of it. Really appreciate your fantasmo service.

From: mlunstra2
Sent: Thursday, December 02, 2010 2:24 AM
To: brenda from bikeboneyard
Subject: Re: You've got money!

Hi Brenda,

I received the cover I ordered and it worked just fine. Thanks for the great service.

I have a complete lighting (minus taillight lense) set up for the Yamaha mini enduro that includes many obsolete and rare parts. See attached pics. Are you interested in buying it? If you are make me an offer.


From: Ricardo Nuñez
Sent: Tuesday, November 30, 2010 9:25 PM
To: brendaf@bikeboneyard.com
Subject: RE: Need info

I got it.
Thanks a lot.



From: Roy Jones
Sent: Tuesday, November 30, 2010 6:10 PM
To: brenda at bikeboneyard
Subject: parts

Thank you For sending the parts out so quickly. It has been a pleasure doing business with you. Take care, and have Happy Holidays!!


From: Tom Sargis Jr.
Sent: Wednesday, November 17, 2010 3:46 PM
To: brenda at bikeboneyard.com
Subject: Re: 74 DT 175 ????

Just received the stator and flywheel, thanks so much. Excellent pristine parts. Just what I needed! Again, I'll keep coming back and I still love your packing materials! :-)

Tom


-----Original Message-----
From: Kevin Booher
Sent: Wednesday, November 17, 2010 1:51 PM
To: brendaf@bikeboneyard.com
Subject: 1981 cb750k

Hey
I'm not sure if you can help me or not. I have a 1981 cb750k and I'm missing the side panels for it. I've bought from you in the past (I've even sent some friends your direction) and remembered that sometimes you may have parts that just came in or aren't on your list yet and was hoping you might be able to help me out. They don't have to be from that exact model or year for me, so long as they will fit that model and year. Any help you can give me is greatly appreciated. Thanks for your time,
Kevin


From: Bob Burroughs
Sent: Sunday, November 14, 2010 10:30 AM
To: brenda at bikeboneyard.com
Subject: Re: Fuel tank for 1972 Honda CL175

Hi Brenda:

Received the tank on Thursday. Looks good. I'll seal it and paint it and it should work fine.

Have a good weekend and thanks a bunch.

Cheers,
Bob.


From: al gooday
Sent: Saturday, November 13, 2010 11:19 AM
To: brenda at bikeboneyard.com
Subject: Re: honda

hey brenda.



i rode it around my hood and then to work...i love it.
it attracts a lot of attention, for sure.
thanks again!
al gooday



From: Wayne Fisher
Sent: Thursday, November 11, 2010 11:25 AM
To: brendaf@bikeboneyard.com
Subject: tank

Received the tank today, looks good to me, Thanks so much! Teresa


From: Brenda Dean
Sent: Thursday, November 11, 2010 8:09 AM
To: brendaf@bikeboneyard.com
Subject: 86 honda rear end unit

Hi Brenda,
Just to let you know we got the rear end unit yesterday and my husband put it in and it works great. Wanted to Thank You for everything. Brenda


From: Matthew Golden
Sent: Monday, November 08, 2010 5:44 PM
To: brendanf@bikeboneyard.com
Subject: Fwd: ignition stator for a 1977-79 it 175

Begin forwarded message:please e-mail pay pal invoice for the yamaha it stator.---- i still ride the 79 can am 250 qualifier i bought off you about 2 years ago.this has become my favorite bike out of the 31 bikes that i have.i am starting to collect can am qualifiers,thanks ,matt


From: Will Clack
Sent: Wednesday, November 03, 2010 1:28 PM
To: brenda from bikeboneyard
Subject: Re: shipping complete bikes

Brenda,
The cr 480 forks and triples arrived today in the UK,thanks for value on the ticket,the customs didnt slap any imprt duty on them. They certainly are in good condition,great service,thanks again.
regards

Will Clack


From: Stephen Smith
Sent: Wednesday, November 03, 2010 11:31 AM
To: brendaf@bikeboneyard.com
Subject: 84 honda vf 500 carbs

I have bought alot from yall before and all is good . Now I need a carb set (4) for my 84 honda vf 500. your site has them listed for $75 a set


From: taha mohiuddin
Sent: Thursday, October 28, 2010 4:45 PM
To: brendaf@bikeboneyard.com
Subject: 77ts185

Hi i recently bought a swingarm and frame from you for the 77 ts 185 and it was amazing. i am now looking for some more parts. the tank, ign switch, wireharness, cdi box, fenders, headlight assembly, and the exhaust pipe. i am also missing the battery box and the oil tank and its mount if you have that. if you dont then i will just take the above. thx for everything.


-----Original Message-----
From: Darren Gallant
Sent: Thursday, October 14, 2010 9:47 PM
To: brendaf@bikeboneyard.com
Subject: Re: RE: RE: RE: RE: Shipment Notice: A package has been shipped to you

Hi brenda i got parts today look good im very pleased not your fault it took so long dam customs i will leave you good coments on your website soon as i get my computer fixed also my co worker is lookin for the control on bars with starter switch for 84 vf1000f interseptor honda .also i have few other bikes im building so i will b contacting you for parts for them soon thanks have a great day

From: Matthew Morris
Sent: Tuesday, October 05, 2010 10:28 PM
To: brendaf@bikeboneyard.com
Subject: RE: Honda CB500/550 Exahust Mounts

Hi, The brackets for the CB500 arrived here the other day and they look great. Thanks So much for you efforts and I will remember you guys in the future.

Thanks Much!!!
-Matt


-----Original Message-----
From: mountainexcavating
Sent: Tuesday, October 05, 2010 8:37 AM
To: brendaf@bikeboneyard.com
Subject: RE: parts for 1989 kx 500

Thank you very much i recieved the part yesterday! Your customer service is excellent, i will definately continuue to do business with you as well as spred the word about your site! Thanks again. -Rob


From: Peter Hansen
Sent: Wednesday, September 29, 2010 1:19 PM
To: brenda at bikeboneyard
Subject: RE: pipe for 1974 Kawasaki H2B

I received the pipe in good condition, thanks again. It fits perfectly and is in good shape.
I don't suppose you've since acquired the other two pipes, have you??

Peter Hansen



From: Jeff, Deana, and Emma
Sent: Friday, September 24, 2010 9:22 PM
To: brenda at bikeboneyard
Subject: RE: honda xl350
Hi Brenda. I just received the kickstart lever and am very happy with my purchase! I may need a few more parts off that 78 of yours, but I will let you know when I get more into it. Thanks again.
Jeff


-----Original Message-----
From: mark anderson
Sent: Monday, September 20, 2010 6:19 PM
To: brendaf@bikeboneyard.com
Subject: Yamaha TW 200


Hi, saw the TW on your website. I visit your site at least weekly. I watched
the YouTube video on the bike also. Seems to be pretty solid. Had a couple of questions for you. Do you have a clear title for it? Also, it appears that the front wheel is gold and the back one is silver. Has it been wrecked? Curious about what is going on with that. Also, I was wondering if you ever do any horse trading? I have a 76 YZ 125. Running, but a bit rough. It's all there, tank is ok, side panels and front number plate are in place, but the seat is torn up pretty badly. You know what the parts alone are worth on that one. I also have a complete 1971 Honda CT70. It's in good shape, but I haven't tried to get it running. I can get you pictures of these if you are interested at all. Let me know what you think.
Thanks for running a great site and a great service!


Mark E. Anderson


From: Brian Ruffin
Sent: Sunday, September 19, 2010 6:18 PM
To: brendaf@bikeboneyard.com
Subject: Japanese Makes 1970-1979

Hi,
Could you please notify me when you get any '70s model Honda CB, Suzuki GS, or Yamaha XS in stock (550cc-750cc)? Also, could I have a ballpark figure of how much it would cost to ship a bike of this size to Birmingham, AL, ? You have excellent prices on what you have to offer by-the-way; what a wonderful company ;)

Thanks,
Brian


-----Original Message-----
From: wvine
Sent: Sunday, September 19, 2010 4:41 PM
To: brendaf@bikeboneyard.com
Subject:

Hi Brenda! Need a gear shift lever for a SL350K1 or K2. can you help me out. I would prefer that it is reasonably straight!Loved the kickstand that you sent me. Wes


From: Dave Trainer Sent: Sunday, September 12, 2010 10:59 PM To: brenda at bikeboneyard Subject: RE: Yamaha tank Thank you Brenda, for being so fast .looks like I can plan on takin the Yamaha tha nks to your speedy service. ill tell my son and friends who have older bikes about the Boneyard. Till next time Dave --- On Sun, 9/12/10, brenda at bikeboneyard wrote:


From: Jeff Morris
Sent: Monday, August 30, 2010 2:01 PM
To: brenda at bikeboneyard
Subject: Re: XS1100 SF Coil

Thanks Brenda ! Coil works Great ! I will do business in the future ...................
Jeff


From: Mark Gudmundson
Sent: Thursday, August 26, 2010 3:14 PM
To: brenda from bikeboneyard
Subject: Re: Kawasaki H1 500 carbs for sale ?

Picked up my bowls yesterday, they cleaned up fine. Thanks for the quick service Brenda!


From: jon
Sent: Monday, August 23, 2010 6:51 PM
To: brenda at bikeboneyard
Subject: RE: tracking info

i thank you a million so many times over. seen your youtube vid you are a cool seeming chick. and and easy on the eyes too.lol


From: Timothy & Danielle Hugar
Sent: Sunday, August 22, 2010 7:18 AM
To: brendaf@bikeboneyard.com
Subject: 83 yamaha 600 tt

Hi, I have a 83 yamaha 600 tt, I got the carburetor from you and it works great. I was wondering if you would know where I could get the piece of metal on the frame that the kick stand would attach to. I have the kickstand but it looks like the previous owner snapped it off somehow. I don't want to replace the whole frame. Thanks Tim Hugar


From: michael Dapice
Sent: Thursday, August 19, 2010 10:28 AM
To: brendaf@bikeboneyard.com

Subject: Fw: HELLO BRENDA...............
Damn i Love that Video You got on your site.....Good God! Have a Great Day..........


From: jon
Sent: Tuesday, August 17, 2010 10:08 PM
To: brenda at bikeboneyard
Subject: RE: rv 90

mind my french but brenda your the cats ass! that's a very good thing!
ok i can't drive out there and back for what you can send it for so i'll need you email info for paypal or is it on your site? i will prolly send the paypal friday. no rush on getting it here as long as it's before summers out.lol anyway after i pay you can send the paperwork in a envelope or something. the title means the world to me so i can get this thing plated and haul my fat ass around! 330lbs and lovin it. pretty sad i have a 2007 street glide and these things that were made before my time on earth even got here flip my switches like crazy. i just picked up a m t d mini bike from the late 60's early 70's kinda rare it seems.
thanks again lady hope to hear from you soon. jon


From: DispCDC
Sent: Thursday, August 12, 2010 10:40 PM
To: brendaf@bikeboneyard.com
Subject: (no subject)

Love the sight.


From: Timothy Johnson
Sent: Wednesday, August 11, 2010 4:58 PM
To: Brenda AF
Subject: 82 Honda GL500

Brenda....you sold me the tank from this bike last month....worked out great....thanks. If you have handlebars, crash bars, exhaust headers, or the seat for this bike please send me a picture. I may make another purchase.

Thanks

Tim


-----Original Message-----
From: mattinaus
Sent: Wednesday, August 11, 2010 6:30 PM
To: brendaf@bikeboneyard.com
Subject: RE:RE: MSN-Request: 1986 Yamaha tt600

Hi Brenda, thanks very much for the cover, i am very happy, i will buy from you again,
have you a list of other parts for tt 600 or if you get hold of rear fender let me know, the postage was very fast to Australia i cant thank you enough

Regards

Matt in Aus


From: Robin Padilla
Sent: Wednesday, August 11, 2010 3:44 PM
To: brenda at bikeboneyard
Subject: Re: 1984 ZX900 Ninja

I just got the shifter in the mail. Thank you very much! :)


From: shopsmith
Sent: Tuesday, August 10, 2010 8:36 PM
To: brendaf@bikeboneyard.com
Subject: RE: Notification of payment received

Got the cover...looks great thx

U still got the water pump...how does is look..any signs of leaking from the little hole in the bottom?

How much did ya want for it again


From: Terry Rogers
Sent: Tuesday, August 10, 2010 7:06 AM
To: brenda at bikeboneyard
Subject: Re:

hey brenda ,recieved part, thank you very much. hope to do buisness with you in the future. terry


-----Original Message-----
From: Derek Burkhalter
Sent: Monday, August 09, 2010 8:18 PM
To: brenda at
Subject: 1987 Honda TRX250X

Hey guys the tank was awesome. I was wondering if you would take 100 dollars for the head on the bike.


From: jwyantsr
Sent: Saturday, August 07, 2010 9:38 PM
To: brenda at bikeboneyard
Subject: Honda Foreman head trx 350d

Brenda,
The head you sent me worked fine, I just need to build everything under it to make it run now. This is kinda a project with my son and I to do this atv restore. Thanks a million will probably order again soon.............Thank You...John A. Wyant sr...........


From: marion
Sent: Saturday, August 07, 2010 12:35 PM
To: brenda from bikeboneyard
Subject:

Tail light arrived this morn- every thing just fine. Thank you. The ke250 Kawa is in surgery right now having an engine gasket replaced. Its future looks good. Bultaco Alpina will probably be next. Again, thanks. I' ll be back. Marion Smith.


-----Original Message-----
From: Hay To The Den
Sent: Wednesday, August 04, 2010 3:40 PM
To: brendaf@bikeboneyard.com
Subject: 1985 cr80 rear wheel

I just received the rear wheel, it is much nicer than I had expected. I thank you for
leaving the tire on and sending an axle and brake backing plate as well, I was not epecting that. I will be purchasing parts through you in the future, thank you! Hayden.



From: Jon Swarts
Sent: Thursday, July 29, 2010 5:57 PM
To: brendaf@bikeboneyard.com
Subject: Parts Recieved

Ms. Brenda,

Today I received the parts I ordered from you, good stuff! I'll most likely need a few more odds and ends for the projects final shorting out. When I get to that point I'll let you know what I need. Thanks much. Back to the garage, hope all goes well.

End transmission,

J. Swarts


From: Myles Lawrence
Sent: Sunday, July 25, 2010 4:00 PM
To: brendaf@bikeboneyard.com
Subject: couple of things

Brenda,
I now the following things. Do you think you may have them?

1. A set of the round chrome ribs that fit on the bottom of the CB750 fork ears and hold up the fork boots? 2. K0-K1 seat in any condition 3. K0-k1 tail light assembly 4. Side covers from any year CB750 5. handlebars from early 750 or cb450

Thanks for looking.
The head you sent me was PERFECT!!!


From: Christian Otero
Sent: Monday, July 26, 2010 2:30 PM
To: brendaf@bikeboneyard.com
Subject: More YZ parts questions!

Hi Brenda -

Thank you for my recent parts order. All items were just what I needed and in great condition.

By chance is the '78 YZ125 airbox still available? I need a complete airbox that includes: 1) The main housing that bolts to the frame 2) Filter cage 3) Filter cover/retainer that attaches to the main housing

Also, I'm trying to find a Preston Petty Mudder (also called the IB, not the wide Tony D. verson) for another project of mine... in silver, of all colors. Have one available?

Let me know what'cha have!

Thank you and best regards -
Christian


From: David Caceres
Sent: Wednesday, July 21, 2010 7:49 AM
To: brenda at bikeboneyard
Subject: RE: 95 ex-250
Got it, I will send you a USPS money order if that is not a problem with you. I see myself doing more business with you in the near future. been at it for about 2 months and no one answers my emails or are just plain stupid or even rude, you guys seem to be on top of your game and are quite courteous. I will buy the MO tomorrow and send it the same day, again thanks a lot for the help and the service.

sincerely.

David.


From: Weldon, Jeffrey A.
Sent: Wednesday, July 21, 2010 2:36 PM
To: 'brendaf@bikeboneyard.com'
Subject:

Hi Brenda,

Jeff Weldon here ….still enjoying my 1971 Purple Yamaha 90……Hey I was wondering if
you currently have any running Hodakas available….I know you have had some nice examples in the past….many thanks!


Jeff


From: Bob Berth
Sent: Monday, July 19, 2010 3:47 PM
To: brenda at bikeboneyard
Subject: RE: 1978 Yamaha dt125
Thanks Brenda, the speedo arrived today..YOU'RE THE GREATEST !! Bob.


From: sandy and todd tumbleston
Sent: Sunday, July 18, 2010 9:40 AM
To: brenda at bikeboneyard
Subject: Brenda, I need carbs

Hi again brenda! Thanks for the parts for the Honda Elsinore.. I now have two
atvs that i need carbs for. One is a 98 Suzuki LT-F4wd and the other is a 99 yamaha beartracker YFM250. Don't ask what happened to the old carbs.... I wish I knew! Anyway, can you cross reference the other atv's you have and see if you have them...
THanks Todd Tumbleston


From: Tim Fiato
Sent: Thursday, July 15, 2010 5:20 AM
To: brendaf@bikeboneyard.com
Subject: RT-2 FRAME AND SWINGARM

Hi Folks:

In June, you shipped a frame and swingarm to me. I am writing to say thank you for .cleaning it. looks great!
Also, the frame had the rear brake stabilizer attached. I did no think of that until I actually looked at the frame last weekend. Thank you for including it.

I have just begun to put this project bike together. So, I am sure I will be contacting you for more items.
Tthanks again,
Tim Fiato


From: WILLIAM ARNOLD
Sent: Wednesday, July 14, 2010 10:15 AM
To: brendaf@bikeboneyard.com
Subject: RE:

Thanks Brenda, and again I appreciate all your help very much. You have been a big help.

Thanks Adam from ABQ


From: billyneu
Sent: Tuesday, July 13, 2010 4:03 PM
To: brenda at bikeboneyard
Subject: REALLY NICE BIKE THANKS!

EXCELLENT ASCOT...
waay better than described.
Thanks for holding it...beingbthere on a sunday night.
LOVE THOSE OLD HONDA 500's.
Am gonna post a Thank You on CL.



From: Connor Lyons
Sent: Tuesday, July 13, 2010 6:48 AM
To: brendaf@bikeboneyard.com

Subject: 83 yamaha XJ 750 R secca right battery cover panel

Hey!

I heard about your website through a local bike shop, i like the site

I was wondering if you could help me locate a panel that goes over the battery terminal
on the right side of the bike. i have one on the left side, but not on the right. i am
also looking for a new seat for the bike, but that isnt as important as the panel.
would any other yamaha model's battery panel cover fit this bike? or perhaps you
could point me in the right direction of where i could find parts for my bike.

thank you VERY much for your time and patience in reading my e-mail

best regards,
Connor from Connecticut


From: Bill Banks
Sent: Tuesday, July 13, 2010 5:18 AM
To: brenda at bikeboneyard
Subject: Fwd: Bike pictures!

My son and I got the bike to run! Here are some pictures of me riding. Thanks for so much on selling me the parts! You might see I have no front lights going. I'm working on that too. Just wanted you to see it going! It's been from 1979 till now not running!
Thanks again
bill


From: Lute Armstrong
Sent: Thursday, July 01, 2010 6:45 PM
To: brendaf@bikeboneyard.com
Subject: Clutch Plate

Brenda,

I received the cover today and thank you for getting it out to me. It was okay and I can now get my bike together. Thanks again for your help.


Lute Armstrong


From: Romano, Tom
Sent: Monday, June 28, 2010 10:54 AM
To: brenda at bikeboneyard
Subject: Rear Shock for 1986 IT 200

Dearest Brenda…

My project bike is coming along just like you would expect a project bike to. Surprise after surprise… The latest surprise is the rear shock. IT appears that there’s parts inside the shock body that usually is moveable (to get it out, you press down, pull a c-clip and then it comes out) but it’s solidly locked in there.

So, do you have a rear shock for an 1986 IT 200? Thanks for checking!

And the good news is, the Cylinder/Piston you sent by the way was AWESOME! A simple hone and a fresh stock piston is all the motor needs to be purring.

Thanks again!

TR


From: Scott McKay
Sent: Saturday, June 26, 2010 10:47 AM
To: brenda at bikeboneyard
Subject: M-99 ALPINA

Hi Brenda,just wanted to let you know that I got the Alpina frame a few days ago and it looks great! Thanks for the fast service!!! Scott


From: laura48
Sent: Tuesday, June 22, 2010 10:42 AM
To: brenda at bikeboneyard
Subject: RE: 87 honda cr500 front disc., ktm300 rear shock


Got 'em! Thanks and looking forward to doing business with you again.
Laura


From: Bruce Wold
Sent: Monday, June 21, 2010 8:49 AM
To: brendaf@bikeboneyard.com
Subject: RE: Motorcycle Part

HELLO BRENDA!
Thank you so much for your help. The part was exactly
as described and worked out great. Great customer
service:


Bruce


-----Original Message-----
From: wvine
Sent: Friday, June 18, 2010 9:21 AM
To: brendaf@bikeboneyard.com
Subject: SL350K1 stand

Got the sidestand today.Way,WAY nicer than I expected!And the spring came along with! AWESOME!! Thanks Brenda!


From: Anthony DeCesare
Sent: Thursday, June 17, 2010 3:00 PM
To: brenda at bikeboneyard
Subject: Re: honda cb200

Hi Brenda,
Got the CB200 carbs today--thanks! They are even better than I hoped.
Hope to be back in touch soon about the headlight bucket.

Tony


From: chorton
Sent: Monday, June 14, 2010 12:10 PM
To: brenda at bikeboneyardv
Subject: RE: DR 250 CDI Boxv
Thank you the refund has been processed.

Not sure if you care but I ended up biting the bullet and purchased a new CDI $285 OUCH but the bike started on the second kick and runs good.

Very satisfied with your service will send people your way

Thanks


Chad Horton

From: Kevin Pierson
Sent: Friday, June 11, 2010 7:26 AM
To: brendaf@bikeboneyard.com
Subject: 1986 trx fourwheeler

brenda i am looken for transmission or lower end for honda 125trx 1986. Do you still have this lower end for $150.00 i will send check today. thankyou kevin pierson. { you guys have the best bone yard i've ever seen. k.p.} i tell everyone.


From: DENNIS OLEARY
Sent: Friday, June 04, 2010 7:10 PM
To: brenda at bikeboneyard
Subject: RE: 78 yamaha dt400 tank

Tank arrived today as advertised,Thank You


From: Andrew Blaine
Sent: Friday, June 04, 2010 8:07 AM
To: brendanf@bikeboneyard.com
Subject: 1983 Suzuki GS650GL

Hi there,
You came highly recommended from Jamie Beers . I purchased the bike in the subject line from him and he said that you have been very helpful for him in the past. I was wondering if you had an exhaust, in good shape, for this bike? Thanks!

Andrew Blaine


From: Mark and Christine Riccardi
Sent: Friday, May 28, 2010 3:34 PM
To: 'brenda at bikeboneyard'
Subject: RE: 1978 yamaha dt 125

Hi brenda rack arrive today fits like a glove. Thank you so much . I looked long and far and you were the only place that had it. Great condition fast shipping I’ll be back. I saw one other 78 dt 125 with the same rack .it had a seat extension on it. Ever see anything like that? I see it has 4 small screw holes that look like they may accommodate something. If there is any accessories that fit that rack I’d be be interested. I need to strap tools on back . thanks again


From: Chad Ballman
Sent: Thursday, May 27, 2010 4:12 PM
To: brenda at bikeboneyard
Subject: Re: 63 honda ca-95 dream 150 - $750 (florence)

Brenda, I want to thank you for the great bike. I rode it around a little last night and fell in love. Please keep me in mind when you want to get rid of other cool stuff! Chad


From: Zellner, Adam W
Sent: Thursday, May 27, 2010 9:41 AM
To: brenda at bikeboneyard
Subject: RE: MX400 exhaust

Thank you Brenda you are awesome!!!!!!

Adam Zellner


From: Ron Phillips
Sent: Saturday, May 08, 2010 2:51 PM
To: brendaf@bikeboneyard.com
Subject: RE: honda cb400

Hello Brenda...Thank you for the quick shipment of the CB400 wiring harness...I was hoping you also had a right hand handlebar kill switch wiring assembly that has the flat red eight pin male end on it...It is for a Honda cb400...I think probably a 78 thru 80 would work...Heck I don`t know...Just let me know please..I will be paying thru
paypal..Thanks again...Ron


From: Chris Hayes
Sent: Tuesday, May 04, 2010 4:54 PM
To: brendaf@bikeboneyard.com
Subject: RE: Ninja 250r parts ?

And I got them this afternoon.
Thank you very much, they fit perfectly !!



From: Albert Fesmire
Sent: Thursday, April 29, 2010 6:06 PM
To: brenda at bikeboneyard
Subject: Re: kawasaki gpz550 right exhaust

Brenda:

The GPZ pipe just arrived today....looks great... THANK YOU!!!!!!!!!
Ross Albert Fesmire


From: julie dick
Sent: Sunday, April 25, 2010 8:08 PM
To: brendaf@bikeboneyard.com
Subject: kx 125

I need a bottom end for a 89 KX 125. I have purchased from you in the past and have recieved awesome service, I hope you can help me. Travis


From: Mike Mastin
Sent: Saturday, April 24, 2010 1:13 AM
To: 'brenda at bikeboneyard'
Subject: RE: Kawasaki kz440

Brenda,

Gas tank, side covers and pipes arrived and are just as described. Thanks for a great transaction!

Mike Mastin


From: thomas cross
Sent: Friday, April 23, 2010 9:06 PM
To: brenda at bikeboneyard
Subject: Re: yamaha yl1

Got it today. Thanks again!


From: jim oglesby
Sent: Wednesday, April 21, 2010 4:58 PM
To: bikeboneyard
Subject: tank

recieved tank today! thank you ,thank you,!!!! Clean and it fits perfect. I'll have her on the road next week.paint can wait for a minute.Thank You!

JIM


From: trials mm
Sent: Tuesday, April 20, 2010 6:37 AM
To: bike boneyard
Subject: RE: honda sl175 forks

The forks were delivered yesterday. In great condition, thanks.
Mick


From: sendmail@paypal.com [mailto:sendmail@paypal.com] On Behalf Of
Sent: Wednesday, April 07, 2010 3:40 PM
To: bikeboneyard
Subject: You've got money!



Received the 750 Kawasaki exhaust yesterday. Thanks for the quick shipment.

George Terrill



From: Steven J. Rice
Sent: Thursday, April 15, 2010 7:54 PM
To: brendaf@bikeboneyard.com
Subject: 1981 GL 1100

Hey,
I ordered a rear caliper and gear shifter from you guys (Very happy). However, I need some more parts. I would like to price a gas tank for the GL1100 (Not faux tank I need the actual gas tank that fits under the seat). Also I need the throttle and both right and left handlebar switches ( Run switch/start button – Headlight switch and blinker switch ect..) Finally, I need the actual bracket for the Rear brake caliper. It looks like a Y bracket that the brake attaches to. If you could can you see if you have these items and then give me a list with the prices. Thanks so much.


From: justin craig
Sent: Tuesday, April 13, 2010 6:42 PM
To: brenda at bikeboneyard
Subject: Checks in the mail for master cylinder

Brenda you're awesome!! I will send you a check through the mail at the address below. I get paid tomorrow and I'll mail $60.00 tomorrow. Thanks a bunch.


From: Brockman, Mark
Sent: Tuesday, April 13, 2010 2:33 PM
To: brenda at bikeboneyard
Subject: RE: 1978 Honda XL 125

Hi Brenda,

I received your parts today and they look great. Thank you for your help.
I would also like to know if you have the handlebar controls (both sides). I would need basically everything on the bars, throttle, throttle cable, switches, levers, etc. if it was easier for you, you could send me the handlebars with everything still on them.

Let me know,
Thanks,
Mark


From: Krennen Stanley
Sent: Sunday, April 11, 2010 7:15 PM
To: brendaf@bikeboneyard.com
Subject: '96 KX125 Swingarm

Brenda,
Well my friends were so impressed with your parts list that I got you some more business, could you give me a shipping quote on the swingarm for the '96 KX125?

Thanks again,
Krennen


From: rdboggie
Sent: Friday, April 09, 2010 7:54 AM
To: brenda at bikeboneyard
Subject: Re: Shipment Notice: A package has been shipped to you

Package arrived. As always, just what I needed. Thanks.

From: Krennen Stanley
Sent: Thursday, April 08, 2010 10:33 PM
To: brenda at bikeboneyard
Subject: Re: YZ fuel tank

Brenda,

The tank arrived today and looks good, thanks for your help! I hope we will be doing business again in the future

Krennen


From: LHeath6664
Sent: Wednesday, April 07, 2010 3:47 PM
To: brendaf@bikeboneyard.com
Subject: Re: harley sx175

Received parts today!!Thanks so much


From: garyellison2025
Sent: Tuesday, April 06, 2010 5:49 AM
To: brendaf@bikeboneyard.com
Subject: Re:

Thank you very much. You have just made my day! I've been searching all over for that panel. Thanks again, Gary


From: zak wall
Sent: Tuesday, March 30, 2010 7:51 AM
To: brendaf@bikeboneyard.com
Subject: 78 Yamaha dt175 monoshock

Hey there,

My name is Zak Wall, I've heard a lot of good things about your business. I am looking for a rear monoshock for my 1978 Yamaha dt175. You wouldn't happen to have one lying around would you? I see you have an 80/81 dt175 for parting out and it wouldn't surprise me if the shock on that year matches my 78.

Also (assuming the part is available), I live in Missoula so I could come pick it

I have other things on my list that I might as well purchase now, too. Such as a
speedometer, tail light, and rear fender.

Thanks for your time,
Zak


From: Bryan Miller
Sent: Tuesday, March 30, 2010 1:56 AM
To: brendaf@bikeboneyard.com
Subject: 86 kx250

hey, i bought some parts from you a couple weeks ago your service was fast. So i'm
looking to possibly buy again.
on the 86 kx 250 for 500.00 what would the shipping be to ct. & how would you ship. If i remember right you were in NJ. right maybe, i could pick it up myself. Bring some x-tra $ with me in case you have something else i might like,thats for sale.If you rather just call me instead of all this e-mail i'm ready now. thanks for your time Bryan Miller

P.S. I think your compound is cool as hell !!!!!!!!!


From: mark harris
Sent: Sunday, March 28, 2010 6:35 PM
To: brendaf@bikeboneyard.com
Subject: 1971 hodaka ace 100b

Do you have a piston kit for a 1971 hodaka ace 100b .010 first over .The rear sproket I got from you worked out good. Let me know a.s.a.p.if you have it send me a paypal invoice and i will pay you when i get invoice Thank's Mark Harris I also need a tail light for same bike


From: Vigil, Marty F., DPS
Sent: Thursday, March 25, 2010 8:13 AM
To: brendaf@bikeboneyard.com
Subject: parts for cr 125

Hi boneyard thanks for the nice parts. Some other parts needed – Do you have exaust parts center pipe that goes between silencer and expantion chamber ,front number plate , frame rubbers under fuel tank ,does lower end come with shift lever and kick starter Thanks Marty


From: Terence E. McEnally
Sent: Friday, March 19, 2010 12:56 PM
To: brendaf@bikeboneyard.com
Subject: Hello

Brenda:
Love what you do!
Cats, bikes, kids, the West.
Trade ya' careers.

Find me a complete RD 350 and RD 400 engine?


From: rac
Sent: Thursday, March 18, 2010 5:30 PM
To: brenda at bikeboneyard
Subject: RE: 80 kawasaki kdx250

my kdx is running !!!!!!! thanks a million you guys are great .it was the cdi box. i still need a couple things but at least it runs again.
thanks,Bob


From: Gary Thomas
Sent: Wednesday, March 17, 2010 9:54 AM
To: brendaf@bikeboneyard.com
Subject: RE: 82 YAMAHA XJ650 FRONT RIM


brenda, received wheel and gauges today, most excellent
________________________________________


From: Bob Willis
Sent: Saturday, March 13, 2010 10:34 AM
To: brendaf@bikeboneyard.com
Subject: 1971 cb 175

Hello Brenda, have gotten parts from you before AND I THANK YOU. I am looking for a rear mud flap for the 1971 CB 175 I am restoring. I have the two brackets but not the rubber flap part. These we common on years from like 1968 to 1973 CB and others. Can you help? Thanks Bob in Ct I COULD ALSO TAKE A PIC IF NEED BE!!


From: Chris Campos
Sent: Tuesday, March 09, 2010 11:05 AM
To: brendaf@bikeboneyard.com
Subject: RE: 72 RV 90


ok I just sent you the money money order in the mail today. just be sure to send the title to0. Thank you very much I've done business with you before and you guys are great.


From: Srikanth Palla
Sent: Friday, March 05, 2010 11:24 AM
To: bikeboneyard Subject: Re: 72 CB750 K

Hi Brenda,

I was looking for a pair for Head Light years for CB750 K2 model and I came across your listing for 72 CB-750 here http://bikeboneyard.com/72%20honda%20cb-750.html

Do you still have them? If so can please mail me some pictures of them (Outside
condition and Inside the head light ears also)? Last year I have bought some parts for my 72 CB750 from you and I am more than pleased with the condition of them.

Thank You,
Sri.


From: Steve Sluder
Sent: Tuesday, March 02, 2010 3:03 PM
To: brendaf@bikeboneyard.com

Subject: motorcycle parts

Hi, I've bought parts from you in the past. I'm very happy with your service. I need some parts for a 1981 sr 250 Exciter. I noticed you have a 1980 model your parting out. Could you please tell me if you still have any of these parts available & the price. The exhaust, the instrument panel, the right side cover ( the one that covers the battery ), the battery box, the rear view mirrors, the front fender, the gas tank/or gas cap with key/or tank emblems, I have just the side kick stand, I need the double kick stand, the seat, The back wheel, the bar switches. Thats all I can think of for my wish list. Some are more important than others. If you get the time to check on these parts for me it would be greatly appreciated. Thanks Steve.


From: p. lampman
Sent: Monday, February 22, 2010 4:36 PM
To: brenda at bikeboneyard
Subject: RE: cb450 parts

Brenda, the bracket worked fine, the caliper rebuilt fine, very pleased, i'll send back what i don't need. while i have you, do you have any upswept megaphone or other mufflers that would work on my cb450? thanks, pat


From: Vigil, Marty F., DPS
Sent: Friday, February 12, 2010 8:49 AM
To: brendaf@bikeboneyard.com
Subject: Thanks for order

Hi bone yard Thanks for the wheels nice parts . how much for the c.d.i. coil rear brake cable , rear brake torque arm ,also let me know if you have the swing arm bolt and the rh radiator has a brace do you have that brace little black bar that goes from frame to radiator Thanks Marty


From: G?????? ?aµe?????
Sent: Monday, January 25, 2010 2:45 AM
To: brendaf@bikeboneyard.com
Subject: KAWASAKI H1 F

Thanks Brenda, I have received the items, your service was excellent, even though there was a misunderstanding at the beginning. The speedo is almost like a new one. Have you front light, or flash for this Kawa? John Kamenakis


From: Scott McKay
Sent: Wednesday, February 10, 2010 7:46 PM
To: brenda at bikeboneyard
Subject: OSSA frame

Hello,I got the frame today and it looks good.Thank you for including the swing arm!! I will be in touch for more parts as soon as I have some more mad money.Thanks for the excellent service!!! Scott.


From: Shannon
Sent: Monday, February 08, 2010 7:40 PM
To: brenda at bikeboneyard
Subject: Thanks

Got my kickstart lever. It went on real smooth without a hitch. I had this welded up socket wrench thingy goin on before. Long story short it was a temporary setup! Used to take forever to start and usually banged up my ankles and brake rod. Now, 3-4 kicks in 30 degree temp and we're off and running. Totally suprised to see it in a package/ new. ( and BEEFY metal) I thought it was used since you are a salvage. That doesn't really mean anything anyway, I work for a auto salvage yard and we sell new stuff too. But, it is so so nice to see that there are people like you out there that really care for thier customers. So many businesses now days are all about themselves they forget who takes care of them as well. Anyway, you all hit the nail on the head with me, thankyou and hope to do more biz in the future.

Shannon



From: Don Pierce
Sent: Monday, February 08, 2010 9:34 AM
To: brenda at bikeboneyard
Subject: Rear Brake Cylinder 78 KZ1000 A2

Hi Brenda

Do you by any chance have a rear brake cylinder for a 78 KZ1000 A2 One of the pistons was corroded in mine. All I really need is the piston if that's all you have available.

Thanks for the fast service on the right side electronic control switches.
/b> Thanks

Don Turner


From: kirk conway
Sent: Saturday, February 06, 2010 3:34 PM
To: brenda at bikeboneyard
Cc: Kirk Conway
Subject: Thank you's to Brenda,

Hi Brenda, its kirk, i sure appreciate you getting back to me on parts and things, they are always in good shape, I like,your picture there on the trail, you look soo nice,
Id like to have you on the back of my bike anytime, lots of thank you's bren, Kirk,


From: paul conley
Sent: Tuesday, February 02, 2010 6:59 PM
To: brenda at bikeboneyard
Subject: Re:

just recieved front forks ,beautiful very nice. wondering if front wheel is straight and if axle is availible? please let me know,interested in buying.


From: Mike Fol
Sent: Thursday, January 28, 2010 10:24 AM
To: brenda at bikeboneyard


Subject: RE: honda cb500 left side panel

Thank You B,Its been a pleasure dealing with you! I'll be back!You Rock! Mike


From: Ben Jones
Sent: Friday, January 22, 2010 8:27 AM
To: brenda at bikeboneyard
Subject: Re: honda trx250 x tank

tank looks great, thank you,
Ben Jones


From: rdboggie
Sent: Friday, January 22, 2010 5:41 AM
To: brenda at bikeboneyard
Subject: Re: More parts for 1973 LT2



Brenda...I'm impressed by your integrity. Thanks.


From: Marshal Cates
Sent: Wednesday, January 20, 2010 7:45 PM
To: Brenda Bike Bone Yard
Subject: 1979 Honda CR250

Brenda - I was wondering if you had any luck finding a set of head bolt studs for my '79 Honda CR250? The triple tree and exhaust manifold were in great shape - Thanks. Also, I was wondering if you had a gas tank for my bike that had NO dents init? If so - how much would you want for it? Talk to you soon.
Marshal Cates


-----Original Message-----
From: Christopher
Sent: Wednesday, January 20, 2010 6:26 PM
To: brenda at bikeboneyard
Subject: Re: Forks
Thank's I look forward to doing more business with you.

Chris


-----Original Message-----
From: Thomas Schwartz
Sent: Tuesday, January 19, 2010 8:30 PM
To: brendaf@bikeboneyard.com
Subject: Xs650 & cb450 parts

Hi Brenda, I bought some parts from you a while back, and was very satisfied, so I thought I would try you again.
I'm restoring two bikes at the moment and I'm looking for parts.
early xs650 parts 1970-1972.
I'm also looking for cb and cl450 parts from 1968-1969. I need tanks, front ends, and mufflers and pipes to start with, among other parts. condition of parts is a major concern, and last time I bought from you I was very happy. Hoping you can come through again. if you could get back to me when you get a chance I would be grateful, Thanks so much - Tom S.


From: Trish Ashburn
From: Christopher Kleinman
Sent: Monday, January 18, 2010 5:57 PM
To: brendaf@bikeboneyard.com
Subject: 80/81 Yamaha dt175

How much for the throttle assembly and the fuel petcock?
Also, very satisfied with recent purchase.
Christopher


Sent: Monday, January 18, 2010 5:55 AM
To: brenda at bikeboneyard
Subject: Re: 1980 GS850

Hi Brenda

Could you send a picture or two of it? Thanks!

PS enjoyed looking at pictures on your website, it’s beautiful there in the mountains


From: VONDA LAHR
Sent: Saturday, January 16, 2010 7:30 PM
To: brenda at bikeboneyard
Subject: RE: orange tank hodaka dirt squirt

received parts in great shape..i was a little worried about getting a horribly dented exhaust pipe..everything arrived and to my surprise the parts are much better then expected..would highly recommend you to others..thanks for getting me a few steps closer to finally getting this old hodaka in the dirt again


From: Paul Fleming
Sent: Thursday, January 14, 2010 7:39 PM
To: bikebone yard
Subject: RE: Yamaha MX 175

Thanks,Im sure we will be doing more business. Im very happy with Yam 175
Paul


From: usariggs
Sent: Thursday, January 14, 2010 11:02 AM
To: brenda at bikeboneyard
Subject: Re: 87 yamaha tt225 left panel

Received part today. Thanks for getting it out so quickly. Good job.

Mr. Riggs


From: gunsnammo
Sent: Monday, January 11, 2010 11:52 PM
To: brendaf@bikeboneyard.com
Subject: Need help

hi, I'm looking for an '04 Suzuki ltz 250 rear end. I have done some business with you before and I was not disappointed. You got me the parts in a very short time and it was exactly what i wanted. I have been looking everywhere for this thing, and can't find one anywhere. Thank you for all your help, Brad.


From: peter gard Sent: Monday, January 11, 2010 5:41 AM
To: brendaf@bikeboneyard.com
Subject: kawasaki bits

hello boneyard ,pete here from london england..had a complete rear wheel from you last year for my 74 kawasaki h2 750 and it was brilliant , thank you very much for getting me on the road...just wondering if anything left of the transmission gearbox or crank ..all the best peter.


From: Knipes, Bradford
Sent: Sunday, January 10, 2010 10:11 AM
To: 'brendaf@bikeboneyard.com'
Subject: stiletto top end

Dear Brenda,

Enjoyed meeting you on youtube video...helpful and charming too! In an email, you said Stiletto bottom end was gone, but you had top end. I’m interested in that.

You list:

head--$50
cylinder with piston--$150
Are they in good shape? Do you have carb or exhaust?

Thanks for info.

Brad


-----Original Message-----
From: Douglas Varey
Sent: Saturday, January 09, 2010 11:36 PM
To: brenda at bikeboneyard
Subject: Re: Bridgestone 100

Brenda,

What do you have for 17" wheels? Passport, CT90, etc.. Yamaha, Suzuki,
etc.. OK too.
Any 17" x 120 or 140 wheels, fronts preferred but rears ok as well.

The Bridgestone wheel I got from you was very nice, honestly better than these would need to be.
I would be interested in any quantity from one to a dozen. Some sort
of insanity has gripped myself and colleagues. We've been building tiny "vintage" cars. If you are curious what sort of home these wheels would be going to: http://web.mac.com/dgvarey 17" diameter is critical to proportions and "skinny" is best.

Let me know if you have anything. Thank you.

- Doug


From: Margarete Lory
Sent: Tuesday, January 05, 2010 5:22 PM
To: brenda at bikeboneyard
Subject: RE: honda sl175 front wheel

The package has arrived and I'm very happy with the product that was sent. Thank you for your service and professionalism. It was a pleasure to do business with you and I will most likely be back in touch!


From: kenton kelly
Sent: Wednesday, December 30, 2009 7:10 PM
To: brendaf@bikeboneyard.com
Subject: web site
Just Re-discovered your site and forgot how good it was.
I have an 82 IT465 that I am restoring and will keep tabs on your website from time to time when I am looking for something...although, that IT you have for sale would make this whole restoration idea go away, wouldn't it?
I am also interested in finding a Hercules or Penton ISDT bike, so I will keep checking for that as well...

thanks,
Kenton
Columbus Ohio


From: Big Mike
Sent: Monday, December 28, 2009 3:11 PM
To: brendaf@bikeboneyard.com
Subject: Good God......

Hello Brenda, Are you sure your not a Model??? Really......Are All the woman in Mont. as Beautiful as you??? Cause i'm about ready to leave the sunshine here in Deland,Fl for some ice cold winters!!!!! Is the '74 Yellow Yamaha GT 80 still for sale @ 400.00 ??? Ive lost my thought here thinking about your Video......Let me Know please....Mike


From: justin williams
Sent: Saturday, December 26, 2009 11:27 AM
To: brendaf@bikeboneyard.com
Subject: h1 and h2 parts

once again i want to thank you for the awsome deal and super fast shipping on the h1 frame and heads the parts are the best i bought in a long time also send me a list of any and all h1 and h2 parts you have and ill let you know what i need and ill buy right away thank you


From: Logistics Brisbane
Sent: Thursday, December 17, 2009 9:47 PM
To: brenda at bikeboneyard
Subject: JAWA IN CRATE

BRENDA
HAVE UNPACKED CRATE AND ASSEMBLED JAWA TODAY. ALL LOOKS AS I EXPECTED.
WIIL RESTORE OK . ENGINES OK WITH MATCHING CASES AND NO WELDING FROM BLOW UPS. WILL KEEP IN TOUCH. I AM RETIRING NEXT WEEK SO MY NEW EMAIL ADDRESS IS AS FOLLOWS


THANKS
JOHN CLEARY


From: Scott Earhart
Sent: Thursday, December 17, 2009 12:24 PM
To: brenda at bikeboneyard
Subject: Re: Earhart Order-Nashville

Brenda

Package arrived today. Thank you, everything looks good. I'm sure I'll be calling you in the future.


Let me know if you get in anything interesting in OSSA.


From: Jim Garvey
Sent: Monday, December 14, 2009 1:31 AM
To: brendaf@bikeboneyard.com
Subject: CAN AM TRIPPLE CLAMPS/OR OSSA TO SUIT 35MM BETOR FORKS
HI
Would you have a set of triple clamps to suit 35mm bettor forks. These triples are alloy and top and bottom look the same, Have 2 allan key bolts each side top and bottom and also holding steering stem Cheers Jim Sydney Australia Ps
The cz bottom end was perfect for my rebuild


From: ROBERT DEMOSS
Sent: Thursday, December 10, 2009 12:25 PM
To: brendaf@bikeboneyard.com
Subject: Hello

I have wrote you a couple times.....love your site and the bikes....I now check you guys every couple weeks!Im down here in st pete fla....and look for some different bikes for some decent deals.I write an antique bike article go to floridafullthrottle.com and click on Mr 300....all my articles are at the bottom.....oh I was writing to see if you still had that 1969 honda cb 160 neat lil bike thanks Bob ________________________________________


From: Shawn Mealey
Sent: Wednesday, December 09, 2009 10:27 AM
To: brendaf@bikeboneyard.com
Subject: RE: Payment received f

Hi Brenda,

I really appreciate that....thank you....it made my day to receive my package. Wishing you all the best and have a Merry Christmas.

Shawn
____________
____________________________
From: bikespark
Sent: Wednesday, December 02, 2009 1:23 PM
To: brendaf@bikeboneyard.com
Subject: XT 500 shocks

Hi Brenda, The shocks for my XT arrived today. Just a quick note to say thanks and if you’re ever on this side of “the pond”, give me a call.

Best regards,
Pat Sheridan
Ireland

BikeSpark
Classic Bike Restoration


From: Federico Marchán
Sent: Monday, November 30, 2009 5:24 PM
To: brendaf@bikeboneyard.com
Subject: RE: Yamaha XS650 Alternator Rotor

Brenda,

Thanks for your response about the alternator rotor for a 1979 yamaha XS650. Is it still available? Do you have the stator also? Do you have the voltage regulator and rectifier? Please let me know if you have these parts, how much they are and how long they will take to ship? Please give me a good price if I buy all the parts. I bought a xs750 tank from you already. Very happy with it. Please let me know as soon as you can. Thanks again.

Best regards,

Federico.


From: dshelly37
Sent: Sunday, November 29, 2009 8:10 AM
To: brendaf@bikeboneyard.com
Subject: RE: gas tank

That works for me. Send me an invoice for paypal

Thanks a lot.

P.S. The Black ' 78 Kz1000 I bought from You runs great.
Dave Shellenberger


-----Original Message-----
From: D&G Cocuzzo
Sent: Tuesday, November 24, 2009 4:07 AM
To: brendanf@bikeboneyard.com
Subject: Matchless G2CS project

Hi- I purchased the motor from you some time ago- (Thanks!)- Do you still have the other parts (forks wheels etc)? Thanks, in advance, Dave


From: Lorinda Niday
Sent: Monday, November 23, 2009 1:25 PM
To: brenda at bikeboneyard
Subject: Re: cr500 radiators

thanks Brenda, They just got here, and they look great! Pleasure doing business with you and will do more.
Best,
Jim


From: Linda McMullin, Dave Hunt
Sent: Sunday, November 22, 2009 11:05 AM
To: brendaf@bikeboneyard.com
Subject: BMW R100/7

Hey Bone Yard,
Dave Hunt here. I bought some parts for my 79 Kawasaki KLX250 from you last year and everything was GREAT. Thanks!

I just purchased a 1978 BMW R100/7 and am in the process of restoring it (mostly wiring – it had a small fire under the gas tank; choke & throttle cables, etc.). Might you have salvage/new parts for this 21,000 original-mile beauty? Right now I’m looking for a complete wiring harness (as many parts as possible), choke and throttle cables. If you don’t have any such parts might you suggest some places for me to look?

Thanks, Dave Hunt


From: WILLIS
Sent: Monday, November 16, 2009 8:44 AM
To: 'bikeboneyard'
Subject: RE: suzuki rv90
Received, thanks.
Willis


From: Ernie Watson
Sent: Friday, November 13, 2009 8:15 AM
To: brenda at bikeboneyard
Subject: Re: honda cb350

Thank you again! I am very happy I came across your website, I had been having a terrible time finding parts for my bike, and the only Motorcycle salvage yard around here wanted $200 for a set of carbs.


From: Shawn T. Storm
Sent: Thursday, November 12, 2009 1:58 PM To: brendaf@bikeboneyard.com
Subject: RE: 81 suzuki gs650

Perfect, Thanks for the shipping info!!! Looking forward to getting on the road one last time before the real cold weather hits. Thanks so much for your help and service, I mean it!!!
________________________________________

From: Nina
Sent: Monday, November 09, 2009 9:11 AM
To: 'brenda at bikeboneyard'
Subject: FW: Cylinderhead Honda CB 500T
Hello Brenda,
Received the cylinderhead in good order, happy with it.

Regards,
Alex Heezen


From: James Patterson
Sent: Saturday, October 31, 2009 2:43 PM
To: brendaf@bikeboneyard.com
Subject: rickman swing arm

the rickman swing arm you have listed can you have someone measure it shaft center to axle center and email me back?

by the way over the years I've found browsing your site is very entertaining and you've come up with a number of parts for me, thanks!


From: DoyleTXFL
Sent: Wednesday, October 28, 2009 3:46 PM
To: brendaf@bikeboneyard.com
Subject: Bultaco 215 shocks

They arrived today and I am vey pleased with them

Thanks

T.J. Doyle


From: David
Sent: Thursday, October 22, 2009 6:49 PM
To: brendaf@bikeboneyard.com
Subject: 1981 CR125 parts

Hey,

Your site rules. You have a lot of cool stuff on there. Found it by accident. Well actually, I guess this is kinda what I was looking for, I just don't remember the path that got me here. I love all the pics and the dream boneyard complex. Good luck. I am interested in some parts for a 1981 Honda CR125. If you still have the parts available can you send pics?
1. Seat - Does it say CR125R on the sides?
2. Rear wheel - what all comes with it?
3. Exhaust pipe
4. Front brake cable

What would shipping cost to residential address?
Thanks,

David Kimmel


From: Dan
Sent: Monday, October 19, 2009 11:22 AM
To: 'brenda at bikeboneyard'

Subject: RE: 85 Cagiva wmx 500
Now I KNOW I LIKE YOU! ........LOL!....LOOL!!...but I bet you're married with children.....LOL!

Mental hugs!


From: pndsmith
Sent: Sunday, October 18, 2009 11:49 AM
To: brendaf@bikeboneyard.com
Subject: parts for 75 enduro

Good morning,

Thank you for the cylinder and head for my 75 DT400. The bike runs great. New problem: oil tank has a leak in it. I would prefer a tank that is yellow but condition is more important than color. Please let me know what you have available.

Thank you,

Paul Smith


From: GEORGE
Sent: Thursday, October 15, 2009 4:29 PM
To: brendaf@bikeboneyard.com
Subject: rectifier

I am looking for a rectifier/regulator for a 1983 Honda CT110. I was told you are my best bet.
George
________________
________________________
From: Luke
Sent: Tuesday, October 13, 2009 7:23 AM
To: brenda at bikeboneyard
Subject: Re: 81 honda xl185 tank

The tank arrived yesterday! It looks great, thank you. I haven't leak tested it yet, but it seems to be intact! Thanks again.

-Luke


From: Jesse Kassler
Sent: Monday, October 12, 2009 4:49 PM
To: brenda at bikeboneyard
Subject: Re: honda cm400

thank you very much for sending me the crankshaft and connecting rods for the 1981 cm 400 t.

From: KRT Industries
Sent: Saturday, October 10, 2009 6:13 PM
To: brenda at bikeboneyard
Subject: Re: Yamaha Delivery

Dear Brenda,

The bike arrived today and it looks very nice. It will be a fun project. Haul Bikes is very professional. A huge bi-level enclosed truck, very organized, very safe, and the driver was very polite as well.

Thanks,
Kurt



From: JnS DnC
Sent: Tuesday, October 06, 2009 7:49 PM
To: brendaf@bikeboneyard.com
Subject: RE: MSN-Request: 1982 Yamaha xt

Hello, thanks I got the part. I will be getting more from you too. Just one question tho. for this bike do you have to have the battery?
Thanks
Stephanie


From: John Cozzarin
Sent: Tuesday, October 06, 2009 9:41 AM
To: brenda at bikeboneyard
Subject: Re: Part listed for 1980 cm 400

Thanks again,
The shop received the package late yesterday. They will install it over the next few days. I'll let you know how it goes. I appreciate your help in finding the stator !


~John


From: John Both
Sent: Tuesday, October 06, 2009 4:45 AM
To: brendaf@bikeboneyard.com
Subject: 1982 husky 250WR

Hi Brenda,
I bought a 78 Husky from you guys a few years ago & you gave me a good deal.
What can you do on this bike (82 Husky) shipped to NJ

Regards John


-----Original Message-----
From: Ordonez, Michael
Sent: Monday, October 05, 2009 10:23 AM
To: 'brendaf@bikeboneyard.com'
Subject: 69 honda cb-160

Hey Brenda! I always stop by your site and I think its just great! Congrats on all the success.

Im really interested in the 69 honda cb160.
I was wondering if you ship bikes? Im in the new york city area.
Thanks! mike


-----Original Message-----
From: The Dinnages
Sent: Sunday, October 04, 2009 9:03 AM
To: brendaf@montana.com
Subject: Re: bikeboneyard has sent you a money request

Hi there

Got the parts, thanks for all your help.

regards
Andy


From: Ray Green
Sent: Thursday, October 01, 2009 9:27 AM
To: brenda at bikeboneyard
Subject: Re: honda cl175

Brenda,

Thank you so much for your consideration on this order. I again apologize for the last minute change on the order. Your service is beyond excellent! I would like to order a tachometer for a 1975 TS185. As I had mentioned in our phone conversation yesterday, the mount treads for the drive cable receiver on the one I have are broken off short. Thanks again.
Ray Green


From: rlw
Sent: Monday, September 28, 2009 7:29 AM
To: brendaf@bikeboneyard.com
Subject: Kawasaki F9 crankshaft

Brenda. Removed crankshaft from engine that you sent and it works great. Thanks, Ron


From: Patty Stockton
Sent: Sunday, September 27, 2009 10:14 AM
To: brendaf@bikeboneyard.com
Subject:

Me again. I was talking to friend of mine telling him what a great place you have for us vintage guys and he asked if you might have a jug he is looking for. I told him I would ask, so do you have a jug to fit a 1991 xr600r honda? Please send info when you have a chance.
Thanks


From: Lowell T Patterson
Sent: Friday, September 18, 2009 2:34 PM
To: brenda at bikeboneyard
Subject: Re: rt180 kicker

Kicker arrived today! Thank you so much.
Lowell


From: YouTube Service
Sent: Tuesday, September 15, 2009 7:58 PM
To: bren59833
Subject: kirk c sent you a message: compliment's to you and the parts business,

help center | e-mail options | report spam
kirk c has sent you a message:
compliment's to you and the parts business,
Hi Bren,
I just emailed you about the 76 Suzuki RM 250 part's, Im glad you have this salvage yard, it makes it really nice for all us bikers and mxers too that need parts, or looking for a bike they dont have to pay an arm and a leg for, I like your video, you are really down to earth and personable, we need more ladys like you to help us guys to find parts or just be there to help with whatever you need in a freindly personable matter, I like your hairstyle and your smile too when you were talking about the lot, and business,im just 49 this year, so im with you in age too, If you wernt married as i know you have a good husband to help you in the business, Id like to have you onthe back of my bike , or even you driving in all seriusness, your very attractive , and its not very much that theres a lady like you in this business thats like you thats good with people and likes to help when she can, all the best to you and the parts business more You can reply to this message by visiting your inbox.


From: BRAD EGELAND
Sent: Wednesday, August 26, 2009 9:05 PM
To: brenda at bikeboneyard
Subject: RE: part recieved

Dear Brenda, I recieved the kicker today, it works great!!! Thank you ------ I will be wanting more parts in the future!!!!

Chad E.
Fargo


From: jim garvey
Sent: Wednesday, August 19, 2009 2:41 PM
To: bikeboneyard
Subject: Re: cz 981 lower end

brenda
got the bottom end yesterday thank you it was packed perfictly.when sorcing parts can i send you emails with what i am after.
cheers
jim
sydney
australia


From: Federico Marchán
Sent: Monday, August 17, 2009 5:27 PM
To: brendaf@bikeboneyard.com
Subject: RE: XS750 tank

Dear Brenda,

I want to really thank you guys for the XS750 tank. It was in great shape and a great price. I also received it very quickly. I hope to do business with you in the future. You guys are great.

Best regards,

Federico Marchan



-----Original Message-----
From: dkling81
Sent: Wednesday, August 12, 2009 8:01 AM
To: brendaf@bikeboneyard.com
Subject: 75 suzuki gt-550 -$900

Do you have a title for the 75 Suzuki GT-550? If you do, can you tell me what the Freight would be to a business . I will also check Freight prices here. I got the GT550 turn signal from you a few weeks ago in great shape and fast shipping. Thanks Dennis


From: Becky
Sent: Saturday, August 08, 2009 8:39 AM
To: bikeboneyard
Subject: Re: ts185 parts

Brenda,

I received the parts yesterday. Thanks!


Becky


From: Patty Stockton
Sent: Friday, August 07, 2009 6:37 PM
To: brendaf@bikeboneyard.com
Subject:

Brenda,
Received the kick start arm for my '75 cr250m Elsinore this morning and was riding once again. Thank you for the fast delivery and prompt service, you are a great asset to those of us who choose to ride vintage.

As I stated before, I am in the process of restoring this bike and there are a few parts and pieces I am still needing. First I need a kick stand, an air box top cover, chain tensioner and a straight set of handlebars as mine are bent. If you have any or all of these parts, please send an e-mail with prices. I will also be needing a complete lower end as the motor I have has a chunk knocked out of the left case allowing dirt and water to foul up the points. It would appear that the chain at some point has snapped and knocked out this piece. I would like the complete unit as my transmission is worn in third gear, misses 80% of the time, and am hoping to make a solid unit out of the two. Sorry for rambling on. Finally, I need a head for this motor as a fin has been broken off. Please check your inventory for these requested parts and send information when you have a chance. Thank you again for your time and attention.


-----Original Message-----
From: Phinius Shade
Sent: Friday, August 07, 2009 1:37 PM
To: bikeboneyard
Subject: RE: XS850/650 parts

Got that cover today. Many thanks, I'll be sure to get back with you when I go into the next phase of the rebuild.
Zach


-----Original Message-----
From: Jeff Goluszka
Sent: Thursday, August 06, 2009 7:25 PM
To: bikeboneyard
Subject: 1979 Honda cx500

I just received the ignition switch today and it works great thank you. I was actually wondering if you happen to have the carbs for the bike, and a seat? If you could please let me know.

Thanks,

Jeff Goluszka


-----Original Message-----
> From: James Archer
> > Sent: Tuesday, August 04, 2009 10:36 PM
> To: brendaf@bikeboneyard.com
> Subject: 1980/'82 Suzuki PE 175
>
>
>
> Thank you .. you helped me out alot ..Thanks;;;; J.D


From: Scott M Stutz
Sent: Monday, August 03, 2009 1:30 PM
To: brendaf@bikeboneyard.com
Subject: Suzuki M/C and res


Hi Brenda

Got the master cylinder on Friday. Looks and works great! The usual great service.

Thanks again

Scott


From: Lynette Morton
Sent: Saturday, August 01, 2009 12:32 PM
To: brendaf
Subject: Clutch cover

I was wondering what the cost of the clutch cover on the engine would cost for a 1981 Kawasaki KZ440 ltd would be. We just received the drive belt and clutch push rod that you sent and they work great. I am letting the guys I know who ride older bikes about you and your great service and prices. Thank you!


From: Braden Maccke
Sent: Friday, July 31, 2009 3:17 PM
To: bikeboneyard
Subject: RE: Airbox & Tank Rubber

Ask and ye shall receive – UPS just walked in to my office with both parts in good working order. Thanks, Brenda!

Braden


From: Winston Kilburn
Sent: Thursday, July 30, 2009 5:02 PM
To: brendaf
Subject: 1985 Kdx 200

Hello Brenda,
I am looking for a flywheel for bike and your list shows that you have one. If you still have it can you pleas send me a close up picture of the inside and outside? I want to see if the numbers match.
I recently bought some parts for my 1984 Kdx 200 from you and am pleased.

Thank you,


From: cwerks
Sent: Thursday, July 30, 2009 8:23 AM
To: bikeboneyard
Subject: Wow backatcha....

I was brousing the site and saw your pic and video....I gota say Wow back atcha... very nice and bikes are nice too, back.
This is me last year....oct 08 at the young age of 51. Now when I order you can put a pic with a email.


Your customer,
Kevin B


From: Larry Rackham
Sent: Thursday, July 30, 2009 9:18 AM
To: brendaf@bikeboneyard.com
Subject: Fuel Pump
I just recieved the fuel pump, THANKS for such fast shipping, I never recieved a fuel pump wrapped in hanes underware , I'll be laughing about that for some tome !!! LOL!!!


From: cwerks6
Sent: Wednesday, July 29, 2009 6:02 AM
To: brendaf@bikeboneyard.com
Subject: Thanks ...I recieved the ex pipe.

Hi , Just wanted to say thank you for hanging on to some pretty cool stuff and making it avaliable so we can still ride the old

Here is a coulple of pics of a couple of bikes you have helped me restore and race. I have won 5 AHRMA Expert Natls. on th RM in th last 2 yrs. I havn't raced th YZ yet...you just shipped me the pipe for the 360 conversion.
Do you still have the Right and Left number plates for th YZ250 B 1975. If so are they in decent shape. Also do you still have the 75 YZ80 feul tanks

Thanks, Kevin B


From: Karl Miles
Sent: Tuesday, July 28, 2009 5:22 AM
To: bikeboneyard
Subject: RE: 82 yamaha xj750j

Hello,
Got the parts yesterday, they worked out perfect, thank you very much !!
Thanks, -Karl


From: Brad Barshel
Sent: Saturday, July 25, 2009 2:23 PM
To: bikeboneyard
Subject: RE: MSN-Request: 1981 Suzuki GS1000L

Got it. It fits great. Thanks for your help.

From: james ivie
Sent: Tuesday, July 21, 2009 10:13 PM
To: bikeboneyard
Subject: Re: Parts

Wow, they went fast.Ok I`ll try again tomorrow on other stuff I need.Thanks for all your hard work, diligence and patience with the newbie.
James


From: Felipe Gregorio
Sent: Friday, July 17, 2009 12:11 AM
To: bikeboneyard
Subject: Re: 78 kaw kz400

Hi Brenda,
Just wanted to let you know that I got the parts today.
Thanks for your help.

Felipe.


From: blacknblueu
Sent: Tuesday, July 14, 2009 4:14 AM
To: brendaf@bikeboneyard.com
Subject: parts?

Hi,

I got the gas cap you sent, it works well, Thanks!

I'm wondering if you have a windscreen and mirrors for a: 1993 Kawasaki EX500 Ninja. If so please let me know how much. Venae


From: rob bain
Sent: Wednesday, July 08, 2009 6:31 PM
To: bikeboneyard
Subject: Re: Fw: polaris tx440

Got the pipe and tach, just what I needed thanks again for all your help.

Rob


From: peter esquinasi
Sent: Saturday, July 11, 2009 1:18 AM
To: brendaf@bikeboneyard.com
Subject: 86 gsxr parting

Hello, Peter here... I bought an 86 GSXR exhaust a while back. Worked great! Do you have a chain guard on it? (black plastic) also, re:seat recovered, can I get a picture when you get a chance??

Thanks,

Pete


-----Original Message-----
From: CodyRonda
Sent: Friday, July 03, 2009 9:47 PM
To: brendaf@bikeboneyard.com
Subject: hey thanks

hey thanks for the boots,, the carbs are on with new slip ons looks great ,,, had a problem trying to rate you as a seller, however i will spread the word. excellent!!!!!

back to buisness: do you have a good fuel tank for that thing?? please let me know a.s.a.p thanks brenda cody k/falls .or


From: Jeff Orchard
Sent: Friday, July 03, 2009 7:21 PM
To: bikeboneyard
Subject: Thank you

Brenda thank you for the prompt delivery with the oil pan. It fits great. My bike is once again rideable.

jeff Orchard


From: laurie brown
Sent: Thursday, July 02, 2009 7:07 PM
To: bikeboneyard
Subject: RE: motorcycle parts

hello, just received parts they are in great condition,thank you . if you ever run across a ignition switch email me, also a set of carbs and a rear wheel if not rusted up,with brake hardware up to brake rod. or maybe a whole list of what u have and prices. thank you again.


From: Jon Higginbotham
Sent: Thursday, July 02, 2009 9:40 AM
To: brendaf@bikeboneyard.com
Subject: Thank you

Hi there. Just a quick note to say “thank you” for your prompt service. A couple of weeks ago I needed a front brake rotor for my 1981 Honda GL500. Of all the replies I received, your price was the lowest, so I took a chance. Buying used parts over the internet can be a gamble. I was pleasantly surprised when my rotor arrived a mere 3 days after I ordered it and the quality was much better than I expected. I’m now back on the road, racking up the miles and smiles. Thanks again. Jon Higginbotham, Salt Lake City.

From: Chris Molloy
Sent: Wednesday, July 01, 2009 10:58 AM
To: bikeboneyard
Subject: RE: 1980 kdx 175 side covers

Brenda, Received the side covers today.They are in better shape than expected.Appreciated the great communication and fast shipping.
Thanks,
Chris


From: Nicholas Andres
Sent: Thursday, June 25, 2009 10:11 PMv
To: brendaf@montana.com
Subject: RE: Yamaha 750/850 special parts

Received my side covers on wed., Exactly what i needed
Thank You

N. Andres


From: Chambers Drilling Company
Sent: Wednesday, June 24, 2009 9:52 AM
To: Bikeboneyard
Subject: Yamaha CT1-175

Brenda

I received the kick stand and exhaust...all look good.


However, I find no place to bolt the kick stand to. Can you tell me if the kick stand bolted to the same bracket that the foot pegs are attached to. I may need that foot peg/ kick stand bracket also.
James Chambers Kalispell, Montana


From: Ray Green
Sent: Wednesday, June 24, 2009 8:57 AM
To: Bike Boneyard
Subject:

Brenda,

Got the Polaris seat and it is great! It is the exact seat that is on my ATV.
Do you happen to have the choke cable for this ATV? I also need the ignition switch/wiring since my switch is coming apart (currently held together with electrical tape). Thank you for your help.

Ray Green
Billings


From: Kirk Czechmeister
Sent: Monday, June 22, 2009 11:17 PM
To: brendaf@bikeboneyard.com
Subject: Awesome website

lOVE THE WEBSITE ... Enjoyed the write up by your buddy on the Iraqis as well. Totally support the US in the war despite the tragic losses of GI lives.

You have a lot of bikes here. Wow.
I'll tell all my buddies about your place.
Kirk


-----Original Message-----
From: Travis McMillen
Sent: Monday, June 22, 2009 1:26 PM
To: brendaf@montana.com
Subject: RE:

just got the starter today day installed it works great thanks again


From: gary
Sent: Monday, June 22, 2009 5:25 AM
To: brendaf@bikeboneyard.com
Subject: cb750k

Hi there

You seem to have a very good rep. with the folks on the SOHC4 forums so I thought I would search here.
I see you have several CB750 K models 72 -76 and I am looking for two complete front caliper assemblies. -swing braket, adjusting bolt, caliper, hard line as well. The bleed nipple and line should be free. I've got a couple from Ebay that are useless becaue they are siezed tight. let me know what you can help me out with. regards Gary Martell


From: fred4
Sent: Monday, June 22, 2009 5:06 AM
To: bikeboneyard
Subject: RE: 83 honda cr125

hi received that cover today thanks
well pleased with quality and shipping it seems like either this was a newish part or the bike has not done very much asif the bike has done very little parts can you tell me the cost to ship also the frame ,tank,seat subframe swingarmand linkage engine electrics pratically everything minus wheelsand forks regards


From: Shane Bettis
Sent: Thursday, June 18, 2009 7:11 PM
To: brendaf@bikeboneyard.com
Subject: 1985 xr 600

Hello Bren, I am wondering if this 85 xr 600 will interchange parts with a 86 xr 600r, I
have dealt with you before and you guys are awesome. Please let me know asap.

Thanks, Shane


From: Jerry Pickett
Sent: Saturday, June 13, 2009 5:57 PM
To: bikeboneyard
Subject: Re: 83 cr125

Hey Brenda, I was looking at your web site and saw your picture Wow! your a real Babe, thanks for checking on that part for me.

Jerry


From: Tyler McNaughton
Sent: Friday, June 12, 2009 8:00 AM
To: Bike bone yard
Subject: RE: yamaha rt180 rear wheel

Funny enough, I accually received it last night. Thanks Again for all you hard work. IT should work fine for me.


From: Jill Kandare
Sent: Thursday, June 11, 2009 10:28 AM
To: brendaf@bikeboneyard.com
Subject: suzuki gs550

Hi Brenda I just wanted to thank you. The 78 Suzuki GS550 runs and drives great. I get compliments on the bike when I take it to work. No one can believe I only paid $800 for it. I keep giving out your website address to people I hope it helps you. I also got the Honda running. Next time I'm in Zoo I will stop by and say Hi. I just wanted to let you know "You rock" Thanks again, Jill Kandare


-----Original Message-----
From: rick merwin
Sent: Sunday, June 07, 2009 12:16 PM To: brendaf@bikeboneyard.com
Subject: '83 Honda XL200 front wheel

Hi. Wheel arrived yesterday and now on the bike. Rim is true, straight. Thanks for including the brake hub too. Actually, the brake is larger diameter than my original, and much more effective!! Thanks again, rick


From: Scott M Stutz
Sent: Friday, June 05, 2009 8:58 AM
To: bikeboneyard
Subject: RE: yamaha rd-250/350 tank

Hi Brenda Just wanted to let you know that the tank arrived, gotta admit it's all I asked for. The usual great service as well.
You have had some interesting bikes for sale. Could you tell me the approximate cost to send a complete dirt bike like the Hodaka Wombat from MT to AZ just in case I get an irresistable urge to add to my collection?
Thanks and have a great weekend Scott


From: Pat Larsen
Sent: Thursday, June 04, 2009 4:39 PM
To: brendaf@bikeboneyard.com
Subject:

Hello Bren
I was wondering, do you ship to Australia? I have heard good reports about you via the Honda 4 web site and we don’t seem to have anything like your setup here in Aus.
Regards
Pat


From: Hensell, Rick A.
Sent: Wednesday, June 03, 2009 5:48 AM
To: bikeboneyard
Subject: RE: 1986 OR 1987 HONDA FATCAT TR-200

Received parts 6/2/09 look good Thanks!


-----Original Message-----
From: Shawn King [
Sent: Sunday, May 31, 2009 6:55 PM
To: bikeboneyard
Subject: RE: Spark Unit


I just made the payment through paypal. Thank you for your great service and fast responses. I'll be sure to pass along your website to friends. Can you let me know when you send the unit? Thanks again.


From: Lillian Merry
Sent: Wednesday, May 27, 2009 1:50 PM
To: bikeboneyard
Subject: ke100

Hi Brenda...I,m looking for a kawasaki g5 100 engine or a ke100 engine....the year is not important...well 72-99 all bolt in....need a good engine...let me know....and by the way the dt125 tank I got from you is great...thank you...Mike


From: Devl466
Sent: Friday, May 22, 2009 4:44 AM
To: brendaf@montana.com
Subject: Re: ref to suzuki gt750 exhaust

Thank you very much Brenda the Suzuki gt750 exhaust is fantastic, It was held up in customs for almost ten days but it was worth the wait, i can not thank you enough. These top right exhausts for this model are hard to find so if you find another in as good a condition please let me know, the very best of luck to ya from Martin in Ireland.


From: DingBusters
Sent: Thursday, May 21, 2009 10:18 AM
To: bikeboneyard
Subject: payment


I sent the funds off yesterday. Let me know when you ship and could you geve me the tracking number when you do?
Thanks
Bruce
PS> the handle bars look great.


From: leslie horton
Sent: Tuesday, May 19, 2009 6:30 AM
To: bikeboneyard
Subject: Re: 97 suzuki rmx250

Thx for the case hope to use you guys again soon. Do you still have any ATC 250 R complete for sale and or any 500 cc dirt bikes complete for sale Thx.


From: Nicky Trevino
Sent: Monday, May 18, 2009 5:26 PM
To: 'bikeboneyard'
Subject: RE: CR125 Part Needed

First of all, thank you for the carb manifold you sent out for the 1976 CR125. I was blown away that it showed up already.

This is a long shot, but do you have a head for a 1974-1978 CR125 that is an aftermarket head (DG, FMF, Webco,…)? How about an aftermarket pipe for same?

Lastly, any parts for the 1972-1975 Husky 125 bikes?


-----Original Message-----
From: mdelong1147
Sent: Friday, May 15, 2009 8:38 AM
To: bikeboneyard
Subject: RE: payment


hi,thanks for super fast delivery,part worked out great...mike


From: Lillian Merry
Sent: Wednesday, May 13, 2009 2:33 PM
To: bikeboneyard
Subject: dt125 gas tank

Brenda...just lettinmg you know that i recieved the tank and looks good to me....THANK YOU !!! Mike M


From: Adam Bashor
Sent: Tuesday, May 12, 2009 8:29 AM
To: brendaf@bikeboneyard.com
Subject: 84 XL200R

hey brenda, i bought an xr200 bottom end from you a while back (it's all good) and i see that you have an 84 XL200 listed now. Do you have the side plastics for this?

thanks


From: bernie
Sent: Wednesday, May 06, 2009 3:39 PM
To: brendaf@bikeboneyard.com
Subject: 78 tt500 parts

Hi, what condition is the tank, side panels and airbox in for the tt500. And what color are the panels and tank. I also need the two piece clutch push rod and ball bearing for an Ossa 250 engine.

I recieved the KLX swingarm I bought from you, and am very happy with the purchase.

Thanks,
Bernie.


From: lrice
Sent: Friday, May 01, 2009 4:06 PM
To: bikeboneyard
Subject: RE: You've got a payment

recived package today
everything looks great thanx much
LR


From: djlswalkerranch
Sent: Friday, May 01, 2009 7:54 AM
To: brendaf@bikeboneyard.com
Subject: Thanks

Hey, Thanks so much for the speedo, it;s really nice having someone like you for a nieghbor.. By the way you wouldn't happen to have an oil pressure switch for such a bike as mine would you? it's located just below the carbs. Mine was leaking and they aren't available anymore so I had to plug it. It would be nice to have the switch/light working agian. Dave Walker


From: Jonus Jonus
Sent: Thursday, April 30, 2009 9:30 PM
To: bikeboneyard
Subject: Re: 1980 Honda xl250 parts

I got the valves and they are perfect. Thanks for sticking with me and fixing the problem. I am a happy customer and will use you guys again!
-Marcus


From: Ken Farmer
Sent: Thursday, April 30, 2009 6:32 AM
To: 'bikeboneyard'
Subject: RE: Parting 80 honda cm400
Brenda Thank you for the part, it will do nicely!!! I will be doing business with you again. Thank you.
Ken



From: Clugston, Mary
Sent: Wednesday, April 29, 2009 11:58 AM
To: bikeboneyard
Subject: RE: honda cb450
Hi Brenda-thanks for all your help getting these old parts. Our old Honda motorcycle is now running & that has not happened in ALOT of years.
I did not think it would ever be road worthy again.

Mary


From: Charles Jevremovic
Sent: Wednesday, April 29, 2009 5:27 AM
To: brendaf@bikeboneyard.com
Subject: gs450e gas tank?
Hi Bren Great website. I like your political writing too.
is this tank still available? (or another one?)
http://www.bikeboneyard.com/suzuki%20gs-450%20e%20tank.jpg
how much shipped
thanks
Charles Jevremovic


From: nick arndt
Sent: Tuesday, April 28, 2009 4:55 PM
To: brendaf@bikeboneyard.com
Subject: 87 kx125

hi, just to let you know i was very pleased with my last purchase from you. now i am looking for another part for the bike. theres a rectangular cover on the left side if the jug thati need idon;t know what exactly it covers just that mines missing. if you have this part send me the price with shipping and i will send you a payment so i can get it. thanks alot nick


From: evoracer38
Sent: Friday, April 24, 2009 5:30 PM
To: brendaf@bikeboneyard.com
Subject: Thankyou parts look great

Brenda, thank you for the exhaust pipe and silencer for my Cagiva. They look great on my bike. Will be buying more parts in the near future.

Thanks Tony Arsenault


From: Clugston, Mary
Sent: Thursday, April 23, 2009 2:58 PM
To: bikeboneyard
Subject: RE: honda cb450

thanks-you are the best!!
Mary


From: Bob Willis
Sent: Monday, April 20, 2009 9:43 AM
To: 'bikeboneyard'
Subject: RE: !973 cb 175

Hi Brenda. Just an update. I will keep all the parts you sent me. There is NO NEED to
return the front fender. I did pick up a half way decent front fender this weekend. The fender you sent me is in excellent condition and I may use it down the road. I just wanted to say thanks for all the great parts. I may need more parts in the future!!! Thanks again Bob in Connecticut


From: Travis Lloyd
Sent: Sunday, April 19, 2009 9:48 PM
To: brendaf@bikeboneyard.com
Subject: cx500 headers & cdi

I was wondering if you would have a set of headers and a cdi for a 79 custom or deluxe?
thanks
Travis Lloyd

I bought a GL500 brake caliper from you a couple of months ago.
It worked great. Thanks

vicis pro novus


From: Math Huskens
Sent: Thursday, April 16, 2009 11:18 AM
To: bikeboneyard
Subject: Re: 74 kaw 750 triple parts

and received! Thanks and greetings from the netherlands!
kr, math


From: jw
Sent: Wednesday, April 15, 2009 3:02 PM
To: bikeboneyard
Subject: Re: xr 600r

Parts received. thanks, just what I needed John, (another satisfied customer)


From: turomar
Sent: Wednesday, April 15, 2009 11:46 AM
To: bikeboneyard
Subject: Re: You've got a payment

oh, wow. way cool! I never expected i'd get one of those.
you're just too awesome, brenda.



From: Randy Hatch
Sent: Wednesday, April 15, 2009 12:02 AM
To: brendaf@bikeboneyard.com
Subject: XT 500

Thanks for the good deals on parts over the years. I've gotten a lot of bikes running and sold because of you guys. I was just wondering, I inherited a 1979 Yamaha XT 500 from my father in law. It needs some top end work. I have no interest in keeping it. Do you think it would be worth my time to fix it up and sell it? Or do you think I should part it out? Do these bikes have a good following at all that you're aware of??
Thanks!!!

Randy


From: jonathan rusu
Sent: Monday, April 13, 2009 11:51 PM
To: bikeboneyard
Subject: Re: yamaha rt1 parts

Hey Brenda, I got the parts today and everything looks great. Do you have the Front Fender for this bike? If so, could I get a pic. I just installed the one I have and it looks like it is for a smaller bike.......boooooo. Also, do you have a working stator?

Thanks,
Jonathan


From: Bear
Sent: Saturday, April 11, 2009 5:19 PM
To: bikeboneyard
Subject: Re: 1992 RM250

Brenda, Charlie here from Canada. Just wanted to let you know that I received my package, and also wanted to say thanks very much. I look forward to dealing with you again very soon.
Regards
Charlie


From: DJ Hawkins
Sent: Thursday, April 09, 2009 1:08 PM
To: bikeboneyard
Subject: Re:

you guys are amazing thank you so much i apologize again for not sending you an email so long i just didnt have an internet conection at the places i was at can i pay you threw this email


From: Tom Wagner
Sent: Wednesday, April 08, 2009 6:45 AM
To: brendaf@bikeboneyard.com
Cc: Tom Wagner
Subject: '85 Honda Fourtrax 250 TRX Parts, please...

Hi Brenda! The previous order involved a fuel tank and CDI. They worked out perfectly! Thanks.

The next set of parts I'll need is as follows:

Throttle cable
Clutch cable
Transmission Shifter Lever "foot peg"...the little rubber toe lever off the main lever
If you've got 'em, please ship them to the following address with an invoice, I'll send you a check in the mail.
Tom Wagner


From: nickinlakecity bronson
Sent: Saturday, April 04, 2009 12:48 PM
To: bikeboneyard
Subject: Re: used motorcycle parts

Thanks for your help. Great site. I'm sure we'll be doing buisnes in the future.


From: Chris Walker
Sent: Saturday, April 04, 2009 1:05 PM
To: bikeboneyard
Subject: Another Part needed


Hi, I ordered the pulser from you which works fine, thanks. I need to find the reserve fuel tank selector switch (its switch which allows you to switch to the reserve tank) I am not sure of the exact name for it but I think I explained it enough. It is for a 1986 Honda Shadow Vt700c. If you have it I can pay promptly after I see the the price. Thanks...Chris Walker


From: Tom Wagner
Sent: Friday, April 03, 2009 10:42 AM
To: brendaf@montana.com
Cc: Tom Wagner
Subject: '85 Honda Fourtrax 250 TRX Parts...Again
Hi Brenda! The previous order involved a fuel tank and CDI. They worked out perfectly! Thanks. The next set of parts I'll need is as follows: Throttle cable Clutch cable Transmission Shifter Lever "foot peg"...the little rubber toe lever off the main lever If you've got 'em, please ship them to the following address with an invoice, I'll send you a check in the mail. Tom Wagner


From: J Bourke
Sent: Monday, March 30, 2009 4:15 PM
To: brendaf@bikeboneyard.com
Subject: cr125 ignition

G'day ,around this time last year I purchased a mx175 barrel/head from you which was in far better nick than I expected.I've just got to get a pipe made up for it and then should be ready for business(the mx175 never was distributed down here so it should get a few looks when entered in the 250 class).Anyway I've recently picked up a 75 mt125 which I'm hoping to enter into a new class called Vinduro.You can ride any old dunger as long as it has a headlight fitted(working or not it doesn't matter).The whole of the mt's ignition is knackered so I thought the best thing to do would be to replace it with a cr125 setup.I pulled the stator off my 77 cr125 and it fitted nicely so I reckon thats the way to go. I've been looking at your parts list for the 77 cr125 and you list the stator as still available,I was wondering if the rotor comes with the stator?As far as the cdi/coil is concerned I can get by using those off my cr125 but ideally I would prefer to fit/buy the the whole set up.I'm also after elsinore kickstart lever plus a fuel/gas tank cap to suit.I've found the chrome shock mount bolt's off the Yam dt/mx series look nicer on the cr's so would you have 8 in ok'ish condition?
Regards
Justin


From: Patrick Kenney
Sent: Wednesday, March 25, 2009 11:54 AM
To: brendaf@bikeboneyard.com
Subject: Kenney

Hello,
Thank you for the fast shipment of the last two wheels. Now I need two identical front 16” rims with enough meat in the hub to be bushed out to 1.5 “ I.D. These wheels need to be identical and have spokes spread evenly around the rim.
Pat


From: david carper
Sent: Friday, March 20, 2009 11:23 AM
To: bikeboneyard
Subject: Crap yes !


Hello Brenda, got that 30 lb package this morning, thanks alot, parts where as said..
willl keep an eye out for that label fer shipping..
have a great weekend Ms. Fennessey !

Dave C ..


From: Alston Carey
Sent: Thursday, March 19, 2009 11:26 PM
To: brendaf@bikeboneyard.com
Subject:

I just checked out your "Let Me See If I Have This Straight" commentary. Excellent I must say, clear and to the point. Good luck in all of your ventures.

Thank You,
Alston Carey
________________
_______________________
-----Original Message----- From: slowbird
Sent: Wednesday, March 18, 2009 3:20 PM
To: brendaf@montana.com
Subject: RE:

Hi Brenda, hey i got the gas tank today, it is absolutly perfect and way better than the one i have currently on the bike...its way better, thank you so much! Will send switch pics in a few days...thanks again! Jeff


From: Adam Bashor
Sent: Wednesday, March 18, 2009 8:22 AM
To: bikeboneyard
Subject: XL200 / XR200

Hey there,

Received the bottom end the other day... thanks, it should work perfectly. I am in need of some other things as well and thought i'd see if you have something.

Exhaust - I have the head pipe and that's it. I could use a good condition factory unit or if you have a nicer aftermarket slip on (FMF, Supertrapp type) that's the right size, i could fabricate a mid-pipe.
And, I need the plastic side panels. My frame is an 83 XL200R.
Thanks


-----Original Message-----
From: Bob Meyers
Sent: Sunday, March 15, 2009 4:02 PM
To: bikeboneyard
Subject: RE: Parts for my 1979 Honda XL500s

$110 first thing in the a.m..
Thanks Brenda, the testimonials re: bby I read sure ring true. Can't wait to get out on the road!


From: joshua riehl
Sent: Friday, March 13, 2009 4:53 PM
To: bikeboneyard
Subject: RE: You've got a payment

thank you so much for the fast responces and shipping. this will make my wife very happy to get these parts in and on the bike before it gets to nice outside.


From: Dick & Suzy
Sent: Monday, March 09, 2009 10:10 AM
To: brendaf@bikeboneyard.com
Subject: SL350--other stuff

Hi Brenda, got my steering dampener and the carbs---THANKS!! Other stuff I'm looking for--- the stock front tire, a 325/19 trials tread, also this bike came with a tool bag and tools [ I need] to go in the tool box which I do have. Can you hook me up?? Thanks Dick


From: Scott Farmer
Sent: Saturday, March 07, 2009 6:51 PM
To: brendaf@montana.com
Subject:

hello,
in regards to the carbs... THANKS they work great!!!! accually got to ride the bike for the first time today..... but i have another problem...lol.... do you have a petcock assy. for the 1980 suzuki gs 750 or one to match. the diaphram went bad while i was riding it. Thanks for your time ~Scott~


From: jim jackson
Sent: Friday, March 06, 2009 9:09 PM
To: brendaf@bikeboneyard.com
Subject: honda 305 scrambler
the scrambler tank is just what i needed. if you come across a honda 305 scrambler seat and another yamaguchi let me know. thanks jim

-----Original Message-----
From: Thompson, Stephen F
Sent: Friday, March 06, 2009 9:29 AM
To: bikeboneyard
Subject: RE: Can Am 250 frame

Brenda,
I received the frame yesterday and it was exactly what I needed, thank you for helping me out with this.


Steve


From: Scott Farmer
Sent: Thursday, March 05, 2009 5:58 PM
To: bikeboneyard
Subject: RE:

Thank you very much. You guys have saved my life so to speak. thanks again
Scott


From: Alan Frost
Sent: Wednesday, March 04, 2009 9:24 AM
To: brendaf@montana.com
Subject: Re: 78 honda cb750f

Brenda,

I just put the payment through. Please ship the tank to:
Alan Frost
Thanks! You were great to work with!


Alan


-----Original Message-----
From: slowbird
Sent: Tuesday, March 03, 2009 6:52 PM
To: brendaf@bikeboneyard.com
Subject:

hi Bren...Jeff Weldon here with the Yamaha HT1 90 enduro...i surelove that bike..hey was wondering if you had a left side (battery) cover for a 1967 Yamaha YL2 100cc single...I think the cover is the same as found on the trailmaster of the same year...please let me know and im happy to send the required funds...

Jeff Weldon


From: Dennywathke
Sent: Tuesday, March 03, 2009 4:57 PM
To: brendaf@montana.com
Subject: Re: Mark's Motorcycle Swapmeet at VINTAGEMX.US

Thanks, I already found the axle. It is on the way. If it doesn't work I will go to your web site and order the wheel from you. I have got some good KDX parts from you in the past and will definitely do more business with you in the future. Thanks again, Denny


From: dpete410
Sent: Saturday, February 28, 2009 12:42 AM
To: brendaf@bikeboneyard.com
Subject: Question about my Honda C100

Hi Bren
My name is Dave Peterson.
I purchased a 1962 Honda C100 from you about 4 years ago. You had it listed on your site as a parts machine. You also listed the entire bike for sale for $300.00. It was a red C100 with a white seat. It didn't have a carb. You sent it to me in 3 boxes via UPS.

4 or 5 years later I have the bike all together and it looks great. I got a carb for it and it runs great. I am extremely happy that I purchased the bike from you. I want to get the bike titled here in Illinois. In order for me to do that without too many snags I need a receipt or a bill of sale. Do you think it would be possible for me to get a receipt from you? Something in writing or maybe even something electronic that says you sold it to me for $300.00 in 2004? I realize this is a goofy request but I really want to ride this on the street with a title. The DMV really insists on a bill of sale before I can proceed with the title process. Any help in this matter would be greatly appreciated. Thank you in advance,
Dave Peterson


From: DJCHARLEY79
Sent: Wednesday, February 25, 2009 4:11 PM
To: brendaf@bikeboneyard.com
Subject: 1975' Can-Am 175' T N T

Hello Bren does that TNT still look that way ! I got one of them bikes cause a guy sold it to me for 150.00 bucks but mine's in a box and parted, If there's a way I ' ed stuff that bike in a box and cart it up here cause the bike you got has everything , have you done that before ! what kind of money are we looking at !, !, Bren I think your the best ! The air box you sent is great ! that fits a 1975' Kawasaki S 3 triple , I also want to share with you a bike I got from a guy how sold it to me for 300.00 bucks a 1973' Kawasaki S 1 triple ! Its locked up but its all there , Do you got a lower-end for a 250 S 1 , Its been a month and week since dealing with the man on a 1972' Kawasaki 250 triple bottom-end that was on e-bay , I need to let you now this has been a eye opener with this place , cause I' am coming about in the wind and going to launch an attack though E-Bay about this guy ! , The Gal said while i was up in dead horse that he sent the motor and its lost in the mail, So he sent one more lower-end to my address this time he has a tracking number we never got tracking and the engine he sent I never saw, and still not here , Bren you have been cool to deal with and the world will now about you and the good you bring through the dealings with the public and the good one on one between people , I can't help but hurt for this guy how deals like this , I will catch you later Donny !


From: Ebay
Sent: Wednesday, February 25, 2009 3:37 PM
To: brendaf@bikeboneyard.com
Subject: Yamaha JT1

Hey Bren. My friends at Mark's Cycle Salvage in Grass Valley, CA recommended you. I have several restos going right now and need the following parts: 71 Yamaha JT1 Mini Enduro - clutch and front brake cables, oil tank cap, throttle assembly (with kill button if possible), air cleaner assembly, gas tank badges, front fender, and steering head bearings (upper and lower - the things people throw away!). 69 Honda Z50K1 - headlight assembly, battery box with rectifier, and taillight. 80 Yamaha TT500 - complete rear brake assembly with backing plate, shoes, actuator, etc (this is the one with the box section swingarm and the backing plate does not use a stay arm, but slides on the swingarm itself), and wheel spacers. That's it for now; let me know if you have any of this stuff and pricing! Thanks!

Eric Bickel


From: Philip Benton/AppliedIT
Sent: Tuesday, February 24, 2009 10:00 AM
To: brendaf@bikeboneyard.com
Subject: shocks arrived

Brenda thanks for the quick turn-around on the shocks for my 81 XL500.I look foward to running this in the vintage class in the Desert 100 in Odessa,Wa in a couple of months.The shocks you sent look way better than what I have as orginals.Thanks again! Philip Benton


From: wooshebay
Sent: Monday, February 23, 2009 1:05 PM
To: bikeboneyard
Subject: Re: mt250 exhaust manifold

Awsome your a life saver id like to pay with paypal just let meknow where to send it and I will pay you.


-----Original Message-----
From: matt jenkins
Sent: Friday, February 20, 2009 5:35 AM
To: bikeboneyard
Subject: 72 CL 350 honda

Hi there, I am looking for a good set of cv carbs for a 1972 CL350 Honda, that are bolt on and go, it is ok if they need cleaned up but i dont want to get into the rebuild kit or repair game, hopefully you can help me, if so i would like you to send me some pics of them, the price/payment instructions for i am ready to buy!!. i would be willing to pay a little extra for the best set you have, or can get, For it would be worth it to me to save the headache. I bought a set of hugs and pistons for this very same bike from you a few months ago and was VERY pleased with them. I have them on and am riding now!! I just need to get this carb situation worked out and would GREATLY appriciate any help you could give me. Thanks a Bunch!! Matt


From: Tamara Erberich
Sent: Thursday, February 19, 2009 5:28 PM
To: brendaf@bikeboneyard.com
Subject: 1972 yanaha rt1 360

Re: 1972 yamaha 360 rt1.Just wanted to let you know I was very pleased with the
condition of what you sent me
.I need coil ,tach,speedo, I also need a ignition switch with key and the chrome ring that goes around the headlight Thanks Bob

Im trying to buy a 1974 Yamaha 360 Hope you ha
ve parts


From: roy owens
Sent: Thursday, February 19, 2009 12:03 PM
To: bikeboneyard
Subject: Re: harley sportster tank


thanks for the tank it arrived today and it looks great ,I'm looking for more chopper parts front forks back wheel fenders and seats and vtwins any make and model Honda Harley Yamaha act. look forward to doing business with you in the future
. bikeboneyard.com


From: Ray Green
Sent: Monday, February 16, 2009 9:28 AM
To: Bike Boneyard
Subject: Polaris parts

Brenda,

Received the Polaris atv parts on Friday. Thank you once again for the fantastic service! Everything looks great.

Ray Green


From: Paul Johnstone
Sent: Saturday, February 14, 2009 6:53 PM
To: brendaf@bikeboneyard.com
Subject: Honda SL100 parts

Brenda,
Hello, the powroll bottom end has worked out very nice. Took second place at the AHRMA vintage MX in AZ last week.

I need some stuff to build another SL100 racer I saw on your web page.. 76 TL125 wheels w/ brake plates. honda SL100 gas tank orange, or any color. Swing arm 75-77 honda XL125 or a TL125. 74-78 Honda XR75 kick starter. Let me know if you have these parts with price and shipping. Also will take any Powroll parts, engines,pipes,etc.

PS; I have attached photos of the bike with your motor in it.


From: dhealey35
Sent: Thursday, February 12, 2009 7:10 PM
To: brendaf@montana.com
Subject: ACERBIS HEADLIGHT

Hi Brenda headlight arrived today,looks good! Thankyou!! David


From: mannytonicha
Sent: Wednesday, February 11, 2009 5:34 PM
To: brendaf@bikeboneyard.com
Subject: 1982 cr125

hi its manny,i purchased a 1982 cr125 frame from you..its great!!!i realy need the swing arm pivot bolt.can you help???


From: mark palermo
Sent: Monday, February 09, 2009 8:33 PM
To: brendaf@montana.com
Subject: RE: Cr250 Fuel Tank ....

Hey B I received the second CR250 Tank today ... Looks Great !!
So do you have any other Aluminum tank your interested in selling ...??

Mark.


From: ~Larry ~
Sent: Monday, February 09, 2009 5:08 PM
To: bikeboneyard
Subject: RE: Honda xr front wheel

Hey Brenda... got the rim Friday, PERFECT!!! Just what i was lookin 4. Ill keep ya in mind 4 other stuff im lookin 4.

Thanks again, Larry


From: Rocky & Alan
Sent: Sunday, February 08, 2009 3:33 PM
To: bikeboneyard
Subject: Re: 75 penton 250 exhaust

Brenda, Received the exhaust and it looks good.
Thanks,

Alan Mason


From: jason silver
Sent: Saturday, February 07, 2009 9:12 PM
To: brendaf@montana.com
Subject: 1982-84 Suzuki PE Rear Brake Drum


Hey Bren

Hey it's Jason Silver, I bought an 1983 RM465 Fuel Tank off you guys a while back it
looks great now that its finished.


Anyways, what I'm looking for now is the Rear Brake Drum for a Suzuki PE175. The sprocket bolts to it. I think they were the same from 82-84. However... it has to be well under maximum wear spec for me to be interested. Max wear spec is 130.7mm. Mine's at 129.9mm Would you happen to have any on hand?

Thanx Jason


From: Daniel Bourlier
Sent: Thursday, February 05, 2009 9:03 AM
To: brendaf@montana.com
Subject: clutch

Hi Brenda,
just wanted to let you know how IMPRESSED I am with the service of you and your
company . I oredered a yz250 clutch from you Tuesday afternoon, its now 10:59 Thursday morning and my clutch is sitting on my front door step. not even a full two
days yet !!! thank you for all your help with my engine case and the clutch and I will definitely be recommending your company to my friends. have a great day.



-- Dan Bourlier


Date: Wed, 4 Feb 2009
From: "john norton"
to bren59833@yahoo.com
Hello,they arrived today.Excellent trade thank you very much.
Regards John


Date: Wed, 4 Feb 2009 21:36:06 -0800
From: bren59833@yahoo.com
Subject: honda stator
To: daneroffman
i will be in touch im going to get a couple other things for big red, from ya in the near
future , im tellin all my buddies out here about you, we have a few vintage bikes & it looks like you got lots of parts, im glad i found ya cheers


From: Larry and Beth Rattray
Sent: Wednesday, January 28, 2009 8:15 AM
To: 'bikeboneyard'
Subject: RE: 78 Honda xl-350 carb and kicker<

I received the carb and kicker and everything was in good shape and got here fast. Thank you for the quick service.

Do you have the tool kit for this bike. (78 XL 350) It has an 18 mm spark plug socket. I would also like to have a new rubber that holds the gas tank down on the back half, if you still have it.

Thanks,
Larry


From: newmessages
Sent: Tuesday, January 27, 2009 6:45 PM
To: bikeboneyard
Subject: Re: kawasaki h-2 frame and swingarm

Hi,

I received the H2 frame. Looks great. Thanks!

I see some exhaust chambers listed for the same bike. "exhaust pipes(aftermarket expansion chambers)---$150/set" and if they are still available would like to see some photos of them to see if they are something I might be able to use.

Thank you,
Mark


From: jim oglesby
Sent: Monday, January 26, 2009 9:09 PM
To: bikeboneyard
Subject: gas tanks

hi brenda,how are you situiated on useable gas tanks on old honda's? mine are in bad
shape! i need one for a 73 500 4.and 1 for a 72?175 that one runs really good and
only 1700 miles.the parts for susuki worked great! kids having great time with that one.let me now bout the tanks.
many thanks,
jim


From: TreysMom041207
Sent: Monday, January 26, 2009 3:52 PM
To: brendaf@montana.com
Subject: Re: Shipment Notice: A package has been shipped to you

thanks i recieved it at the post office it works fine to.


From: GARY CYNTHIA F GARTHWAIT
Sent: Tuesday, January 20, 2009 9:13 PM
To: bikeboneyard
Subject: MT250 parts

Thanks for delivery. Its perfect.
gary


From: Scott M Stutz
Sent: Monday, January 19, 2009 11:49 AM
To: brendaf@bikeboneyard.com
Subject: Great service


Hi Brenda

I can't believe I got the parts I ordered from you already! It's easier to get parts from you than local yards here in AZ. I will definitely be recommending you and buying from you in the future.

Thanks

Scott



From: bluenote
Sent: Saturday, January 17, 2009 1:20 PM
To: brendaf@montana.com
Subject: RE: 1980 LTD center stand

I got the bike stand a few days ago - THANKS!


-----Original
From: tdocdc
Sent: Sunday, January 11, 2009 8:14 PM
To: Bikeboneyard
Subject: Parts???

Do you have a non-rusty, undented tank to fit a 1975 Yamaha DT 175B, and a NICE
seat??? What all will fit a MX tank, DT 100, 125, 250??? If you have something for
me, how much incl. shipping to zip code 37363.
Thanks in advance, have bought from you before you always treat me right.


-----Original Message-----
From: sanders
Sent: Thursday, January 08, 2009 10:43 PM
To: bikeboneyard
Subject: Re: DR500 suzuki

Hi. I got the parts safe and sound. They are just what I needed. Thank you very much and may be getting a few more DR500 parts later. Dave Sanders


From: rlw
Sent: Wednesday, January 07, 2009 9:20 PM
To: brendaf@bikeboneyard.com
Subject:

Brenda. Just got the levers you sent, very good , Thanks Ron


From: Paul Johnstone
Sent: Tuesday, January 06, 2009 2:56 PM
To: brendaf@montana.com
Subject: RE: address/Honda SL100 stroker

Brenda, Motor is here safe and sound. Thanks, Paul


From: dpmcenthusiast
Sent: Sunday, January 04, 2009 12:32 PM
To: brendaf@bikeboneyard.com
Subject: Husky Forks

Looking for a good set of 40mm '82 or '83 Husky forks complete with triples, or a good set of 35mm fork tubes for a '79 Husky. Prefer the 40mm if possible. Have anything like that on hand? I have a friend who might be interested in a set of 40mm forks also. Did some business with you a couple of years ago on some Wombat parts and was prett happy with your service. Hope we can do it again.
Thanks a lot,
Dan McEntee


-----Original Message-----
From: dmcwelch
Sent: Wednesday, December 24, 2008 10:45 AM
To: brendaf@montana.com
Subject: Re: honda mr-250 tank

Just wanted to let you know that the tank arrived yesterday. Thanks and have a Merry Christmas.


From: Tim Wildman
Sent: Tuesday, December 23, 2008 4:31 PM
To: brendaf@bikeboneyard.com
Subject: boneyard stuff

I got the fairing that you sold me and it works great on my bike. do you have any hard saddlebags?(prefer with hardware)


From: Agapito Trujillo
Sent: Monday, December 15, 2008 11:52 AM
To: boneyard motorcycle parts
Subject: RE: honda cb400a

Recieved cdi & fork nut this am , thanks brenda... look forward to buying other tings from you..


From: rlw
Sent: Saturday, December 13, 2008 3:19 AM
To: brendaf@bikeboneyard.com
Subject:

Brenda. Just got the kicker , everything is great. Thanks a lot. Ron


From: KP Dubaldi
Sent: Friday, December 12, 2008 3:06 PM
To: bikeboneyard
Subject: 250 Can Am cylinder - THANKS!
Hi Brenda,
Received the 72mm 250 Can-Am cylinder last night and it's perfect, just like the ASE head.
Thanks again
-
Peter Dubaldi


From: Myron Barton
Sent: Thursday, December 11, 2008 8:51 PM
To: bikeboneyard
Subject: Re: Kawasaki KZ650C 9/77

Hi Brenda.
Got the 650 bracket today. Exactley what I wanted. Thanks so much for the smooth transaction.
I'm a crankshaft rebuilder for snowmobiles and quads. Do you have engine parts for such things. Thanks again...............Myron


----- Original Message -----
From: Tiifany Harmon
Sent: Wednesday, December 10, 2008 3:48 PM
To: brendaf@bikeboneyard.com
Subject: 96 yz125

thanks alot brenda i recieved the top end to the yz125 i am very happy with it.thanks. i have another question do you have the push rod assembly that goes to the governor, the chain, and the throttle cable


-----Original Message-----
From: wac5.5

Sent: Wednesday, December 10, 2008 3:25 PM
To: bikebone yard
Subject: 1995 cr250r swingarm

Brenda,
Swingarm arrived yesterday morning and all is GOOD!!! it's cleaned up and I installed a new bearing set ready to go. THANKS FOR YOUR SUPPORT!!!


wayne campeau


From: KP Dubaldi
Sent: Monday, December 01, 2008 8:16 PM
To: bikeboneyard
Subject: RE: 84 can am 250 ase head

Received the head today and it's great!
Thanks very much-

Peter


-----Original Message-----
From: Seth
Sent: Sunday, November 30, 2008 6:09 AM
To: brendaf@bikeboneyard.com
Subject:

Hi, do you have a front brake lever that would fit on my 86 Honda xl600? I need one that also activates the brake light switch when you squeeze it. If so please let me know about the price. Thanks.

By the way. I just ordered the RT180 kick-start lever and it was excellent. Got here fast, looked almost new, and was less than half of what I would have paid. So thanks again.

Seth


From: Russ Bubenko
Sent: Saturday, November 29, 2008 5:11 PM
To: brendaf@bikeboneyard.com
Subject: Yamaha XS650 front wheel spool

Hi . I'm looking for the spool for a Yamaha XS650 front wheel (don't need the rim, spokes, etc.) I believe the axle diameter is 17mm. If you have one of these, shipping and handling is to: I had purchased a rear drum/spoked wheel from you a while back, and was amazed with the quality...beautiful shape.

Thanks again,

Russ
__________
____________________________

From: Phil Maheu
Sent: Friday, November 28, 2008 9:48 AM
To: bikeboneyard
Subject: Re: Used motorcycle parts or complete,

Brenda I got the parts, thank you very much.. now I need a price on body side covers, and kick start lever( one with good teeth inside it ) also fuel shut off lever, and if you have some mirrors that were stock I'd be interested in, also the little clips that hole down the door @ the radiator cap, and finally a price on the 550gt as a whole shipment. thanks phil.


From: Travis Lloyd
Sent: Wednesday, November 26, 2008 10:27 PM
To: brendaf@bikeboneyard.com
Subject: $50 Quicksilver Fairing

I would like to get a shipping quote for the quicksliver fairing you have for sale.
I bought a caliper bracket from you a couple of weeks ago and it fit perfect thanks again.
The Quicksilver will go perfectly on my cx500.
I look forward to hearing from you.

Travis

vicis pro novus


From: wombatboy
Sent: Wednesday, November 26, 2008 6:41 PM
To: brendaf@montana.com
Subject: RE: Yamaha MX100B Project

Hi Brenda,
Just got the barrel today. It looks great. Thanks for everything, and have a Happy Thanksgiving.
Bill


From: hotrodsbygeorge
Sent: Wednesday, November 26, 2008 12:20 PM
To: brendaf@bikeboneyard.com
Subject: RE: 1983 RM 465 Front rim assembly

Hello Brenda,
I received the RM seat in the condition you described, Thank You.

Anyways, I am now looking for a front rim complete for that bike. It is a 1983 RM 465 with a drum brake.

Please let me know if you have one!
Thank You and have a great Thanksgiving!

George Dempsey


From: marty huyten
Sent: Monday, November 24, 2008 5:21 PM
To: brendaf@montana.com
Subject: montesa 242 air box / carb

just recieved eveything in good order Thanx Again i will let you know if i need anything else.
Beth


From: jason silver
Sent: Sunday, November 23, 2008 5:16 PM
To: brendaf@bikeboneyard.com
Subject: 82 RM465 Tank
Hey Guys

I bought the 1982 RM465 Tank off of you a while back… I thought I’d send you a pic of it now that I’ve restored it. It turned out great!!

Check it out!!
Thanks Again
Jason


-----Original Message-----
From: Chris Graham
Sent: Thursday, November 20, 2008 4:01 PM
To: bikeboneyard
Subject: Re: kick stand..

AWESOME!!!!!!
You're the BEST!

Chris :)


From: james klones
Sent: Thursday, November 20, 2008 2:04 PM
To: brendaf@bikeboneyard.com
Subject: Hi Brenda

Got the Hodaka tool boxes. I can make this work now! Thank you so much!!!

You are "the Bomb!"



From: Paul Johnstone
Sent: Thursday, November 20, 2008 10:36 AM
To: brendaf@montana.com
Subject: RE: Yamaha IT200

Brenda,
I will send you a check. To save some money. I think paypal fees are up to 5% now. my ebay rating is 100%. I have heard only good things about you and bike boneyard on the vintage motorcycle chat rooms. Could you email me a invoice with the yamaha IT200 info and what we have agreed on, I will print it out and send back a copy with the check.
Thanks, Paul Johnstone


-----Original Message-----
From: Cindy
Sent: Wednesday, November 19, 2008 5:20 PM
To: 'bikeboneyard'
Subject: RE: klx250 parts

I got the parts and they look great.
Thanks,
Scott


From: Tom Watts
Sent: Sunday, November 16, 2008 8:19 PM
To: bikeboneyard
Subject: Re: Parts for Yamaha

Thanks Brenda,
Just wanted to be clear on it. I think the IT 490 muffler would have fit on my IT 465 though it is a different part number. I will keep you folks in mind for other parts needs. You look like a good outfit and I liked your You Tube video! Tom


From: Bob Reese
Sent: Thursday, November 13, 2008 9:16 PM
To: brendaf@bikeboneyard.com
Subject: help

hi its me again bob reese and i was wondering if you do seadoos (water craft)? if so im trying to
locate a 947 or 951 motor. they are one in the same. and if you didnt thats fine just wondering if you could direct me to a place were they junk sedoos or crashed seadoos (sedoo / boat grave yard)? thank you vary much.

p.s. that ts125 motor runs great thank you vary much!

From: hotrodsbygeorge
Sent: Wednesday, November 12, 2008 2:54 PM
To: brendaf@bikeboneyard.com
Subject: RE: Satisfied customer

Brenda, I received everything for my little Kawasaki 100. Thanks again for your prompt service! Now I need a complete seat for a 1983 Suzuki RM 465. Don't care about the seat cover as long as the foam and anchors are OK. Could you please let me know if you have one , or know where I could get one
Thank You, George



From: Justin Brown
Sent: Tuesday, November 11, 2008 2:09 PM
To: brendaf@montana.com
Subject: RE: 74 kz400 parts

I got my parts today! thank you again very much for your help and the fast shipment!
I will be sure to check you guys out first when I need something again


Justin


From: tssporty71
Sent: Friday, November 07, 2008 10:50 PM
To: brendaf@montana.com
Subject: Re: Emailing: Picture 172

just wanted to say thanks for the great xs650 tank. also the cap had all the parts i needed thanks so much! im sure we'll be doing business again.
regards - tom


-----Original Message-----
From: Chris Graham
Sent: Wednesday, November 05, 2008 9:56 AM
To: bikeboneyard
Subject: Re: kick stand..

Awesome! It will be here for the weekend! Fantastic! thanks again Brenda looking forward to doing more business with you
Chris


-----Original Message-----
From: matt jenkins
Sent: Monday, November 03, 2008 5:41 PM
To: bikeboneyard
Subject: RE: 1972 Honda cl 350

Hi i recieved the jug and pistons, Very pleased, fast shipping would definatly do buisness with you again A++++, Thanks again for your help, Matt


From: joel caya
Sent: Saturday, November 01, 2008 8:50 PM
To: brendaf@bikeboneyard.com
Subject: 1985 XR350

Hi Bren, it’s Joel again. I need a rear wheel and brake hub for my 1985 XR350, you may remember I bought the rockers, head, and front fender from you. When I put mine together it ate a new rear bearing which is how it was when I got it, so something is up with it. If you still have the one you listed and it’s not f****d up was wondering if you’d sell it for $50.00. Thanks again, hopefully this is all that’s messed up for now. By the way all the other stuff worked out great, bike is put together and runs awesome.


From: Jason
Sent: Friday, October 31, 2008 12:39 PM
To: 'bikeboneyard'
Subject: RE: RM 465 Fuel Tank

HaHa… I received it yesterday…but thanx anyways.
I’m cleaning up the bad paint job now … overall it’s great and what I was looking for!

Thanx
Jason


From: Robert Joyner
Sent: Wednesday, October 29, 2008 2:56 PM
To: bikeboneyard
Subject: RE: 1979 XS1100 parts

Brenda - I received the bracket.... thank you -

Bobby


From: Clark, Fred A.
Sent: Tuesday, October 28, 2008 3:15 PM
To: brendaf@bikeboneyard.com
Subject: Thanks!

Bren:

Just a note to thank you for the 250 Yamaha lower end. Attached are two photos of the finished
result.

Fred A. "Rocky" Clark


-----Original Message-----
From: matt jenkins
Sent: Monday, October 27, 2008 1:11 PM
To: bikeboneyard
Subject: RE: 1972 Honda cl 350

Thank you for your buisness you have been really helpful :)


From: larry reed
Sent: Saturday, October 25, 2008 11:39 AM
To: bikeboneyard.com
Subject: Husky pART

Hi, Larry from Oregon again. My friend and I have bought parts from you before, and think you're great. !!!
Anyway, I need a small husky part. I have an '82 husky WR250 that needs a fork tube plug that is white plastic, and threads into the top of the fork and accepts the air valve- as one split. Please let me know if you can help.

Thanks!!!!


From: TERRY BALAAM
Sent: Friday, October 24, 2008 5:08 PM
To: bikeboneyard
Subject: OSSA BOTTOM END
THANKS VERY MUCH GUYS, Recieved today , Have the Frame ready for it.

TERRY, Like too go Sideways VINTAGE STYLE ( Ex Factory
CAN-AM) + BSA Twin + OSSA


From: tdocdc
Sent: Wednesday, October 22, 2008 1:06 PM
To: bikeboneyard
Subject: RE: dt360

Got the 360 jug, thanks a million. Great service!
DCampbell


From: Richard Goodman
Sent: Wednesday, October 22, 2008 5:54 AM
To: brendaf@bikeboneyard.com
Subject: looking for a carb...

Good morning,
c
I have a 1993/4 Kawasaki Vulcan 1500A and am looking for a carburetor.

I see you have one listed and was wondering if you still have it.

I have purchased from you before and was very pleased. I think a carburetor from any
1500 from 90 to 95 should work (maybe even earlier - not sure about that though).

Thank you,
Richard Goodman


From: Donald W. Mikkelson
Sent: Wednesday, October 15, 2008 7:17 AM
To: 'bikeboneyard'
Subject: RE: dt360

Brenda, Got the switch yesterday it was just what I needed, thanx. Don M.


From: Buddy Markley
Sent: Monday, October 13, 2008 7:55 AM

To: bikeboneyard
Subject: RE: yamaha rd400 heads

Brenda, I received those heads last week and they are just fine, thanks.


Thanks again.
Buddy Markley


From: Dale Sno
Sent: Friday, October 10, 2008 1:04 PM
To: brendaf@bikeboneyard.com
Subject: honda trx 250cc piston cyclinder

THANK YOU VERY MUCH!!!!!!!!! I JUST GOT PACKAGE TODAY AT 1:30 PM YOUR VERY QUICK!! THANKS AGAIN MINN. I WILL BE IN CONTACT AGAIN ON THAT 230cc QUADE SUZUKI SPORT MOTOR WE EMAILED ABOUT... HAVE A NICE WEEK END!!!!!!!!!! MINN.


From: Arvid Nernes
Sent: Thursday, October 09, 2008 12:56 PM
To: bikeboneyard
Subject: Coils

Hi
i just want to let you know that i received my coils today,
and they were in good condition, so thanks for fast delivery and all your help :)


regads
Arvid<
br>

- From: max goldberg
Sent: Monday, October 06, 2008 11:43 PM
To: brendaf@bikeboneyard.com
Subject: Motorcycle parts

Hello.
I have a list of parts I need. The highlighted items were not listed on your site. If you can send me pictures of the items, that would be great. Otherwise, I have heard great things about you, so I would trust you. Thanks!!!! Max


----Original Message-----
From: toytuner 4g user
Sent: Saturday, October 04, 2008 3:17 PM
To: bikeboneyard
Subject: Thank You

Just got the filter housing today and already have it on the bike, it
works great! You guys are a life saver! Im sure you'll hear from me
again when something else breaks on my bike. Thanks again!

-Nick Keene


From: kx1327
Sent: Friday, October 03, 2008 4:18 PM
To: bikeboneyard
Subject: Re: 1976 kz900?

Hi got the parts today,thank you for the fast shipping.
thanks Nik


________________________________________ From: tug
Sent: Monday, September 29, 2008 3:12 PM
To: 'bikeboneyard'
Subject: RE: MSN-Request: 1974 Yamaha SC500

Thanks for getting back to me so quickly-------what kind of condition are both items in , and do you have any idea of the history of the bike they were removed from/or are still on and could kick over to confirm it still has spark? Not trying to be a pain , but have had mixed results with used electrical components in the past------I have actually purchased from you a couple of times in the past and was very satisfied with the deals. If you feel that these are functioning , usable parts , please send me an invoice and I will be happy to wrap the deal up with Paypal. Thanks again , Mark.


-----Original Message-----
From: sprengersmolasses
Sent: Thursday, September 25, 2008 2:39 AM
To: bikeboneyard
Subject: RE: mx360 airbox

arived today,perfect . thanks bren
Ashley.


From: Dan Donaldson
Sent: Wednesday, September 24, 2008 9:29 PM
To: bikeboneyard.com
Subject: 65 honda cl72 scrambler part'sv

HI, was wondering if you could tell me the condition of some of the part's
for the 65 honda scrambler, the lower end, shock's, wiring harness and the
cylinder's if possible and maybe some pic's, I have ordered part's from you
before and they worked great.

thank's Dan.


From: Mike McConville
Sent: Wednesday, September 24, 2008 8:21 AM
To: brendaf@bikeboneyard.com
Subject: 83` KX 125 parts

Hey Bren, Mike in Atlanta here. I have purchased parts from you in the past with good results, Thank You! I am a collector / restorer of post vintage MX bikes and am currently working on an 82` KX 125, which I believe is very similar to an 83` which you have advertised for a parts bike. I need the “screen-cover” that attaches just in front of the radiator, I am willing to purchase the radiator if you will not break-up the parts. I also need the rear brake arm assembly complete with spring. Please respond to this email when time permits and Thank You in advance……Mike


From: Adam Gauthier
Sent: Wednesday, September 10, 2008 1:20 PM
To: bikeboneyard
Subject: Re: http://www.bikeboneyard.com/81%20gs-550.html

Thank you for the wonderful tank and now i am in need of another part. I am in need of a petcock for my 81 suzuki gs 550t. The part is discontnued through the dealer and if iI have to get a used one i am confident that you will have one that is in great shape. please respond about if you have one and the price you will require. thanks...Adam


From: peter gard
Sent: Friday, September 05, 2008 7:33 AM
To: bikeboneyard
Subject: RE: parkhill parts. has just sent you $210.00 USD with PayPal

hello bren...peter here ...just checking would you have the rear "grab rail from that 74 h2b ?...im still after one and have missed a coulpe on e bay..you never know it might be around somewhere!...anyway thanks for a great rear whell and hub its all shined up and on now with its new tyre...all; the best ..peter
________________________________________


-----Original Message-----
From: Leach,
Sent: Tuesday, September 02, 2008 12:49 PM
To: brendaf@bikeboneyard.com
Subject: Parts search
Hi, I have purchased a couple parts from you and are very satisfied. Now I have a question; Do you have a monoshock for my 1979 Yamaha IT175, in good condition? Mine is soft and I can't see that they are rebuildable.

Any information will be greatly appreciated.

Respectfully,

Doug

From: The Lange's
Sent: Saturday, August 16, 2008 11:36 PM
To: 'bikeboneyard'
Subject: RE: 86kdx200 front brake hose

Item arrived Friday. All is well. Thank you very much for the speedy service. Have a great weekend.
Gavin


From: Gustavo Obregon
Sent: Wednesday, August 06, 2008 5:18 PM
To: bikeboneyard
Subject: RE: 1978 xs1100

Excellent, you guys are great.

Thanks,
Gus


From: sean cole
Sent: Sunday, August 03, 2008 12:04 AM
To: bikeboneyard
Subject: thanks

hey, i just got the part that you sent me for my '79 CM400T, they look great thanks, i looked all over the web for those boots and couldn't find them any where else. if i need more parts i'll hit you up.

thanks again,
sean cole


From: Bill Hillman
Sent: Friday, August 01, 2008 1:16 PM
To: 'bikeboneyard'
Subject: RE: bill hillman has just sent you $130.00 USD with PayPal

runnin good thanks again guys hope you can help next time i need some
oldies. bill


-----Original Message-----
From: David Ganote
Sent: Tuesday, July 29, 2008 10:17 PM
To: bikeboneyard
Subject: Re: Bike Boneyard - GPz750 wheels

Hi Brenda, Wheels showed up quickly and will work just fine. I was surprised to find a small wasp nest in the rear wheel, complete with wasp :). Both of us survived the encounter. Do you still have the full headlight assembly for the 82 GPz750? What I'm really looking for is the nacel - or the black plastic piece the headlight attaches to and all the wiring runs into. If it has any cracks I wouldn't want it - I already have a cracked one. Thanks.


From: Edward Reidy
Sent: Monday, July 28, 2008 6:46 PM
To: bikeboneyard
Subject: Re: 1984 Suzuki

The 1984 RM125 forks arrived today and look great Thanks again
Ed Reidy


-----Original Message-----
From: Fuzzie Patnaude
Sent: Thursday, July 24, 2008 5:16 PM
To: bikeboneyard
Subject: RE: carbs

No problem! The carbs looked great...Thanks.

PEACE AND BEWILDERMENT!!!


From: BRAD EGELAND
Sent: Thursday, July 24, 2008 1:29 PM
To: brendaf@bikeboneyard.com
Subject: more parts needed

hey B.

Thank you for the cdi, it worked great. I need more parts for my 1982 suzuki gs650g. Can you send me the price plus shipping for the following parts;

Headlight Starter relay (siolonoid) (2) orange reflectors that screw into the forks front fender I will need some more parts for the same bike latter on!!!!!!!!!! about the headlight, I have the shell, I need the light, wires, and whatever holds the light in place, also I need the hardware for the fender.

THANK YOU

Brad Egeland


From: Clayton Davies
Sent: Friday, July 18, 2008 8:40 AM
To: bikeboneyard
Subject: RE: Question about parts

I got the part and it looks great. Thank you very much. If you by chance
find the right side cover let me know.

Thanks,

Clayton Davies


-----Original Message-----
From: liammsheridan
Sent: Wednesday, July 16, 2008 12:21 PM
To: brendaf@montana.com
Subject: parts

hi bren,liam sheridan here parts arrived today everything 100% great doing business first class service i will be in contact soon regards liam


From: Ross Hughes
Sent: Monday, July 14, 2008 8:09 PM
To: brendaf@bikeboneyard.com
Subject: THANK YOU!!!

Hello,
I just got the kicker for my 1976 YZ125C and was worried it might not be the right one......YOU ARE AWESOME!!!! It is right and fits perfectly!!! Shipping was screaming fast, and prices are unbelievable!! I promise to send business and buy a lot more myself, you will be the first place I look as I restore the older metal tank bikes! I am looking for an exhaust pipe for a 1974 Honda XL70.....an SL70 could work as well.......do you have anything?

Thanks again!!!!

Cheers,


-----Original Message----- From: admin
Sent: Sunday, July 13, 2008 10:52 PM
To: bikeboneyard
Subject: bikeboneyard.com v2.0

Greetings-

Thanks for selling me the KE100 (and not laughing at me too much). Hunter is thrilled and so far no one has been injured.


From: Ross Hughes
Sent: Saturday, July 12, 2008 12:22 PM
To: bikeboneyard
Subject: RE: 1976 Yamaha YZ125C

Brenda,
Thank you so much!!!! Thanks for all your help as well!!!

Much appreciated and I will give and send you more buisness!!

Cheers,
Ross



-----Original Message-----
From: Robert Clark
Sent: Monday, July 07, 2008 10:46 AM
To: 'bikeboneyard'
Subject: RE: 87 kx125 seat and clutch

Hello
I got my parts today and I just wanted thank you for the fast and great service.
Robert Clark
Clark’s Coating Inc.


-----Original Message-----
From: juan oliver lopez
Sent: Thursday, July 03, 2008 2:21 PM
To: bikeboneyard
Subject: klx250 80 side panels

________________________________________ Hi! the klx side panels are arrived. Thanks you very much!!!


From: kevin sebourn
Sent: Sunday, June 29, 2008 10:50 PM
To: bikeboneyard
Subject: RE: carborator


thank you very much for the carb. it fixed my bike an i will use u again.


From: Rawb Wall-ace
Sent: Wednesday, June 25, 2008 10:00 PM
To: bikeboneyard
Subject: Re: Emailing: CIMG0307

Recieved the rim today. Looks pretty good. Cant wait to switch my tire over and get her rippin! Thanks again for sending it.


From: rlw
Sent: Monday, June 23, 2008 10:58 AM
To: brendaf@bikeboneyard.com
Subject: 1972 F9

Bren Thanks for the stator you sent, it works great. I would like to order some more stuff for my F9. I need a set of blinkers, the front set hang from the handle bars on this model. I need a rear brake light switch. And the last thing is a baffle tube. Last time I asked you quoted me a price on a total exhaust. That will be OK if that’s the way it goes. Could I pay you for this through PayPal. Please send me an invoice, and thanks again, Ron.

From: DJCHARLEY79
Sent: Sunday, June 22, 2008 4:19 PM
To: brendaf@bikeboneyard.com
Subject: about the ds-250 and smaller LT-100

I am going to work on the 24th of June and will come back on the 8th of July , to get the splined kick starter shaft and a kick pedal, the DS-250 i found the engine case I.D. that says its aTS-250,So i now those parts will work from stock pile , also the engine i bought from you three years ago a R-5 bottom end is working great on a RD-350 set up using the RD-350 jugs from a 1974' ,I thank you big time Bren its always cool you make it happen , later Pard Donny !
From: James Thomas
Sent: Friday, June 20, 2008 10:29 PM
To: bikeboneyard
Subject: Re: yamaha seca 650 forks

Got them today. They look great. Thank you.
James Thomas


From: Carol
Sent: Friday, June 20, 2008 9:02 AM
To: Undisclosed-Recipient:;
Subject: Fw: 87 kdx stator

Thank you, the service was excellent--I got the part the next day!!
Carol


From: Will Clack
Sent: Thursday, June 19, 2008 1:01 PM
To: bikeboneyard
Subject: Re: 1979 rm 250

Bren
RM 250 airbox and kicker arrived today,better quality than i expected for a 79 bike !! Thanks a plenty for a great service. regards Will


From: Mick Winger
Sent: Thursday, June 19, 2008 12:13 PM
To: bikeboneyard
Subject: Re: Motorcycle Parts

Brenda,

#1). Parts arrived and I was extremely happy.
. Great doing business with you
.

Regards,

Mike


From: kevin sebourn
Sent: Wednesday, June 18, 2008 9:50 PM
To: bikeboneyard
Subject: RE: Thanx

Thank you for the part it worked and it came quickly so i will probally order from you again in the future.
________________________________________

From: Andre Bennett
Sent: Sunday, June 15, 2008 10:15 PM
To: brendaf@bikeboneyard.com
Subject: 1977 Yamaha dt 250 parts

Hello Bren

I had ordered parts from you in the past for a 1971 Yamaha ct1 175cc and was very pleased with the result. Since then I have purchased a 1977 Yamaha dt 250. Much better lol... I am planing to restore it but I`m missing quite a few parts as you can see in the photo. I require the following, tach, speedo, ign switch with key, headlight bucket, headlight, headlight ears (x2), tailight and bracket, right passenger foot peg, the `250 dt` missing on my left fearring, the washer that holds the rear fender in place (pointed out in the picture) and if possible a front fender like the white 250 with the slots in it. Andre


From: Trevor Blackwell
Sent: Wednesday, June 11, 2008 10:07 PM
To: bikeboneyard
Subject: RE: honda cj360

Awesome! Thanks for the fast and friendly service



-----Original Message-----
From: 78montecarlo
Sent: Monday, June 09, 2008 6:07 PM
To: brendaf@bikeboneyard.com
Subject: Part

I know you don't have a 1986 cr500 listed, but was wondering if you would know where I could get a CDI box for the 1986 model. I have been told that only 86 will work and everyone tells me your the best. Thank you for your time


-----Original Message-----
From: fonville
Sent: Thursday, June 05, 2008 9:26 PM
To: bikeboneyard
Subject: RE: Tracking number

No problem.

So far, I can say I am extremly pleased with the condition of the bike. Other than the plastic it doen't look like I will have todo much work to get it up and running nicely.

Thanks again, and it feels good to hve a Maico 490 again.

You rock!


Jimmy


From: The Patrows
Sent: Wednesday, June 04, 2008 6:32 PM
To: brendaf@bikeboneyard.com
Subject: XL 250 bars

Hi Bren
Just a note to let you know that I received the Honda XL250 handlebars
yesterday. Very, very happy! Thanks so much. I'm always a little
concerned with ordering off of the net....not so in this case. I'll be checking your site for other parts for my various projects. Very satisfied customer.


Cheers,



From: John Johnson
Sent: Monday, June 02, 2008 5:56 PM
To: bikeboneyard
Subject: RE: TT500 Stator & Ign Cover

If the stator is complete with backing plate, the ign cover isn't cracked and the coil is functional, you can send me a Paypal invioce for the 78 TT500 stator, ignition cover and coil. Ship all in one package, thanks. Received the TT500 frame today, excellent, just what I was looking for.

Thank you, John Johnson


From: Mark Tarabochia
Sent: Tuesday, May 27, 2008 7:51 PM
To: bikeboneyard
Subject: Honda 1971 sl 350 20000001 series

Thank you for the forks and bars. They are just what I needed. But now I need a frame and Title for a Honda 1971 sl 350 20000001 series. You listed one for $100.00 if you still have it, I would like to buy it. Please let me know how much for shipping. Thanks again Mark Tarabochia


From: Gregory Bernard
Sent: Thursday, May 22, 2008 5:39 AM
To: brendaf@bikeboneyard.com
Subject: THANKS

Thank you very much for getting back with us so quickly. I'll be sure to
recomend you to anyone that need parts. Agian THANKS



-----Original Message-----
From: Eric Lisa Anderson
Sent: Tuesday, May 20, 2008 5:38 PM
To: bikeboneyard
Subject: XT 550 silencer

Got the silencer today., Thanks It is what i needed
Eric


From: Michael Michalenko
Sent: Monday, May 19, 2008 7:03 PM
To: brendaf@bikeboneyard.com
Subject: 84 cr250 parts

Hi,
I'm looking for the water pump cover and most importantly the water pump baffle plate for a 1984 CR 250. Would you have those parts for sale? How much total shipped
I've purchased parts from here before and was happy with the service.
Thanks! Mike Michalenko


-----Original Message-----
From: Eric Story
Sent: Sunday, May 18, 2008 10:53 PM
To: bikeboneyard
Subject: need more stuff

hey,
thanks for the kick start, it arrived in great shape and very quickly...I was wrong the bike is a 1979 DT 175F (not a 78) but the kick worked...anyway, I also need 1)a right sidecover (as you sit on the bike) in crystal silver color and 2)a fuel cock assembly...I am not trying to restore the bike, only to make it functional so 1)the side cover can be used or original or remanufactured (whatever is cheapest) BUT the fuel cock assembly needs to be brand new...please send back cost and details and I'll reply...thanks!


From: Lewis Kennedy
Sent: Saturday, May 17, 2008 11:00 PM
To: bikeboneyard
Subject: Re: rt2mx lower end

Got it and it looks & feels great, the packing was great as well, I can see
where you get the energy to run a place like that.


lewis k


From: Jay Wettstein
Sent: Wednesday, May 14, 2008 9:50 PM
To: bikeboneyard
Subject: Re: rekluse cover

got the rekluse cover today and installed.
thanks for your help,



-----Original Message----- From: Richard Poxon
Sent: Wednesday, May 07, 2008 10:42 AM
To: bikeboneyard
Subject: 1974 Honda MT 250 Switch

Thanks Bren, the switch arrived yesterday and everything electrical is now in working order. Thanks again, Richard Poxon.


From: CASEY CURTIS
Sent: Tuesday, May 06, 2008 5:26 PM
To: bikeboneyard
Subject: RE: rekluse

Yes, the brake kit arrived today. Thank you so much for the good deal.


Casey


From: John Young
Sent: Saturday, May 03, 2008 10:19 AM
To: bikeboneyard
Subject: Re: Looking for a 1973 Honda SL 125 K1 A motorsport fuel tank

I got the tank. It's great. There aren't any dents and it isn't rust out.
Thanks.


Regards,
JY


From: Kurt Lund
Sent: Friday, May 02, 2008 11:58 PM
To: bikeboneyard
Subject: THANK YOU!!!!

Hi,Bren
I recieved the DT parts!
Excellant shape,thank you!

Take care,Kurt.


From: shaun Trainor
Sent: Friday, May 02, 2008 4:58 PM
To: bikeboneyard
Subject: RE: Kickstart lever

Hi Brenda thanks for the kick start the TT600,I just got it today and it fits
once again thank you and will like to deal with you again in the future
for more parts for my many motorcycles Cheers Shaun.



From: Kustom1957
Sent: Friday, May 02, 2008 4:29 PM
To: brendaf@montana.com
Subject: Re: mx175 cdi and coil

The box arrived today. Great service. It was nice dealing with you. I will
definitely contact you when I need to find more vintage bike parts.


Thanks for your help,

Rennie


From: Bob Mooney
Sent: Thursday, May 01, 2008 10:43 AM
To: bikeboneyard
Subject: RE: Robert Mooney

I recieved it today,thanks so much,have a great day.Bob.....


From: Glen constable.
Sent: Thursday, May 01, 2008 12:50 AM
To: bikeboneyard
Subject: Re: 80 pe 175 airbox

hi Bren, thanks for that its excellent,ive got a list of other stuff ,ill get back to you shortly.....glen



-----Original Message-----
From: Joe Santmyer
Sent: Thursday, April 24, 2008 6:26 PM
To: bikeboneyard
Subject: RE: 1977 IT-175 / 1980 IT-175

Brenda,

I got the motor put together and installed today. It's running like a scalded dog! Thanks again.

-Joe


From: Gargoyle Customs
Sent: Thursday, April 17, 2008 2:43 PM
To: brendaf@montana.com
Subject: crank trigger needed

The bike bone yard has gotten me out of jams in the past. Hope you can
help me again.


I need a timing sensor for a 1986 Suzuki Intruder 700. The manufactor
discontinued the part. On the websites, it's called a timing sensor,
however, my husband refers to it as a crank trigger.
v
Do you have a working one of those?
Dee


From: John Schmidley
Sent: Friday, April 11, 2008 2:25 AM
To: brendaf@bikeboneyard.com
Subject: Coils

First off I want to thank you for the wire harness
Very good shape very pleased with part
.
I now have the bike turning over but no spark.
I am thinking the coils are bad.

Do you still have them and what would price be with shipping.

Thank You


John


________________________________________ From: James Beers
Sent: Tuesday, April 08, 2008 7:51 AM
To: brendaf@bikeboneyard.com
Subject: '83 GS650

Bren
I’m looking for side covers for my 1983 Suzuki GS650GL. Color doesn’t matter because I painted the bike a custom color. I also need a battery retaining strap. I ordered from you previously and I’m very pleased with your service. I hope you can help me with this also. You can respond by E-mail . Thanks for your help


From: wjeffries15
Sent: Monday, March 31, 2008 2:32 PM
To: brendaf@montana.com
Subject: Re: ts185 pipe

haha i found it on my porch under the swing looks good thanks!, you ever
see if you had a magneto cover for a 76 ts 185 or do you know the
years that interchangeable with? also do you have a rear fender and
inter fender thankss!!


From: Norris, Daniel
Sent: Tuesday, March 25, 2008 5:21 AM
To: bikeboneyard
Subject: 1984 XT250 Yam

Well, I received the Head and cover for the Yamaha last Tuesday and everything looks great.
I like the why you guys worked with me and I will be looking for more partsin the near future.


Happy Trails DAN


-----Original Message-----
From: J Mc
Sent: Sunday, March 16, 2008 10:53 PM
To: brendaf@bikeboneyard.com
Subject: mx 80

Heya Bren, this is John McGlenon, I have bought
several things from you over the past year or so and you have really taken care of me and i appreciate the service.
I bought a mx 80 the other day and i need a kicker and shaft. I didn't see anything listed in your mx 80 stuff, but i was told that other models were the same. ebay has some buy it now pieces for around $52 dollars but if you have the parts I would rather give you the business if other models apply. Thanks John McGlenon


-----Original Message-----
From: rippey4
nt: Saturday, March 15, 2008 1:29 PM
To: bikeboneyard
Subject: RE: 83 atc 200


Thanks for all, We installed the axel this morning and is running great. Have a good day,


From: Charles Flippen
Sent: Saturday, March 08, 2008 9:12 AM
To: brendaf@bikeboneyard.com
Subject: CL 175 Head

Thanks for the transaction. Looks like it will work for my purpose.
Dang! I wished you had not disassembled it. I was hoping just to bolt it on.

I am Happy with the deal.

Thanks again.


Mizebuc
Sent: Wednesday, March 05, 2008 7:41 PM
To: brendaf@bikeboneyard.com
Subject: (no subject)


I had bought a rear master cylinder for a 1988 trx250x, from you about 2
weeks ago. I need a decomp cable and a reverse shifter cable aswell.
if you still have those parts please let me know. thank you. P.S. very
happy with the rear master cylinder and spreading the good word
about your site.



From: geofffred
Sent: Wednesday, March 05, 2008 9:34 AM
To: brendaf@montana.com

Subject: RE: 1991 CR125

Received the front rim today, and I must say I'm COMPLETELY Happy ! Thank you very much. I've also included my father in this email as he restores Cushman's and is working on some 60's era Honda Dreams. Not only did you describe 100%, you also included the brake rotor, axel, spacers, bearings & seals, and even a useable tire/tube.....!! You guys are awesome - I'm telling everyone to check you out !! I dragged my butt and didn't send any $$ until late and then it was a personal check and yet I still got the rim + extras in record time !! If I can ever be of service please let me know ! Once again, thank you !!
Sincerely,
Jeff


From: Rich Zifer
Sent: Monday, March 03, 2008 7:55 PM
To: brendaf@bikeboneyard.com
Subject: 78 350 xl frame

Hi. Just wanted to say that I was pleased with the 78 xl 350 frame that I purchased from you, also your response to my e-mails were very quick. Thanks. Rich.


From: Brandon
Sent: Sunday, February 24, 2008 10:05 PM
To: brendaf@bikeboneyard.com
Subject: bike boneyard

Hello
I was on your website looking for parts for my 1982 Yamaha MX 80 and i found a few parts. But before i consider purcahsing them, i was wondering if the pirices were final (Im only 15 and i dont really have hundreds of dollars for parts)
The parts i was looking for were:
a rear tire and front fork seals.
If you could give me your location i could arrange for them to get picked up.
I was also wondering if you would trade one of the parts for a frame from the same bike, i got this frame from a salvaged bike dealer in williams lake, british columbia, canada. It was a full bike but the motor didnt run. The motor got thrown out when i was working on it at school. so now i just have a frame. I have heard alot of good things about you and your boneyard
Im From Smithers, BC Canada and we only have a honda dealer, so i cannot access parts easily.

thank you for your time

Brandon
_____________

___________________________ From: micheal carter
Sent: Sunday, February 24, 2008 12:42 PM
To: brendaf@bikeboneyard.com
Subject: parts for a 81 kawasaki kz 440 ltd

Hi, My name is Mike. I am looking for a sprocket cover , clutch cable,clutch leaver and leaver mount for my 81 kz 440 ltd. I just found your site about a month ago. I have told a few of my friends about your site. All of which have older bikes they need parts for.You look like a great resource. Please send a list of prices or one price for all. One more thing I don't know how to pay you.Is visa ok? Thanks for your time MJCarter


-----Original Message-----
From: David Hatcher
Sent: Saturday, February 23, 2008 4:11 PM
To: brendaf@bikeboneyard.com
Subject: Honda CB 100s

Hi Bren, thanks for the reply . By the way..the headlight bucket and
mount you sold me for my XL175 was a Purrr fect fit !! Or as the wife
says( the cats meWOW) !!!!
We hope your lucky kitty is doing well , and
your other boneyard pets also. Thanks again for all your help, past and
present!
David and Robin H.


-----Original Message-----
From: slowbird
Sent: Friday, February 22, 2008 11:39 PM
To: brendaf@bikeboneyard.com
Subject: 1971 Yamaha 90 Enduro

Hi b, Jeff Weldon here....well the little Yamaha 90 is just about done...it's like new now and all I need to do is get a friend of mine to repaint the tank and clear coat it...it has been a very fun project and I learned a lot I think...really cool....many thanks for the bike and the help, it has really been fun...

Jeff


From: bjsclem]
Sent: Thursday, February 21, 2008 9:48 PM
To: brendaf@bikeboneyard.com
Subject: Parts

Hi Bren, Checking in if you have any 74 75 cr 125 elsinore bikes or parts or any coming in soon.
I also wanted to thank you for the DG swingarm and head it was great stuff.

Thanks again,

Bill


-----Original Message-----
From: David Hatcher
Sent: Thursday, February 21, 2008 6:09 PM
To: brendaf@bikeboneyard.com
Subject: Honda CB 100s

Hello Bren, do you still have a left side cover for the 1971 CB 100?
I have purchased several other parts from you in the past and have been
very happy with your parts and prices.
I am also a fellow supporter of
Mark's vmx site. I pay with cash or postal money order. I also have some
very nice RM 370 A parts I would trade. Please let me know if you can
help with the side cover.Thank you for all the help!
David H.


From: ildert troost
Sent: Tuesday, February 19, 2008 2:36 PM
To: 'bikeboneyard'
Subject: RE: 5speed honda gearbox

Got it, looks nice!
Thanks
ildert


-----Original Message-----
From: Greg Bakan
Sent: Saturday, February 09, 2008 7:45 AM
To: brendaf@montana.com
Subject: RE: at1 parts

Hi:
Just a quick email to thank you for the excellent parts. They arrived in
great condition and were exactly as described. Really appreciate your help.
Was having difficulty finding the parts I needed, but you had then and they
were very high quality. Will definitely recommend your company to others.
Thanks again!


Greg


From: chris jackman
Sent: Wednesday, February 06, 2008 3:25 PM
To: brendaf@bikeboneyard.com
Subject: parts arrival

Got the triple parts today in great shape,pleasure doing business with you.Will deal again!!

Thanks,
Chris Jackman


From: Jill Marion
Sent: Wednesday, February 06, 2008 2:53 PM
To: brendaf@bikeboneyard.com
Subject: 1986 kdx 200 shock

I got my rear shock today on 2/6/08.thank you looks great can not wait to put it on and ride.Hope to buy more great parts from you. thank you
john


From: Mike Cantrall
Sent: Monday, February 04, 2008 3:42 PM
To: brendaf@bikeboneyard.com
Subject: received parts


I received the kickstarter that I ordered from you today and was pleasantly suprised to find a part that could pass for new. I will be needing more parts to complete the restoration of my IT 175 and you will be at the top of the list for parts.
Thanks,
Mike Cantrall


From: Richard Trail
Sent: Thursday, January 31, 2008 8:53 PM
To: bikeboneyard
Subject: Re: Credit for prepayment and returned shocks

Bren,

I received the exhaust pipe and it cleaned up very well thanks.

I still need the left hand inner pipe. Any luck. If not I plan to buy new on Monday.

You have been a big help and I appreciate it.
I will send you a picture when it is painted and the pipes are on.

Rich Trail


From: grahamds
Sent: Thursday, January 31, 2008 2:50 PM
To: brendaf@montana.com
Subject: Re: 82 gpz550 swingarm

Hey Bren!

Just want to thank you for a great swingarm. This part was so hard to find and @ such a great price! Got any tires for sale? 120/80/18 rear or 130/80/18 rear. My front tire is 100/90/19.

Thanks again, Daryl.


From: Mal Hunter
Sent: Thursday, January 31, 2008 4:18 AM
To: bikeboneyard
Subject: RE: Bultaco-167 rear wheel

Well Bren, The wheel arrived today , fantastic, really really good, better than expected, I'm very happy ,the rim is perfect ,the braking surface is perfect ,the floating part is perfect ,these 3 parts, rim, braking surface, floating section were shot on my one,so its unbelievable that you could have something thats so hard to come by in such good condition ,residing at your place on the other side of the planet ,you are an instant legend ,thanks heaps .......Mal..ps it even still has the yellow Akront sticker, unreal !


From: Edward Reidy
Sent: Tuesday, January 22, 2008 8:06 AM
To: brendaf@montana.com
Subject: Parts Arrived

Thank you, the parts arrived yesterday everything looks good.
Looking forward at doing more business with you in the future.


Ed Reidy


From: Richard Herdman
Sent: Monday, January 21, 2008 7:39 PM
To: bikeboneyard
Subject: RE: 1980 KLX250 tank

Tank recieved . bootifil . thankie so much ...Rick @ westside cycles. thatsa $550 tank fer me. U guys are A #1 supplier for salvage parts for me. Thanks again. yer good peeples..... sorry...gotsta play up the hillbilly thang.


From: vecchio27
Sent: Monday, January 14, 2008 5:22 PM
To: brendaf@montana.com
Subject: RE: RM125

yes i am pretty sure the 1978-1981 pe 175 motor will throw right in the rm125 frame (1980). It is a pe 175 motor right, also what kind of condition and hopefully we can make a deal this is my 3rd time going through you and your parts are always decent thanks randy!


From: Bruce Bodell
Sent: Sunday, December 23, 2007 6:21 PM
To: brendaf@bikeboneyard.com
Subject: Honda part

I have bought things from you before and you have came thru with hard to find parts. I need a carb slide for a 1972 honda trail 70. Do you have one>let me know ‘
Thanks Bruce


From: Richard Beard
Sent: Saturday, December 22, 2007 10:47 AM
To: brendaf@bikeboneyard.com
Subject: Got the CR480

Hey Bren,
The CR480 made it here Fri, it's in good shape considering it's age the frame shows some landing damage and the clutch cover has been repaired not too hard to fix, it looks like this bike was rode hard all it's life as they should be. as you said the pipe is damaged but might be fixed and silencer is a total write off, it should take me awhile to get this one back on the dirt. Thanks again for the great bikes and parts the BoneYard is now is the best source for vintage dirt bikes and parts I have and I will continue to do business with you.
Thanks again
Rick


From: Robert Walton
Sent: Thursday, December 20, 2007 11:01 PM
To: bikeboneyard
Subject: RE: Honda CB exhaust

Thank you! I have to say, I'm pretty happy with the headers, this bike sounds INCREDIBLE with them on it.


From: Fred Robins
Sent: Tuesday, December 18, 2007 7:07 AM
To: brendaf@bikeboneyard.com
Cc: kenneth hult
Subject: Yamaha MX175B - Enquiry Australia ( Fred Robins )
Hello Bren ,
A guy named Kenneth Hult in the Philippines told me about your Web Site , and that you had some great bikes , you sure do .
I collect and race Vintage Yamaha Dirt Bikes here in Australia , and you have a few bikes that interest me .
Your complete MX175B at $400 sounds good , and the DT1MX also , to name a few .
Can you tell me have you shipped Bikes like these to Australia and if so , is it easy enough for you to do so .
If so great then I would love to hear fromyou , if its difficult I understand , just drop me a short note when you get some time .

Great Web Site too !
Thanks and Regards Fred Robins


From: kdebolt
Sent: Tuesday, December 18, 2007 7:02 AM
To: brendaf@bikeboneyard.com
Subject: mt125 carb

got it yesterday looks good Thanks Ken


From: Hagerty, Shawn
Sent: Wednesday, December 12, 2007 11:00 AM
To: brendaf@bikeboneyard.com
Subject: GPZ parts

Hello,

I ordered some parts for a GPz recently, and the worked great, thanks. I am interested in some more.
Are the front calipers still available off of your 1982 GPz 750? If so are they in good working condition?
Please let me know, thanks.

Shawn Hagerty


From: Dave Moss
Sent: Monday, December 10, 2007 3:13 PM
To: bikeboneyard
Subject: rad valve

hello,

recieved the part today and is now running in the bike. thanks again for the awesome deal. will post positive feedback.

Regards,
Dave


From: Richard Beard
Sent: Friday, November 30, 2007 8:38 PM
To: bikeboneyard
Subject: Re: bikes n stuff

Hey Bren,
Received all parts, good bikes and parts thanks again.
Also I'm always looking out for complete bikes (or mostly complete) from the late 70's through the 80's and 90's from any makes and models but preferably 350cc to 650cc four stroke singles and open class 370cc to 500cc two stroke bikes, if you get anything you think I might be interested in drop me a line I most likely will be. Thanks Again
Rick B


-----Original Message-----
From: Paul Kalapos
Sent: Monday, November 26, 2007 9:22 PM
To: bikeboneyard
Subject: RE: Magnum MK II

Hi:
I got some parts from you before and they were fine. Google found your ad for the Magnum again. I would buy the whole engine from you. I for sure need the clutch side aluminum casting. But also has need for other parts. I did not understand your reply.
Regards,
Paul


-----Original Message-----
From: slowbird@earthlink.net
Sent: Wednesday, November 21, 2007 10:05 AM
To: brendaf@bikeboneyard.comv
Subject: RE: yamaha ht1 90

thanks much b, all in fun....you've got a great operation there
yourself...plus you are located in an awesome area....hopefully me too
someday soon...take care

jeff


From: Ken Faro
Sent: Monday, November 19, 2007 11:45 AM
To: brendaf@bikeboneyard.com
Subject: CR125

Thanks again for the bitchin’ bike!....painted the frame black,added a spark arrestor( remember I’m in Cali),rebuilt the rear shocks and added a
IRC front tire,took 2 first place finishes yesterday,that this is a rocket and runs great,Thanks



From: tiffany webb
Sent: Saturday, November 17, 2007 10:28 PM
To: bikeboneyard
Subject: Re: 1985 honda big red 250 es


you kick ass!!! got my carb in record time, you are the best and its in better condition then i expected, thanks a million, ill thank ya again when i get it all up and going but you made my thanksgiving!!!!


From: Robert McBride
Sent: Saturday, November 17, 2007 12:15 PM
To: bikeboneyard
Subject: Re: 81 xr500r parts

Brenda.......WOW you guys are good!!!!!! glad I found you,,,,THANKS Bob


From: larry green
Sent: Friday, November 16, 2007 9:34 AM
To: bikeboneyard;
Subject: RE: coils

Rick,

Can you pay for this with your paypal account -I think you have one, right?- and cancel the ebay bid for the other coils? I prefer to go with Bren at Boneyard than throwin' the dice on ebay.

The total is $59 -50 for coils and 9 for shipping. I'll send you a check today if you send me your address -again.

Bren, thanks again for stayin on this. It'd be nice to get these before TG -but you knew that already....

Let me know if anything doesn't pass the smell test


From: Rich Danek
Sent: Saturday, November 10, 2007 8:18 AM
To: bikeboneyard
Subject: RE: 86 foreman 350

Thanks Brenda you are the best !!!!


----- Original Message -----
From: philandtracie
To: brenda
Sent: Monday, October 29, 2007 8:46 AM
Subject: parts
Bren you have come through for me before so I hope you can again. I need the following parts for a 1974 DT 360.

#1 Both fenders
#2 A speedo
#3 A left side handle bar switch ( the one with the headlight and horn etc. buttons on)
#4 A complete set of turn signals front and back ( with all the mounting brackets)
Please email me back with the cost and if you have them also how much for shipping. And I will send you a money order for everything. I'll be waiting to here from you. Thanks Much
Phil Boyer


----- Original Message -----
From: charles legacy
To: brendaf@bikeboneyard.com
Sent: Monday, October 22, 2007 3:05 PM
Subject: cr 500
v

Hey Brenda Just want to start by saying thank for the trans gears , they worked great .
Now looking for a runable carb , throttle cables and
throttle side rad wing(black) PRICES
For a 1985 CR 500


----- Original Message -----
From: dustin seymour
To: brendaf@bikeboneyard.com
Sent: Monday, October 15, 2007 7:59 PM
Subject: 83 550 night hawk


hi, i have an 83 550 night hawk and i need the stator, i seen you have one listed, but i was wandering the difference between the stator and the alternator? and how much is shipping for the stator?, by the way i bought a side cover for a cb400 super sport last month, wonderful peice, very pleased, thank you for such good customer service, also just curious, does the stator have a warr? thanks again,

dustin


----- Original Message -----
From: Ryan Penner
To: brendaf@bikeboneyard.com
Sent: Monday, October 15, 2007 3:52 PM
Subject: cr500 parts


thanks that would be awsome and again thanks for the awsome service


----- Original Message -----
From: Bill Vanvelzer
To: bikeboneyard
Sent: Monday, October 15, 2007 12:11 PM
Subject: RE: DT250 Gas Tank


Thanks for getting back to me so quickly, Brenda--now, that's customer service! So how's the tank? Rust on the inside? Dents? Does it have the petcock? How much would postage be to 24175?
Thanks again,
Bill


----- Original Message -----
From: crxracer11
To: bikeboneyard
Sent: Friday, October 12, 2007 9:29 AM
Subject: Re: yamaha yz490 kickerstarter


Hey i just wanted to say thank`s,i received the kick starter today,great shape.i found your site via the vintagefactory website fyi.....thank`s again Jeff T


----- Original Message -----
From: Greg Kingen
To: brendaf@bikeboneyard.com
Sent: Tuesday, October 09, 2007 3:09 PM
Subject: 1979 Yamaha XS 1100 Special


I purchased a great set of carbs from you for my bike, and now I need one more item. It is the fuel delivery system. Some people call it the octopus, or spider. Mine is shot and I am looking for a good one. Do you have one?

Gregory M. Kingen


----- Original Message -----
From: "Andre Bennett"
To: brendaf@montana.com
Sent: Monday, October 08, 2007 1:11 AM
Subject: Received ct3 parts!


> Thanks for the parts and great service! They work great. If I ever need
> parts again I know where to look
.
>
>
> Andre Bennett


----- Original Message -----
From: Nico van der Burg
To: brendaf@bikeboneyard.com
Sent: Saturday, October 06, 2007 11:22 AM
Subject: Honda parts


Hello,

In the past I allready bought some parts from Bikeboneyard (I'am a happy customer) I would like to buy now:
a ' 77 XL-125 camshaft and a ' 76 XL-175 carb. About the carb: is this the 26 Keihin with a "collar" at cil.side?
If so can you calculate the total amount (incl. shipp.) for shipping to the Netherlands? I would like to pay in advance
by Paypal?

Thank you,
Nico van der Burg
Holland


----- Original Message -----
From: Cortnie Loving
To: brendaf@bikeboneyard.com
Sent: Tuesday, October 02, 2007 7:20 PM
Subject: 1978 honda XL125


Hey Bren,

I was just wondering if you happened to have an alternator assembly for 1978 honda xl 125? I purchased a head and valves from you and they worked great. i am still trying to get this bike done so I can ride it. Thanks! Jon garrison


----- Original Message -----
From: "Brad van Barrelo"
To: brendaf@bikeboneyard.com
Sent: Sunday, September 23, 2007 5:36 AM
Subject: maico parts


> Hi mate, Brad here from Australia here. > Just wanting to know if your list of Maico parts is up > to date?If not , can you send me current list? Will > you ship to me in oz? I found your site via a forum > member on who said he had good dealings with > you. Cheers,Brad
>

----- Original Message -----
From: "aaron tenold"
To:brendaf@bikeboneyard.com
Sent: Wednesday, September 19, 2007 9:14 AM


> Hi I recently bought a carburetor for a 200es big red and it works great
> thanks alot.
I was wondering if you knew of any decent 1984 or 1985 big reds
> for sale in your area. Any info you could give me would be greatly
> appreciated. Thanks again Aaron
>


----- Original Message -----
From: "Jason Lemon"
To: brendaf@bikeboneyard.com
Sent: Thursday, September 13, 2007 9:10 AM
Subject: hey I need some parts 84 CR 500


>I bought some KL parts from you about 6 months ago.
> Thank you for everything.
I need the bracket that
> holds the front caliper to the forks for my 1984
> CR500. you have that?


----- Original Message -----
From: Mark Baum
To: bikeboneyard
Sent: Friday, September 07, 2007 11:18 AM
Subject: Re: 75 Husky cr 250


Understand. I'll keep checking back from time to time. A little background on me. Have loved kow triples since I was a kid. I have an S1, S2, H1 and H2 and looking for 400 to round out the family. Made my son promise to keep them in the family. Husky was another bike I wanted as a kid but used Yamaha DTs seemed all I could afford.
Thanks for being in the business you're in. Its helps us mid lifers keep the bikes we have alive and running.
Thanks again.


----- Original Message -----
From: mikegeil
To: brendaf@montana.com
Sent: Thursday, September 06, 2007 2:14 PM
Subject: Seat for Honda CL160


>
> Got the seat today. Just what I wanted. Thank you very much.
> Mike Geil
>

From: Edmond Epiter
To: 'bikeboneyard'
Sent: Monday, September 03, 2007 12:55 PM
Subject: RE: 86 yz125 piston


Hi, I have receive the piston today thanks for the fast shipping.

Have a nice day

Edmond


From: "bikeboneyard"
>>>>>To: "L. David Weitz"
>>>>>Subject: Re: 1971 T25T Triumph (250 Trail)
>>>>>Date: 1 sep 2007 12:04:20 -0600

Have recieved the side covers and speedometer for my 1971 Triumph. Parts fit the bill. Very satisfied, thanks! I'm still lneed the Speedometer gearbox and speedometer drive ring, both located on the rear axel (under the muffler) and the air box. Do you still have these items.

Thanks again

Dave
>>>>

----- Original Message -----
From: Tackett, Charles R.
To: brendaf@montana.com
Sent: Tuesday, August 28, 2007 7:31 AM
Subject: Parts

You never fail! Have bought a hand full of parts of you over the past few years, so when I needed something I couldn’t locate, I searched your site. Low and behold you got some of what I need listed!!! Do you still have the starter for the 87 Yamaha SRX-250 that is still listed?? Also for my son…..still got the handlebar switches and the pedal/crank assembly for the puch moped?? Thanks for checking. Charlie


----- Original Message -----
From: Fishon6030
To: brendaf@bikeboneyard.com
Sent: Wednesday, August 15, 2007 1:16 PM
Subject: hey


i got that rearwheel you sent me thanks
nice doing business with you.



----- Original Message -----
From: Alex vL
To: brendaf@montana.com
Sent: Saturday, August 11, 2007 12:24 PM
Subject: cb 500t Fuel tank
Dear Brenda,
I got the fuel tank and the kicker, thanks. I got the lock on the tank to open but I was wondering if you've got a key for it? The parts are excellent.

Kindest regards,

Alex.


----- Original Message -----
From: Rod Gilchrist
To: brendaf@bikeboneyard.com
Sent: Saturday, August 11, 2007 6:19 AM
Subject: More bike parts.
Hi Brenda,
First , thankyou for getting that Can-am tank to me so fast mate, great service!

What I need now is a Kick lever for my 1978 Honda CR250R. I see you have one listed. Also I would like to put an Alloy swingarm from a Can-am MX6-B on

My MX-6. Do you happen to have one?

If you could email me with the costs including shipping to Australia, that would be great.

Al lthe best


----- Original Message -----
From: Robert Johnson v
To: bikeboneyard
Sent: Thursday, August 09, 2007 6:08
Subject: Re: I need some '74 CB 750 parts! GOT 'EM, THANKS!
Thanks Brenda,

The parts arrived yesterday and everything looks in order!
I'll be back to your site for sure.

Bob


----- Original Message -----
From: Roberta Meyer
To: bikeboneyard
Sent: Wednesday, August 01, 2007 1:39 PM
Subject: Re: Notification of a Pending eCheck Payment


Just a note to let you know we received the headers, they are on our bike and working great. Thanks, Roberta


----- Original Message -----
From: Haf443time
To: ""bikeboneyard""
Sent: Tuesday, July 31, 2007 7:52 AM
Subject: Re: Shipment Notice: A package has been shipped to you


> Thanks, I receieved the package and put the part on last night and drove it this morning! > Thanks, your'e service will be reccomended to all my friends!
> John


From: chris jackman
To: brendaf@bikeboneyard.com
Sent: Saturday, July 28, 2007 8:27 PM
Subject: tank


hi was just wondering if you had a gas tank for a 1984 honda cb nighthawk 700 in good shape. Mine is trhe blue paint skeem.

p.s. the r5c i bought from you is now completely restored. have put over a 1000 trouble free miles on her. thanks for a good bike and all your honesty.
chris


----- Original Message -----
From: Geoff Kole
To: bikeboneyard
Sent: Friday, July 27, 2007 4:41 AM
Subject: Re: 1982GS 750 Suzuki set of carbs(4)


Brenda,
The Carbs you sent me work very well, thank you so much! Being a Professional Comedian having my bike working again makes it easy to get around New York City again! Thank you!!!

Best Regards,
Geoff Kole
www.geoffkole.com


----- Original Message -----
From: Decordel
To: bikeboneyard
Sent: Tuesday, July 24, 2007 12:48 PM
Subject: Re: husky parts and klx arm


Hi Brenda,
i will be out of Italy in August and please to ship the cover at my father.


I thank for all you did in the circustance,being happy having known as a honest seller and very disposable.
Thanks again.
Marco


----- Original Message -----
From: "Kenneth Pedersen"
To:brendaf@bikeboneyard.com
Sent: Tuesday, July 24, 2007 5:34 AM
Subject: 72 Yamaha AT-1 parts


> Hi, Brenda. Last summer I got a coil from you for my bike. It works great. Now I need the following:
>
> Rubber strap for back of gas tank.
> Brake light switch
> Rubber donut that goes on front side of tank to slide into frame
> 20 amp fuse
> 12N9-4B-1 battery
>
> Could you please see if any of these items are available and shoot me a price?
>
> Thank you.
> Ken Pedersen


----- Original Message -----
From: Buraczynski, James
To: 'bikeboneyard'
Sent: Wednesday, July 25, 2007 5:33 AM
Subject: Much thanks for the MX100 wheel

Bikeboneyard (Brenda)
I just wanted to thank you for the Yamaha MX100 wheel. I received it yesterday.
I was very pleased with the item and wanted to say what a good deal.
I wish you the best of luck and will always keep you in mind if I or any of my friends need any cycle parts.


Thanks again.

JIM BURACZYNSKI


----- Original Message -----
From: Darlene Taylor
To: brendaf@bikeboneyard.com
Sent: Wednesday, July 25, 2007 2:15 PM
Subject: Radiator - 85 Honda Shadow 500


You guys just recently helped me with a hard-to-find part. It was a real pleasure dealing with you. So, I'm hoping you'll have the next thing I'm looking for. A working radiator for a 1985 (500cc) Honda Shadow. Let me know. THANKS


Gargoyle Customs, Inc.


----- Original Message -----
From: Mark Rasmussen
To: bikeboneyard
Sent: Thursday, July 26, 2007 8:25 AM
Subject: xr200 forks


Finished installing the forks last night. Thanks for getting me back on the trails

Thanks,
Mark R.v


----- Original Message -----
From: f.rencurel
To: "brendaf"
Sent: Thursday, July 19, 2007 3:15 AM
Subject: Re: CanAm 400 parts


> > Thank you for your quick reply.
> > cases are in good shape? no cracks ? if yes could you please send me your paypal invoice and I will buy it.
>
> I trust you since you have a pretty good record in MX vintage forum.
>
>
> buy the way I am loking for a 485cc rotax engine fitted on 500 CanAm in 1984 if you heard about it please contact me.
>
> regards
> > Franck


----- Original Message -----
From: Shane Bettis
To: bikeboneyard
Sent: Monday, July 16, 2007 11:47 AM
Subject: Thanks


I received the gas tank for the km100 and I love it Just wanted to tell you all at the boneyard YOURE THE BEST!!!!
Thanks Shane


----- Original Message -----
From: Happy Gilmore
To: bikeboneyard
Sent: Thursday, July 12, 2007 9:51 PM
Subject: RE: Vetter Fairing


The fairing arrived today (Thursday, July 12). I want to thank you for the business and I'll be sure to check back with your website if I need anything else.

Thanks,
Shawn


----- Original Message -----
From: Walberg Boys
To: bikeboneyard
Sent: Thursday, July 12, 2007 12:44 PM
Subject: Re: Bob Walberg has just sent you $31.00 USD with PayPal


Got the coil. works pertectly thanks man,,, bob


----- Original Message ----- From: PTRYLREDNECK3
To: brendaf@montana.com
Sent: Tuesday, July 10, 2007 7:53 AM
Subject: Re: CR 500 Carb.


Hey, got the carb. and it worked out great, thanks for your GOOD service's.Will be doing more business with you in the future.
Thank's,
Steve Fox


----- Original Message -----
From: Rose, Antwan
To: brendaf@bikeboneyard.com
Sent: Monday, July 09, 2007 9:05 AM
Subject: Looking for a 1981 YZ250


Hello Brenda,



I bought a carb for a 95 CR250 from you and it works great. Well that project is now done and I am starting another one. I am looking for a 1981 YZ250 if you have any leads on one could you please pass it along.

Thanks so much
Antwan Rose


----- Original Message -----
From: andrew james
To: bikeboneyard
Sent: Friday, July 06, 2007 9:41 AMv
Subject: Re:


Brenda,
Received the TM cylinder head , looks good. Look forward to doing business with you again.

Thanks
Andrew


----- Original Message -----
From: Cliff
To: brendaf@montana.com
Sent: Monday, July 02, 2007 6:28 PM
Subject: Left Side Cover and headlight mounting bracket needed...


I received the alternator cover, thanks for being real. I need a couple more item to complete my project. The subject line contains the needs and the bike is a 1974 Honda CB 750 k4.
please advise...

--

----- Original Message -----
From: Sarah Vail
To: bikeboneyard
Sent: Saturday, June 30, 2007 11:35 PM
Subject: Re: 1972 Hona CB500Four front brake master cylinder


That's great man! Thanks! E-mail back the invoice and I'm all over it. Lets's get it ASAP. You're the shit!!!! I love ya.

Sarah Vail


----- Original Message -----
From: Steve Mandic
To: brendaf@bikeboneyard.com
Sent: Sunday, June 24, 2007 1:53 PM
Subject: rt 180

brenda,
I bought a kicker arm for a rt 180 from you a few months back, it works great. Now I need a front and rear sprocket and chain asap if you can come up with onee. e mail me a price for each if you have them.

thanks steve


----- Original Message -----
From: "Ben Earthey"
To: brendaf@bikeboneyard.com
Sent: Thursday, June 21, 2007 11:48 AM
Subject: xs750se parts


>i have got in contact with you as I have heard good reports about you
> I have got a 1982 xs 750 se yamaha and i need to find some parts
>
> would you have
>
> a tank (pref black)
> a seat (metal base)
> exhaust (good condition)
> rear and front fenders (chrome)
> sissy/grab rail (chrome)
> chrome airbox inserts for side's
>
> I would also need to ship them to england uk
>
> hope to here from you soon
>
> ben
> thanx


----- Original Message -----
From: SAXSTONE1
To: brendaf@bikeboneyard.com
Sent: Tuesday, June 19, 2007 3:57 PM
Subject: XS1100 Back Rest


Brenda,
I received the back rest today, thanks man!


----- Original Message -----
From: "Saxon Holbrook"
To: brendaf@bikeboneyard.com
Sent: Tuesday, June 19, 2007 3:31 PM
Subject: running cycle
> Hi Brendad,
>
> Marvin Paulson sent me your contact information because he bought an ATV
> from you and was really satisfied.

>
> I'm semi-passively looking for a commuter cycle. I've previously owen two
> Honda Sabres ('83 V45?, '85 VF700) and was quite pleased with them. One met
> an early end when I left a firend test drive it (he was okay and lesson
> learned) and the other I sold to make a down payment on my house.
>
> Anyway, I'm looking for a comparable ride in good enough shape to be safe
> and reasonable fuel efficient for my 10 mile commute to work.
>
> Marvin thought you might have something like that around your shop.
>
> Please let me know.
>
> Thanks for your time,

>

From: Wendy Weiss
To: bikeboneyard
Sent: Friday, June 15, 2007 8:28 AM
Subject: Re: 79 xr250


Brenden,
Received parts yesterday. Everything looks good.

Thanks again,
Scott


----- Original Message -----
From: nstringer
To: bikeboneyard
Sent: Tuesday, June 12, 2007 2:33 PM
Subject: Hercules side panels


note: Please ship me your two Hercules side panels, and thanks for offering them.


Phil

P.S. Andy Lippert says you're a swell guy to do business with. Thanks for earning a good reputation!



----- Original Message -----
From: Arvid Nernes
To: brendaf@bikeboneyard.com
Sent: Friday, June 08, 2007 9:09 AM
Subject: DT 175


Hei

I Just want you to know that the package with sylinder and carb arrived today and
in perfect condition, i`m very satisfied with the parts, Thank you once again


Regards

Arvid Nernes


----- Original Message -----
From: fraser
To: bikeboneyard
Sent: Monday, June 11, 2007 10:34 AM
Subject: Re: xl185 ign advancer mechanism


Hi Brenda,

Just to let you know that the part arrived on Friday and it fit like a glove. Thanks so much, I'm back up and running!

Fraser


----- Original Message -----
From: ernst otero
To: brendaf@montana.com
Sent: Thursday, June 07, 2007 10:56 PM
Subject: Received frame/bottom end - thanks!


Hey Brenda -
Thank you for getting these items out so quickly. Much appreciated!
Still need the airbox if it's still around. Also, do you have a swingarm pivot bolt available for this frame?
Thanks!
C.


----- Original Message -----
From: GORDON+ANTONIA NORRIS
To: brendaf
Sent: Monday, June 04, 2007 8:11 PM
Subject: hodaka maico


I received the side cover,looks great! also I just sent another 10 bucks for shipping the wheel, thanx gordon norris


----- Original Message -----
From: dsskghsk edirh
To: brendaf@montana.com
Sent: Thursday, May 31, 2007 2:37 PM
Subject: 79 kawasaki kz400 ltd


hey brenda, justin in omaha. Got the carbs and they look good. I just came across a broken throttle cable. It's the cable closest to you if you are sitting on the bike. It hooks to the back side of the throttle assembly on the carburetor. If you can send an invoice that would be great .
thanks
justin


----- Original Message -----
From: Dan007robertsjr
To: brendaf@bikeboneyard.com
Sent: Monday, May 28, 2007 1:11 PM
Subject: (no subject)


THANKS FOR THE HEAD AND PISTON I GOT FROM YOU IT WORKED OUT GREAT. DO YOU HAVE A BRAKE LIGHT AND TURN SINGLES FOR THAT BIKE 1975 CAN AM TNT ? THANKS DAN


----- Original Message ----- From: Num1bushwacker
To: brendaf@bikeboneyard.com
Sent: Wednesday, May 23, 2007 9:34 PM
Subject: 1974 h2 Left side cover


Thanks Brenda,side cover looks great,will be doing business again AndrewH Homestead FL


----- Original Message -----
From: JRealTime
To: brendaf@bikeboneyard.com
Sent: Wednesday, May 16, 2007 12:48 PM
Subject: I wanna buy a Kicker Lever!


Hello Brenda,
I want to buy the Kickstarter lever for the 76 TS 250.
kicker--$25,
Do you still have it?
The Low End you shipped me for the 79 TS250 arrived monday and looks good!

Thanks,

Jim Hart


----- Original Message -----
From: pete broadhurst
To: brendaf@bikeboneyard.com
Sent: Thursday, May 17, 2007 3:39 PM
Subject: kt250 forks


hi the forks turned up today i must say thay were well worth the wait just as your description in your email thanks very much pete uk. ps i have a large collection of vintage trials and motocross bikes that i am rebuilding will be in touch for more 1st class parts


----- Original Message -----
From: jake5490@comcast.net
To: brendaf@bikeboneyard.com
Sent: Friday, May 11, 2007 8:14 AM
Subject: 78 YZ 250 Head pipe


I believe you have one for 50 dollars how much total to ship to 46323
I have got parts from you before rather quickly and I appreciate that thanks..

Jake,


----- Original Message -----
From: Reimbold, Jim
To: brendaf@bikeboneyard.com
Sent: Thursday, May 10, 2007 11:18 AM
Subject: 89 KX 125


Brenda,
Do you still have the kick start lever for the 1989 KX 125 Kawasaki? If so what condition is it in? Can I pay the $25.00 for it thru Papal or a credit card?

The Yamaha IT tank I bought from you last year is still working great.
Thanks,
Jim


----- Original Message -----
From: Andrew Smith
To: bikeboneyard
Sent: Wednesday, May 09, 2007 12:49 PM
Subject: Re: marzocchi enquiry
Hi Brenda

Forks arrived today - in great condition, too. Very pleased..!

thanks for your help
cheers
Andy


----- Original Message ----- From: "R A"
To: brendaf@bikeboneyard.com
Sent: Tuesday, May 08, 2007 10:05 PM
Subject: TS 400 frame and swingarm


> Do you still have these items? Would you happen to
> have the title for this bike?
> Thanks, Rob
> ps
> The TS 185 tank I got from you a few months ago worked
> out great!

> Thanks again, Rob
>

----- Original Message ----- From: "Matt Daly"
To: "bikeboneyard"
Sent: Monday, May 07, 2007 8:39 PM
Subject: Re: Shipment Notice: A package has been shipped to you


> brenda, I recieved the package today. the part looks to be in excellent
> condition. thanks much for your patience and professional services.I am
> sure to be using your service in future projects,matt daly
.
>

----- Original Message -----
From: M Moody
To: bikeboneyard
Sent: Saturday, May 05, 2007 11:48 AM
Subject: Re: TW parts


Received axle today.......thanks for the prompt service. Mike


----- Original Message
From: gos
To: brendaf@bikeboneyard.com
Sent: Friday, May 04, 2007 3:39 PM
Subject: 91 rm 125


Brenda, we have done buisness in the past. Thank you for promt service and quality parts.

I am now looking for a good cdi for my 91 rm125. Having a very hard time finding a known good one.

Thanks for your time,

Travis Brodie


----- Original Message -----
From: iwanna eater
To: bikeboneyard
Sent: Wednesday, May 02, 2007 10:18 PM
Subject: Re: 83' yamaha i t 250


Thanks for the part it arrived quick and worked out great, I just got back from ridding.

Thankyou,
Brandon


----- Original Message -----
From: "D Stone"
To: brendaf@montana.com
Sent: Wednesday, May 02, 2007 4:57 PM
Subject: Re: 85 RM 250


> awesome service... it would still mean alot if you kept an eye open for a > side panel(same bike, left hand side), i know its a small part but it would > mean alot, i plan on sending all my business your way, and have already > recommended you! > Thanks so much,
> Dan


----- Original Message -----
From: Radhtg
To: brendaf@montana.com
Sent: Tuesday, May 01, 2007 11:54 AM
Subject: Re: Part order


Just got it - looks very good! Will call as I get further into this bike for any other items you may have.
Paul


----- Original Message -----
From: "DOUG WADE"
To: brendaf@bikeboneyard.com
Sent: Monday, April 30, 2007 11:19 AM
Subject: Boots
> Brenda
>
> I received my boots from you this morning. I wanted to
> thank you for them. They are great. You were very easy
> to work with. I would encourage anyone to deal with
> you. God Bless.

>
> Doug Wade
> Lavergne Tn


----- Original Message -----
From: "Larry Green"
To: brendaf@bikeboneyard.com
Sent: Tuesday, April 24, 2007 12:02 PM
Subject: Order Follow-up


> Brenda,
>
> Got the order from you just yesterday -the points cover and handle grip for the 750 Honda.
> > Thank you very much for the fast turn around, reasonable prices, etc. I passed your name to some others in the Classic Japanese Motorcycle Club, informing them that you seemed to have a lot of good stuff!
> > Thanks!

> L


----- Original Message -----
From: Don McGregor /
To: brendaf@bikeboneyard.com
Sent: Monday, April 23, 2007 11:57 AM
Subject: YAMAHA PARTS NEEDED ASAP
Brenda,
I have purchased from you before and always had great luck so I thought of checking w/ you first for my current requirements. I need a petcock from and RD350, 1973 -1975, A DS7 petcock will also work. I also need a good used front master cylinder from the same bike Can you help?

Regards,
Don McGregor


----- Original Message -----
From: Jerauld Tassin
To: brendaf@bikeboneyard.com
Sent: Friday, April 20, 2007 11:58 AM
Subject: Suzuki ts 250 Blue


Hey Brenda:

First I want to thank you for your great service. Last year I bought the engine from the Suzuki ts 250 1971 model you have listed and installed it and it worked just fine. Do you still have the petcock for the fuel tank? If so how much? Mine started to leak around the lever.

Thanks
Jerry Tassin


----- Original Message -----
From: Brian Larsen
To: bikeboneyard
Sent: Wednesday, April 18, 2007 8:39 PM
Subject: Re: 1977 Suzuki Gas Tank


Brenda,

I received the Suzuki tank today, just as described. Thanks,
Brian


----- Original Message -----
From: Juan M. Ramos
To: brendaf@bikeboneyard.com
Sent: Tuesday, April 10, 2007 8:49 PM
Subject: Thanks.


Hello Brenda, just to say thanks for the SL 70 receipt for title purpose. In appreciation for your help, what size Tee-shirt do you wear? thanks Juan Ramos


----- Original Message -----
From: John Husted
To: 'bikeboneyard'
Sent: Sunday, April 08, 2007 9:03 PM
Subject: RE: 1975 Ossa Super Pioneer Headlight and Ears
Brenda,
My brother received the headlight and ears.
Thanks for the transaction!
John Husted


----- Original Message -----
From: Juan M. Ramos
To: brendaf@bikeboneyard.com
Sent: Monday, April 02, 2007 7:58 PM
Subject: Honda SL 70


Hello Brendan, how are you? Just to thank you for the 1973 Honda SL 70K1 that I received from you last week. Can you please mail me a receipt for it, in order that I can start process to obtain a Title for it. Once again thanks for helping me get my dream bike from when I was twelve years old.


----- Original Message -----
From: Cody
To: brendanf@bikeboneyard.com
Sent: Monday, April 02, 2007 6:54 PM
Subject: thank you


I just received my TS-90 carb cover today and It works great and completes the bike. I would just like to thank you for your time and low prices. You have a great website. I will be back soon, cause I know im going to need parts.


----- Original Message -----
From: Bill Henry
To: bikeboneyard
Sent: Monday, April 02, 2007 11:40 AM
Subject: Re: 93' vulcan


Thanks Brendan,got the wiring harness today,that was fast.Your a good man and will being doing more bussiness with you real soon,Bill


----- Original Message -----
From: "** ****"
To: brendanf@bikeboneyard.com
Sent: Sunday, April 01, 2007 10:30 AM
Subject: bultaco MK6


> Hi Brendan,
> Thank you very much for foot pegs...I was happy to get those ones!!!
> I am working with the bike and need some parts.
> I need :
> 1. Stem nut (see the
> 2. Stoppers for steering head.
> Do you have rubber boot for air filter? I need it.
> You have my credit card on file..so charge it for parts and shipping.
> I'll send you a picture of my dad on BMW in 1945.
> Thank you,
> Arthur


----- Original Message -----
From: gpo356
To: brendanf@bikeboneyard.com
Sent: Saturday, March 31, 2007 10:59 AM
Subject: Pay pal


I'll do pay pal,.. give me instructions your ID so $250.00,.. thats more than i paid for the bike! But I'm real happy you have what i need thanks!! You do a real nice job on your web site! I like it and your real fai on prices.. do you have a 69 mach-1 500? ..I want one.. john


----- Original Message -----
From: "Johnny Hough"
To: "bikeboneyard"
Sent: Saturday, March 31, 2007 10:55 AM
Subject: Re: Hey


> Thanks man. U awesome.
> --toughsoul


----- Original Message -----
From: CLIFTON ADOLPH
To: brendanf@montana.com
Sent: Tuesday, March 27, 2007 6:44 PM
Subject: Re: Husky 250 cr
Thank man, yes I put brand new meats on it and cleaned it up man its a really awsome bike and it flys...thank you so much I am very happy with it and still looking for that 1973-74 honda CR 250 elsinore...here;s a pic of the bike it tears up the cane field roads and I yet to race against my 2005 YZ 250.

take care
Cliff


----- Original Message -----
From: David Holling
To: bikeboneyard
Sent: Tuesday, March 27, 2007 11:53 AM
Subject: Air Box


Hi Brendan,
The air box arrived today, thank you very much great service.
Do you have anything else for an M219/220? Looking for a kick start & gear shift levers.
Hope to do business again.
Kind regards
David.


----- Original Message -----
From: PHILIP ICKES
To: brendanf@bikeboneyard.com
Sent: Monday, March 26, 2007 5:55 AM
Subject: 85 xr350r


Hi got the part I ordered from you. Fits great. thank you. Now I'm looking for the front brake caliper, hose, master cylinder, and handle. also need a speedometer cable. thanks for your help.


----- Original Message -----
From: Stephen Coulter
To: bikeboneyard
Sent: Saturday, March 24, 2007 10:48 AM
Subject: HEY


Hey Brendan
Will I've been riding the Yamaha to work this week. Its all tagged & titled with insurance.
I put the OEM handle bars that I bought off of a 79 XS with controls. I mixed a matched everything works great now. The pic's of the handle bars. I'm happy with the bike.
The parts that you sent I was able to get the front end of the KZ 400 back together. Now I just have to workout 7 years of bugs. Like gummy carbs etc...
Catch you later Stephen


----- Original Message -----
From: Jeremy Rawlinson
To: brendanf@bikeboneyard.com
Sent: Wednesday, March 21, 2007 7:42 PM
Subject: XL 175 turnsignals?

Hello Brendan,
I just found the Bike Boneyard online and looks like you are a great resource with a loyal following. Can you help me find some turnsignals for a 74 Honda XL175 K1? I noticed the 175 you're parting out doesn't have them listed, but I was wondering if the other 70s XLs you're parting (that show signals) would fit the 74 as well. (6V, same bracket mountings, connectors, etc..). Happy to pay via PayPal for 2 fronts and 2 rears, or whatever you've got.

Thanks for any help you can provide. I appreciate it.

- Jeremy


----- Original Message -----
From: "Rose, Antwan"
To: brendanf@montana.com
Sent: Monday, March 19, 2007 12:25 PM
Subject: RE: 95 cr250 carb


>I got the carb and it looks amazing! Thanks for keeping me in mind!!!


----- Original Message -----
From: "Tony Barrett"
To: brendanf@bikeboneyard.com
Sent: Friday, March 16, 2007 9:25 AM
Subject: Can Am parts


> Hello- I am interested in the following parts from the '84 Can Am 250 ASE:
> Both side panels, airbox assembly, CDI/Coil box, Clutch and throttle cables
> and silencer. I also need the lower shock spring retainer collar from the
> white power shock, but I don't know if you can part out the shock or if you
> have a simular part "laying around." I'm only interested in the parts if
> they are in good shape (used parts are a crap shoot, I know.) Anyway,
> thanks for your help. The Can Am website says you are a great parts source.
> I will pay by Pay-Pal, so if you could send me an invoice I would
> apprecaite it. . Thanks
> again. Tony Barrett.
> v

----- Original Message -----
From: rlw
To: bikeboneyard
Sent: Wednesday, February 28, 2007 11:35 AM
Subject: 350 kawasaki parts


The parts I ordered have just come and I am pleased with the shipment. Thanks again and I will be back for more. Ron.


----- Original Message -----
From: Cathy&Eric
To: brendanf@bikeboneyard.com
Sent: Monday, February 26, 2007 9:06 PM
Subject: 1985 Honda xl80s
Brendan,
I have purchased parts from you in the past and have been happy with the parts and service.
My newest project is a 1985 Honda XL 80s
Looking for:
Exhaust – complete
Front turn signals (6 volt)
Gas tank
Rear view mirrors (2ea.)
Canister
If you have any of these parts can you shoot me an e-mail with price and shipping costs for each item?
Thanks
Eric


----- Original Message -----
From:John_Welsh
To: brendanf@bikeboneyard.com
Sent: Friday, February 23, 2007 1:55 PM
Subject: Purchase 74 RickmanVR-250 chasis
> Hello,
>
> I am interested in buying the 74 Rickman vr-250 chassis. How much for the
> complete chasis as listed on your Rickman file. I have purchased a Montesa
> engine from you previously. I am very happy with it.
Please advise me of
> price and shipping charges to California. Thank you.
>
> John Welsh


----- Original Message -----
From: Terry Rarick
To: bikeboneyard
Sent: Friday, February 16, 2007 3:39 PM
Subject: Re: SC 500 Yamaha / Complete motor and your cylinder


Hi Brendan,
I want to thank you again for the motor...it's always nice to do business with someone who is honest! I could use the handlebars and all the controls and cables. Throdel and cable, front brake lever and cable, clutch handle and cable, compression release handle and cable, kill switch. All together or just all the levers and controls minus the bars and cables. Depends on the price and condition of cables and levers etc.
Thanks again, Terry


----- Original Message -----
From: James Dragun
To: brendanf@bikeboneyard.com
Sent: Thursday, February 15, 2007 9:37 AM
Subject: DS7


Hiya,
Can you send me a paypal invoice for the forks for the DS7.
Are the forks in good enough shape to pass inspection? Is the crome tubing pitted out at all.
You actually gave me a quote about 6 months ago for 100 dollars with shipping on them. Does that still stand? And I may be getting back to you very shortly about the top end of the R5 that you have to, but I'm not sure if my mechanic will be willing to change the top ends of the motors over for a reasonable price. Either way I do need those forks so an invoice would be great if they are in good shape. Thank you very much.
By the way, I recomend your site to everyone I know with Vintage bikes. You have the best selection of bikes and parts from the 70's I've seen anywhere in the past year I've been searching.
v
James K. Dragun


----- Original Message -----
From: Teri
To: bikeboneyard
Sent: Wednesday, February 14, 2007 8:41 AM
Subject: Re: 1985 CR250 PARTS


The parts are in great shape! Thank you so much for your time and I'm sure I will be back for more parts.

Thanks again
Teri


----- Original Message -----
From: rlw
To: brendanf@bikeboneyard.com
Sent: Thursday, February 08, 2007 10:06 AM
Subject: 350 kawasaki


Thanks, the motor you send looks good and delivery work well. I would like to order some more parts from the same bike,1972 350 kawasaki F9, if i can. Tach & speedo with cables, front and rear fenders, tail light assembly,chain gard,and if the seat is in good shape, i'd like to have that as well.This is about $200 on your web site, more or less.I also have opened an accout with paypal, so please email me and tell me what parts you have and quote me a price and we can go from there. Thanks. Ron


----- Original Message -----
From: "A.R."
To: "bikeboneyard"
Sent: Wednesday, February 07, 2007 7:41 AM
Subject: Re: 1974 yamaha DT360 parts payment


> morning Brendan,
> I got my parts and was pleasantly surprised at the
> condition they are in. Very good condition,
> screws/fasnters were included, wiring was carefully
> disconnected from harness (not just cut). I'm very
> pleased with the parts I bought from you. Thank you
> very much.

>
> Ann
>

----- Original Message -----
From: Recreational Performance
To: brendanf@bikeboneyard.com
Sent: Monday, February 05, 2007 1:22 PM
Subject: .... Parts Needed ....
Hello Brendan .... my name is Dave, I spoke to you prior/recently regarding a front fender for a '75 RD350, and also with a request for a set of carbs for a '76 and/or up RD400 ....
.... I Apologize for not getting back to you sooner ... we had our first decent snowfall shortly after I had written to you, and I inadvertantly was involved in a sled mishap that has laid me up for a while ... nothing major, but enough to feel some oats (and bills) and take an absence from the garage time ... sled was totaled, but coulda been worse ...
You had written back, indicating that you might have a set of carbs from an RD350 ... would need the '76 and/or up RD400 carbs, if you don't have a set at this time, that's okay ....
Am now in need of a fuel tank for the 400 RD as well .... can be smashed, rusted, bent or bruised, just needs to hold fuel and also need the petcock .... if you have anything, would Appreciate it ...
Also, I did receive the front fender that you had sent a while back .... that was exactly what I needed, and looks Great .... Thank You Much ... by the way, the RD chrome is getting extremely difficult to come across, market is drying quickly from demand ....
If you might have the '76 or up fuel tank, would be interested to hear from you .... won't be riding for a while yet, time to get back in the swing of things with a few odds and ends ....
Thank You again, and Thank You for the front fender, you've helped me out quite a bit with this .... Dave.


----- Original Message -----
From: Amy Olsen
To: brendanf@montana.com
Sent: Monday, February 05, 2007 10:54 AM
Subject: Thanks a bunch!

Brendan

In regards to the Kawasaki Ninja 250 parts I purchased from you. Just wanted to say thanks for the awesome service! The parts you sent were in great shape and I appreciate you throwing in the little extras that will make my job much easier. I will definitely look to you again in the future if I need any more parts.

Scott


----- Original Message -----
From: John Timinsky
To: brendanf@bikeboneyard.com
Sent: Tuesday, January 30, 2007 4:04 PM
Subject: Honda Parts
Hi Brendan:
Thanks for the help with bikes and parts in the past!



I am back for more!


Do you have any of the following parts for a 1975 Honda CR250?
· Seat
· Kick starter
· Wheels with hubs
· Tank
· Rear axle
Do you have a 1975 CR125 motor?
Thanks, and with kind regards,

John.


----- Original Message -----
From: flytechusa
To: brendanf@bikeboneyard.com
Sent: Tuesday, January 30, 2007 8:03 AM
Subject: spree cylinder


>
> Nice job, Cylinder was in great shape still had cross hatching
> and the piston was very clean.Hardly any carbon at all weird
> you know, Im happy and now get this spree out of my shop.

>
> Thanks
> Jeff Baker
> Fly Tech Motorsports


----- Original Message -----
From: "tom wilson"
To: brendanf@bikeboneyard.com
Sent: Saturday, January 27, 2007 6:56 AM
Subject: 84 cr 500 front shocks


> hi Brendan this is gerry from winnipeg again the rear shock you sent me
> works great !

> i need both front shocks from a 84 cr 500 honda !
> or shocks that will work on that bike please contact me
>
>

> ----- Original Message -----
From: The Tacketts
To: bikeboneyard
Sent: Thursday, January 25, 2007 4:38 AM
Subject: Re: CB350


Hey, just got the front wheel. Looks great!! Better condition than I had expected. For future reference, in the event of needing parts for it, could you tell me what year CB350this wheel came off of?

Thanks

Charlie


----- Original Message -----
From: Waddell, William
To: brendanf@bikeboneyard.com
Sent: Monday, January 22, 2007 9:37 AM
Subject: Need parts
Hi Brendan
Thanks for sending the roto valve the bike runs great.
now I need a seat, shifter lever and a chain for 1970 Kaw.
trail boss 10 G-4 Give me a price and I will send you a check.

Thanks

Willie


----- Original Message -----
From: b spears
To: bikeboneyard
Sent: Saturday, January 20, 2007 8:52 AM
Subject: Re:


hello Brendan,my gas tank arrived last night and I was very happy with the rust free condition,looking forward to doing more business with you..Thanks Brett Spears

----- Original Message -----
From: Greg Carver
To: 'bikeboneyard'
Sent: Saturday, January 13, 2007 11:31 AM
Subject: RE: SL100


Hi Brendan. The SL100 parts that I purchased from you worked great and I’m almost done w/ my restoration. I’m looking for a speedometer and right wing mount (for the front brake lever and mirror) for the same model bike. Please let me know if you have these parts.

Regards,

Greg


----- Original Message -----
From: REZOD1
To: brendanf@bikeboneyard.com
Sent: Saturday, January 06, 2007 11:44 AM
Subject: MAICO GARAGE4.JPG


Brendan

The wheels arrived friday, they will work perfectly for my 82 490 project. You have gained a new customer, Thanks again!!

Here is a pic of a few of my currebt projects.

John Fraase


----- Original Message -----
From: Brian Kondrath
To: bikeboneyard
Sent: Thursday, January 04, 2007 3:26 PM
Subject: Re: Parts


Hi Brendan,

Just wanted to let you know i got the forks, they are perfect. Thanks! Would you have a bar clamp that would fit these? Brian


----- Original Message -----
From: "David Hatcher"
To: brendanf@bikeboneyard.com
Sent: Friday, December 29, 2006 2:52 PM
Subject: Honda Xl
> Brendan, Thank You , Thank You, Thank You!!!! The lock is perfect .
> Please let me know if there is ever anything I can do to repay all your
> kindness and help. If you ever get to central PA. let me know .... want
> to take you to a Penn State game in our season seats... the wife says
> its her treat...including your lodging and BEER!!! Um did I remember to
> say THANK YOU? PS. keep you eyes open for the discussion on Marks
> site... a blatant plug for your site is gonna be there!
David and Robin
> Hatcher.


----- Original Message -----
From: Steven Leuck
To: 'bikeboneyard'
Sent: Friday, December 29, 2006 1:51 PM
Subject: RE: '86 Suzuki Intruder VS700
Received the package. THANKS!
Most parts in pretty good shape for being 20+ years old. I’ll remember to contact you again should I find myself looking for more stuff and will be sure to pass your name around to others as providing a good deal.


Steven Leuck

Oregon


----- Original Message -----
From: "David Hatcher"
To: brendanf@bikeboneyard.com
Sent: Tuesday, December 26, 2006 11:24 AM
Subject: XL parts


> Brendan, got my parts today. WOW!!!!!! they are perfect!...just what the
> doctor order. Just let me know if there is any thing I can do to help
> you out some time I will be more than happy to try and help. I sent the
> link to your site to a bunch of my resto buddies hope it gets you some
> well deserved business . Thanks again and Happy Trails... you ROCK!
David H.
>

----- Original Message -----
From: "Chip Hewlett"
To: "bikeboneyard"
Sent: Thursday, December 21, 2006 11:37 AM
Subject: Re: Suzuki TS250, 1970


> For your customers:
> Brendan sends more than you need, and usually, you need those extra parts.
He goes the extra mile to ensure your success. Every time.
>
> Chip


----- Original Message -----
From: "olivier higuet"
To: brendanf@montana.com
Sent: Thursday, December 21, 2006 10:17 AM
Subject: XR 75 tank just arrived
>
> Hello
>
> Thanks a lot again for the XR 75 gas tank.Looks great.I should recommend
> your services to everyone looking for hard-to-find parts.great job.

> OLIVIER(Belgium)
>

----- Original Message -----
From: Turner, Ed
To: bikeboneyard
Sent: Tuesday, December 12, 2006 3:57 AM
Subject: RE: Hard bags for xs850


Thank you very much. Pleasure doing business with you. Will probably do more. I find I need a shift linkage now for a XS850 mine is starting to get worn out. Will start with your web site


----- Original Message -----
From: Wood, Mark
To: brendanf@montana.com
Sent: Monday, December 11, 2006 11:14 PM
Subject: Re: 1981 Yamaha DT175 Triple Clamps

Thanks for the reponse.
I just need to confirm that the IT175 alloy wheel comes with the brake and ideally the cable. A picture of the wheel from brake side would be excellent. (I'm mixing and matching on a project.)

If it looks like it will work for me I will be going ahead and ordering it along with the DT175 triple clamps. (I'm a previous and satisfied customer of yours.)

Mark Wood


----- Original Message -----
From: Greg Carver
To: 'bikeboneyard'
Sent: Thursday, December 07, 2006 9:46 PM
Subject: RE: SL100


I received the handlebars and shocks. Great shape and as promised. Let me know if the taillight assembly is a 4 bolt mount. If so, I’ll purchase as well.
Regards,

Greg


----- Original Message -----
From: Mike Hansen
To: brendanf@bikeboneyard.com
Sent: Thursday, December 07, 2006 11:04 AM
Subject: parts request 1968 Yamaha DT1


Hello again Brendan,

You have been very helpful to me in the past so I thought I’d check with you again. I am interested in the below items that you have listed in your inventory. It is important that they are 1968 pieces only, as it was not uncommon for later model parts to be added throughout the years by previous owners. In the interest of eliminating any confusion prior to the ordering and shipping of any parts, it would be a big help and greatly appreciated if you could please send me a picture of the parts in question. If there are any questions, please don’t hesitate to ask. Let me know if you need any further clarification and I will call you. However, some good pictures should clear up any confusion.
1) Wire harness: Is this the complete harness from headlight to tail light or just the main harness. Is it uncut with all connectors attached and in good, overall condition?
2) Tail light bracket: Straight with one mounting hole instead of two on the bottom end.
) Headlight bucket assembly: Originally white in color. Is it straight and does it include the chrome ring, NON sealed headlight lens, high beam indicator lens and related wiring?
4) Battery box: Is it straight without a lot of corrosion? Although ’69 and some later years will fit, they would differ slightly in appearance from the ’68 as various production upgrades began taking place.
5) Kick arm: Is this the original ’68 or the later type?
Thank you, Mike Hansen

----- Original Message -----
From: "christopher moser"
To: brendanf@bikeboneyard.com
Sent: Thursday, December 07, 2006 10:19 AM
Subject: 1976 Kaw KE175


> Hi..
> I bought a set of exhaust's for my 1970 CL450 exhaust
> from you a few years ago..they worked out great.
In
> Fact.. Some Japs came over my house to buy another
> bike.. saw the ol' CL and bought that and exported it
> back to Japan.
> I see you have a 76' Kaw KE175 that your parting and
> I'm looking for a tank and possable a seat for my
> 1977.
> Do you still have something that would work.. need
> not be pretty, but definitly a good working tank.
> Chris... phx, Az.
>

From: Rick Whiting
To: bikeboneyard
Sent: Monday, December 04, 2006 7:09 PM
Subject: RE: 1980 yamaha mx 80


I guess I don't need the brake pedal, but I would like to order the front brake adjuster from down by the wheel (5), and the gas cap (10).will send a check for 15 + 8 shipping = $23.
The boys will be excited.
If shipping is less, keep the difference for Christmas.

Thanks for the service. Fun website....i'd like to stop by if I'm ever out in your neck of the woods.

Rick Whiting


----- Original Message -----
From: "Thompson, Stephen F"
To: "bikeboneyard"
Sent: Thursday, November 30, 2006 2:29 PM
Subject: RE: AW 400


> WOW! I guess I know why people have such great things to say about you!!
> I will deal with the tank the new wheel will be fine and I will feel
> much better about the whole deal. Thank you for being a straight up guy.
> Would you like me to send the steel wheel back? My home address is
> Steve Thompson >
>
> Thanks again.
>
> Steve


----- Original Message -----
From: "Terry Jacobs"
To: "bikeboneyard"
Sent: Tuesday, November 28, 2006 10:21 AM
Subject: Re: yamaha seca 750 1981


> Thanks for the reply. I have agood rear 750 wheel but wanted one wider
> than the 120 that is on there. If the one is a 130 I will take it.
>
> Also, what shape is the gas tank in on the 750? I have one with no rust,
> but it has a dent in it.
>
> I posted a positive review of your place on XJbikes.com since you have
> helped me a couple times in the past and have always given good service.
> Hopefully these wankers make you filthy rich. :)

>
> http://www.xjbikes.com/Forums/viewtopic/p=21942.html#21942
>
> Cheers,
> Terry


----- Original Message
From: "frohrs"
To: brendanf@montana.com
Sent: Tuesday, November 14, 2006 4:43 PM
Subject: Re: Mark`s Motorcycle Swapmeet at VINTAGEMX.US


>I received the pipe today & it will work well. Thanks for answering my add
> about LT2 parts.
> Forrest Rohrs


----- Original Message -----
From: DannyAatBville
To: brendanf@montana.com
Sent: Monday, November 13, 2006 3:18 PM
Subject: Re: Honda cb160 info


Hey there Brenden, the wheels just arrived and I've unpacked them. They are very nice . Actually nicer than I had hoped for,thank you very much. Danny


----- Original Message -----
From: sylvain saulnier
To: brendanf@bikeboneyard.com
Cc: sylvain saulnier
Sent: Wednesday, November 08, 2006 6:45 PM
Subject: re frame rt 360 yamaha


hi today I HAVE RECEIVE THE FRAME FAST SHIPPING GOOD FRAME ALSO HAVE YOU ANOTHER FRAME RT 360 YAMAHA THANK YOU SYLVAIN


----- Original Message -----
From: "michael hauptkorn"
To: brendanf@bikeboneyard.com
Sent: Wednesday, November 08, 2006 3:51 PM
Subject: bultaco parts


> Brendan,just wanted to let know I was pleased with the bultaco parts I
> received today.
When you have time,send me a list of what bultaco parts
> you have. I have a few more bikes to restore and am looking for some
> more. Thanks Mike
>


----- Original Message -----
From: Ron Underwood
To: brendanf@bikeboneyard.com
Sent: Wednesday, November 08, 2006 7:05 AM
Subject: 200x rear hydraulics


I want the master cylinder, reservoir, reservoir line, brake line, and rear caliper. I have bought from you before and have been pleased


----- Original Message ----- From: Otto - Natec
To: bikeboneyard
Sent: Wednesday, November 08, 2006 9:16 AM
Subject: Re: Pair of fork tubes for Yamaha GT80 and other parts...


Thanks for the answer Brendan,
I´d like to buy this set of forks. If you say they are ok, they are ok (every part you send me in the past was better than expected).
About the other parts I assume you don´t have them. Isn´t it?
How do you like to bill me? Paypal? Credit card? Or...?
Have you my adress yet?

If not:

Otto Mackrodt


----- Original Message -----
From: "David Graf"
To: brendanf@bikeboneyard.com
Sent: Tuesday, November 07, 2006 3:59 PM
Subject: kawasaki kt250


> got my parts,thanks! do you have the left engine cover(stator cover) that
> isn't damaged other than scratches?


----- Original Message -----
From: Russ
To: brendanf@bikeboneyard.com
Sent: Monday, November 06, 2006 9:31 PM
Subject: Yamaha parts

Brendan,

Thanks for the parts, good quality, fast service. I am sure we will be emailing more before this project is done..

You don’t happen to have a luggage rack for a 75DT250 do ya?

Thanks

Russ


----- Original Message -----
From: Leadking2
To: brendanf@bikeboneyard.com
Sent: Monday, November 06, 2006 7:57 PM
Subject: Carb


Got the carb, Looks good, Thanks

Joe


----- Original Message -----
From: Mks301
To: brendanf@bikeboneyard.com
Sent: Sunday, November 05, 2006 8:02
Subject: 1980 CR-250R


Got my tank for the KTM495 the other day,looks great!I am writing to see if you have a seat-base and the carb to air-box boot for a 1980 CR-250R? Thanks,Mike


----- Original Message -----
From: "Wes Peterson"
To: "bikeboneyard"
Sent: Friday, November 03, 2006 10:09 AM
Subject: Re: Parts Request


> Brendan,
>
> I got it yesterday and it works. Thanks so much for your customer
> service.
>
> Wes
>

----- Original Message -----
From: LTABERSKWAK
To: "bikeboneyard"
Sent: Sunday, October 29, 2006 4:09 PM
Subject: Re: shipping on xr200


> Purrs like a kitten; runs like a top...
> Took it on the first ride today (before the snow starts in Green Bay)
>

----- Original Message -----
From: LTABERSKWAK
To: "bikeboneyard"
Sent: Friday, October 27, 2006 2:42 AM
Subject: Re: shipping on xr200


> Hi Brendan,
> Just to let you know the bike arrived yesterday!
> My husband and son were up all night assembling it in the garage - what fun!
> Thanks for EVERYTHING. We hope to do business with you again.
> Linda Tabers-Kwak (for John Kwak & son, Jon)


----- Original Message -----
From: Jlharpey
To: brendanf@montana.com
Sent: Friday, October 20, 2006 5:18 AM
Subject: ct70 parts


finaly here..nice stuff! thanks.. next order we'll have to do it different. thanks jim in fla


----- Original Message -----
From: "cody tellis"
To: brendanf@montana.com
Sent: Thursday, October 19, 2006 9:14 AM
Subject: Re: cody tellis has just sent you $70.00 USD with PayPal


>I appreciate being able to buy from a dependable guy. let me know if
> anything unusual turns up or if you hear of works bikes etc.
>
> I need a YZ 1974 125 frame and motor, am looking for a core 360YZ same year.
> and all the usual bull, montesa, maico CZ pieces.
>
> cody
>
>
----- Original Message -----
From: MotodanGT
To: brendanf@bikeboneyard.com
Sent: Thursday, October 19, 2006 9:02 AM
Subject: dt 175


Hi Brendan, I have a 1975 dt175 I need a stator and flywheel my stator has 4 wires on it colors are yellow,green,blue,lt green with red stripe and a black one with some kind of a fuse block or something. do you know what that might be? a friend has a 1975 dt175 but his don't have that thing on it so I'm wondering if the 1974dt175 you have has this or not? I got the bottom end of a TC185 from you and it works fine thanks. Dan in Michigan.


----- Original Message -----
From: Flathdjack
To: brendanf@bikeboneyard.com
Sent: Tuesday, October 17, 2006 1:29 PM
Subject: parts recd.


hi brendan, i safely recd. the turbo muffler, xt 250 kicker and shock monday, thanks, jack.


----- Original Message -----
From: "Leslie
To: brendanf@bikeboneyard.com
Sent: Thursday, October 05, 2006 5:25 PM
Subject: 86 lt230 Suzuki Plastics


> How much would shipping be to Raytown, MO 64133 for the ATV plastics?
> Also just wanted to thank you for the Honda VTR 250 parts I bought from
> you they worked and look great.

>
> Thanks,
> Brandon Leslie
>
>
----- Original Message -----
From: "Adam"
To: "bikeboneyard"
Sent: Wednesday, October 04, 2006 1:04 PM
Subject: Re: MSN-Request: 1982 Honda ATC200S


> Brandi,
>
> Thanks for the parts I just unpacked them. they look good i look forward to
> working with you soon.
did you say you didn't have a master cilinger for a
> 1982 GL 1100? let me know
> thanks again,


----- Original Message -----
From: Jack Gardner
To: brendanf@bikeboneyard.com
Sent: Tuesday, October 03, 2006 9:52 PM
Subject: HUsky wheel


Brendan

the husky rear wheel showed up today, looks great, as do the YZB inner panels.
I found a crack in the front rim now, and need a 75-76 21 inch silver rim for a CR conical hub, not the WR standard hub. would you have one that's not beat up and round?

thanks

Jack

Wish I lived closer, that 75 CR 250 looks pretty good.


----- Original Message -----
From: Scott Steger
To: brendanf@montana.com
Sent: Monday, October 02, 2006 1:13 PM
Subject: Shock Parts


Got the parts Brendan, Thanks a bunch! Let me know if I can ever help you!

Thanks
Scott Steger
www.vintagefactory.com
Check out the exclusive vintage video clips online!!


----- Original Message -----
From: GARY SKAGGS
To: bikeboneyard
Sent: Friday, September 29, 2006 2:57 PM
Subject: Re: green suz gt 750 parts

BF, I got the ears in good shape. THANKS. Keep your eyes open for the green side cover and I will buy it. Let me know when you find it. Gary


----- Original Message -----
From: kdebolt
To: brendanf@bikeboneyard.com
Sent: Thursday, September 28, 2006 9:06 PM
Subject: mr 178 honda tank


Got the tank today looks good Thanks Ken


----- Original Message -----
From: gerry anderson
To: brendanf@bikeboneyard.com
Sent: Monday, September 25, 2006 6:52 PM
Subject: shock


hey brendan thanks the 84 cr 500 shock works great!!


----- Original Message -----
From: Misstomcat9
To: brendanf@montana.com
Sent: Friday, September 22, 2006 4:05 PM
Subject: Re: on the weslake bike


i got the bike she looks good. if you get any more for this price email me . thank you


----- Original Message -----
From: Justin.Lucente
To: brendanf@montana.com
Sent: Tuesday, September 19, 2006 1:58 PM
Subject: RE: 1972 TC125


Hey Brendan,

Received those parts yesterday - everything looks good. I will make sure they all match up this afternoon. Another quick question for you: I have a 1977 Honda CB400Four and I am looking for the triangular shaped side cover on the left side that covers the turn signal relay and some other electrical connections. It is about the size of a pie-plate or so, and it is maroon in color. If you have one available, I would be interested in it.
Let me know if you happen to come across one...
I appreciate your help,
Justin


----- Original Message -----
From: LOWKOW
To: brendanf@montana.com
Sent: Tuesday, September 19, 2006 11:04 PM
Subject: Re: Rayjay turbo


It arrived today. Thank you very much. Do you have other turbos? I am interested in buying more.


----- Original Message -----
From: WisDrum
To: brendanf@montana.com
Sent: Thursday, September 14, 2006 10:05 PM
Subject: Re: tank for it250


the tank for the 1982 it250 does it have cracks ?? cause i have an 1981 it250 and it has a tank on it that doesn't fit rite ?? and for a new one it would be 200 dollars!! so i guess this is where im gonna shop for parts cause its awsome here =]

thanks,
quincy


----- Original Message -----
From: Tim Davidson
To: brendanf@bikeboneyard.com
Sent: Monday, September 11, 2006 11:03 AM
Subject: 1971 honda cl350


Hey, Brendan - I got that engine and it is working descently so thank you - I was wondering if you had a front brake switch for the same model?

Tim Davidson


----- Original Message -----
From: "Richard Blakley"
To: brendanf@bikeboneyard.com
Sent: Thursday, September 07, 2006 10:39 AM
Subject: Side Panel for '77 Z 50?


> Hi Brendan:
>
> You've saved my bacon on a couple of parts for my '74 TS 125 Suzuki.
> Wonder if you could do the same for me with my son's '77 Z 50 Honda Mini
> Bike? If you come across a side panel for one, please let me know and
> I'd be thrilled to take it off your hands.
>
> Many thanks in advance,
> Richard Blakley


----- Original Message -----
From: "Richard Bessey"
To: "bikeboneyard"
Sent: Friday, September 01, 2006 2:37 PM
Subject: Re: Need Parts


> Brendan,
> Keep me in the loop so I know whats up. I got the bike taken apart in the
> shops taking up space. So the earlier the better. But I greatly appreciate
> you going to extra mile and not sending me wore-out parts (Part of the
> reason we always buy from you
)
>
> Richard
>

----- Original Message -----
From: Watcon
To: brendanf@bikeboneyard.com
Sent: Tuesday, August 22, 2006 1:55 PM
Subject: XL-250 motor

Hey Brendan,
I received the XL-250 motor in good condition today, but I was a little disappointed as all the Red Bull cans were empty.. Hahahaha!!


Thanks,

Randy


----- Original Message -----
From: Brian Brillon
To: bikeboneyard
Sent: Thursday, August 17, 2006 1:15 PM
Subject: Re: Notification of Payment Received


i received the starter today...Thanks for the fast service...
Thanks Brian


----- Original Message -----
From: John Crampton
To: brendanf@bikeboneyard.com Sent: Sunday, August 13, 2006 5:56 AM
Subject: GT 380 front fender


Hi Brendan

I have received the GT front fender and is great, many thanks. I now want to do some more business with you and need some quotes to the UK mainland :-

Front fender plus shipping (economy and priority) for any 70s GT model (I noticed the GT 380 for $20)

Also

Standard mufflers for 70s Yamaha RD 250/ 400 either will be ok plus shipping (economy and priority), In addition I need a digital photo of these to make sure they fit UK models.

I hope I find you in good health and Montana is still as good as it looks in pictures and books

John Crampton Nottingham United kingdom


----- Original Message -----
From: "Steve Rognas"
To: "bikeboneyard"
Sent: Tuesday, August 08, 2006 5:46 AM
Subject: Re: benelli mini enduro parts


> hi brendan,
> parts came. cool!!! just what i needed. thanx a bunch. steve


- Original Message -----
Subject: Re: b-25 oil in frame / frame
From: jerry

Date: Sat, August 5, 2006 7:34 am
To: "bikeboneyard"

>8-5-06 brendan- all the parts got here o.k. thanks for the great
service................jerry



- Original Message -----
date:7/27/06 3:53 pm
subject-bought two rd-350,73,74..
from: DJCHARLEY
to: bikeboneyard
thanks again branden,this time iam back with two rd-350 road machines for the winter projects the 73 has no motor,and the 74 has a motor that turns over,the 74 was set up to be a road racer,like everything is stripped off accept the speedo,the 73 is the purple and white striped gas tank with the glued on yamaha emblem, this one is stock with one broke off blinker on the right side,and is minus one motor,he called this one a rolling chassis, the man ho sold the bike to me gave the engine to me in a box,the top-end is ok!but needs a bottom end on the crank shaft side,when pulling apart the engine everything went into this box,and there it set for while, brendan what would the post offoice ask for in shipping from your neck of the woods to wasilla the land of the birch wood,i can set myself up for a working rd-350 lower-end,can you help! and the mr-175 i been working on is running good,thanks to the pipe you sold me its cool working with you, well i got to go thanks donny


- Original Message -----
date:7/27/06 2:23 pm
subject-Re: Speedo for 1971 TS 125 Suzuki
from: Richard Blakley
to: bikeboneyard
Brendan:
By George, you've saved me again. I'll trundle off to the bank and get a money order and stick in the the mail this afternoon. Many, many thanks.
Richard Blakley


- Original Message -----
date:7/25/06 9:15 pm
subject- Parts for 1976 XS750
from: Rich Barthel
to: bikeboneyard
Brendan, I purchased a frame from you several months ago and I am very pleased with it. It is now fully refurbished and powder coated. Looks better than new. I need a couple of parts to finish the bike. I need a left side rear foot peg and a right side plastic cover that snaps on over the starter solenoid. Do you have these parts an if so how much including shipping?
Thanks,
Rich Barthel


- Original Message -----
date:7/19/06 11:26 pm
subject- Re: Mark`s Motorcycle Swapmeet at VINTAGEMX.US
from: christophe chauvet
to: bikeboneyard
Thank you for your fast shipping.You are serious, the tank is as you described it: dent free!! I'm looking for a rear hub for my 250 yz 1981 ( 465 1981 is the same). Have you got this part? Thanks


- Original Message -----
date:7/18/06 11:11 am
subject- Re: Notification of Payment Received
from: james murphy
to: bikeboneyard
Just wanted to thank you for the Rickman wheels. They arrived yesterday in great shape. I know someone else needing a Rickman front wheel like the one I just got, so if you have another please email me the price and a picture. Thanks again, James


- Original Message -----
date:7/14/06 7:49 pm
subject- more gt-750 parts?
from: thelma bland
to: bikeboneyard
Hi, I bought the Suzuki Gt 750 parts off of you in late June, and I recieved them UPS today, everything went fine! (You stripped the green GT750 for me)Last month you wrote back to me saying that you had a good gas tank for $50,(I don't think it was off of the metallic green bike,as it has the emblem holes filled in) I'd like to get a good tank (E-mail me to let me know) and as good a pair of correct rear view mirrors as possible (dare I say as rust free as possible). I am still looking for a new or used stator for my 1985 KTM 250, also. Any help on that? Thanks for your time, Warren Bland


- Original Message -----
date:7/12/06 11:50 am
subject- Re: 1972 Honda CT70 Exhaust
from:denny 2
to: bikeboneyard
Brendan,
I gave John his exhaust and he is totally pleased with it. Just wanted to pass that on to you.
Thanks,
Dennis


-- Original Message -----
date:7/06/06 3:42 am
subject- 81 xr80
from:clay fugate
to: bikeboneyard
hi brendan,
im interested in the xr 80 tank and seat for the 81 model. can you send me some pics and prices.
i have an xr 100 im trying to put back together. i think they will interchange ok??
thanks
clay fugate

btw. i received the husqvarna tank and forks last week. they are great.

clay


-- Original Message -----
date:7/05/06 6:23 pm
subject- suzuki handlebars
from:kelly wright
to: bikeboneyard
I was very pleasantly surprised today, I received a pair of handlebars for a Suzuki. I wasn't expecting this and had simple chalked them up as one of the losses one experiences in life from time to time.

Thank you Brendan, I appreciate your follow though and honesty. I'll be back for more parts as the need arises.


Kelly Wright


- Original Message -----
date:7/04/06 10:49 am
subject- kickshaft
from:kelly wright
to: bikeboneyard
Brendon
Recd the maico kickshaft,,thanks alot, it was the correct one, and in great shape,,Thanks also for the super quick shipping, it is always a pleasure finding people that can deal correctly and honestly....It is going to be a while before I get to the GS 490, or even really thinking about what I will do with it or trade for, but will keep you posted..Have to finish this 400 square barrel project first..

Thanks again
Jim in Manhattan, MT


- Original Message -----
date:7/04/06 12:29 am
subject- ts-185
from:thomas bulow
to: bikeboneyard
Good morning Brendan,

this is the final reply:
Items have arrived - Thank you
It has been a pleasant contact

Regards
Tom


-- Original Message -----
date:6/23/06 11:04 am
subject- Re: Notification of Payment Received
from: rainmaker
to: bikeboneyard
Brendan,
The S2 gauges arrived. Exactly what I needed for that particular project. You have no freakin' idea how happy that makes me right now.
When I figure out what I need for the next project, I'll let you know and we'll do it again. Many, many thanks.
As always
,
Barry Smith
Spokane


--- Original Message -----
date:6/19/06 7:30 pm
subject- Re: Notification of Payment Received
from: av cycles
to: bikeboneyard
Please disregard that last email I didn't look in the box well enough I
guess . Boy do I feel like a dumb ass lol ..please accept my sincerest
apology . Everything looks good and thank you for the throttle that was
very cool of you to throw that in with the other parts and I am sure it
will come in to use in the near future . I will check your site out again
next time I need some good used parts , everyone was right you are a good
seller and person to deal with


Regards
Ron
ARC


--- Original Message -----
date:6/13/06 10:08 pm
subject- parts received
from: tristan
to: bikeboneyard
Hi! I got my parts today. Everything looks great!! I already put my headlight guard on! Now I just have to put the shaft on. I will e-mail if I have any questions. Thanks! Tristan

--- Original Message -----
date:6/07/06 8:19 pm
subject-paypal
from:joe hinton
to:bikeboneyard
hey Brendan, got my parts in, they are in great shape, will be doing bus. with you in the future. thanks again. Joe


--- Original Message -----
date:6/06/06 7:24 pm
subject-paypal
from:bruce Miller
to:bikeboneyard
Hi Brendan, I recently purchased a rear wheel for the above mentioned bike, very happy with your service! Looking for a luggage rack and any other travel type accessories. thanks, bruce Miller

--- Original Message -----
date:6/04/06 2:19 pm
subject- 82 Honda CB750SC Nighthawk
from:steve knapp
to:bikeboneyard
Hi Brendan. Two weeks ago I bought a right switch assembly for this bike from you guys. It was a perfect match. Thanks! I’d be interested in the left side switches also if you have it. The thing I’d really like to have is a soft metal insert that fits into a slot inside those assemblies. It has a little peg on it that goes into a hole punched into the handlebar so it doesn’t twist. No big deal if you can’t find one. Thanks. Steve

--- Original Message -----
date:5/31/06 8:32 pm
subject-shipment
from:psykon69
to:bikeboneyard
brendan
got the wheel for the 81cm 400 today
thanks--its exactly what i needed
more thanks for the extra goodies especially the axle tensioners which will come in real handy.
hope to do "bizness" with ya again !

psykon69


--- Original Message -----
date:5/27/06 6:19 pm
subject-ct-1 oil tank
from:packerfan509
to:bikeboneyard
Good stuff.
Thanks


--- Original Message -----
date:5/26/06 12:34 pm
subject- sl-125
from: fat boy
to:bikeboneyard
Hi Brendan,

Thanks for the seat. It will work great. Thanks for the great service and
responce.I am sure I will be buying more later. Thanks again tim



---- Original Message -----
date:5/22/06 1:24 pm
subject- vtr-250
from: Eric J. Kreitzer
to:bikeboneyard

Pbkgraphics wrote:
> Hey Brendan sent payment for Right side fairing using pay pal.the shipping address is my place of employment Spiegler Brake Systems USA .We manufacture stainless steel motorcycle brake lines, also carry a wide variety of performance parts, my point is I have owned the VTR250 for about 5 years and with being in the bike business I have looked for years to find this part only to come up with no results. In the end lets just say you are a God send. will look forward to doing business with you again
> Thank you very much
> Eric J. Kreitzer
>
> P.S. After years of hunting i'm like a kid waiting for christmas morning
> sad part is it's not even my pride&joy just an old reliable bike sitting in the stable with the other three 89 VTR250(2),75 Kaw KZ100,85 Suzuki gs750 & my pride&joy 2002 CBR954RR any way Thanks again


---- Original Message -----
date:5/19/06 4:24 pm
subject- cagiva wmx-250
from: marc lodberg
to:bikeboneyard
Hello,

I've received the forks yesterday. And thanks very much for the good service!

Thanks again, Marc lodberg



---- Original Message -----
date:5/15/06 7:18 pm
subject- ts-185 headlight
from: ryan marie
to:bikeboneyard
I received the headlight and it works great. Thanks
for the fast shipping.

Ryan


---- Original Message -----
date:5/15/06 2.54am
subject- rt-1
from: alf tømmervåg
to:bikeboneyard
alf tømmervåg wrote:
> Hi !
>
> First of all i want to tanks for the compression release assy for RT1 1971 mod.
> It works great on my bike !!

>
> Now i wonder if you have the Rubber intake boot for this bike.
> It is importent that it is for RT1 1971 mod. with the black tank.
>
> If you have one of these please let me know.
>
> Regards, Alf


---- Original Message -----
date:5/4/06 5:36pm
subject- tc-90
from: elitecycle@
to:bikeboneyard
Im looking for a coil and plug wire combination for a 1972 TC90 Suzuki. Let me know the total cost plus shipping. Thanks from a satisfied customer who has ordered from you before.


Elite Cycle Service


---- Original Message -----
date: 5/2/2006 4:35 pm
from: cyrille.derieux
to:bikeboneyard
I received the parts you sent me out today.
I have found another ignitor. I let you know if I need others parts. You re a good dealer.

Thanks.


---- Original Message -----
date: 5/2/2006 7:10 AM
from: monggo@
to: bikeboneyard
subject: brake caliper


I would like to thank you for the last parts, they
were great.
I need a front brake caliper for a 1979 CB
750K. Please let me know how it will be with shipping.
Was also curious if you could disassemble it
completely before shipping? If not that will be OK, I
will have to take to a shop then.

Thanks
Mark

Don't Know
Monggo Only Pawn In
Game Of Life!


---- Original Message -----
date: 5/1/2006 9:19 AM
from: Robert.A.Kiddy@
to: bikeboneyard
ca-77
Kiddy, Robert A wrote:
> Thanks for the headlight. It is in great shape and works fine. I appreciate your quick turnaround on that. I was wondering if you have a speedometer cable for that bike now. It is a 69 Honda Dream 305.
> Thanks,
> Kiddy


---- Original Message -----
date: 4/18/2006 8:14 AM
from: Lance Tuhy
to: bikeboneyard
ca-77

Hello,

I've heard good things about you guys!

I found that you are parting out a 1975 DT400. I am in need of the plate
that holds the ignition coils called the "magneto base".

I was on the Yamaha parts catalogue and found a part number for the CDI
Magneto Assembly (500-85500-20-00) but it didn't call out the magento base.
In the same parts list, the 250B model called out the magneto base
(438-81309-20-00) so I think they used the same plate.

Eithor way, do you have this part off of the bike? I would take the entire
magneto plate assembly with the coils and everything if you can't part out
just the plate...(flywheel/magneto not needed)

If so, let me know how much you need for it.

Thanks for your time!


---- Original Message -----
From: bikeboneyard
To: RICHARD HICKMAN
Sent: Saturday, April 18, 2006 9:26 AM
Subject: Re:
GOT THE HEADS TODAY AND AM VERY PLEASED.

THANK YOU VERY VERY MUCH



---- Original Message -----
From: rbarthel
To: brendan fennessy
Sent: Monday, April 14, 2006 5:58 PM
Subject: 1976 XS750 Frame
Brendan.
The frame arrived late yesterday in great condition. Thank you very much for your help and flexibility for this sale. I will most certainly recommend you to my friends and I will buy from you again.
Rich


Lance Tuhy ---- Original Message -----
to: bikeboneyard [mailto:brendanf@montana.com]
Sent: Sunday, April 14, 2006 9:06 AM
From: Chris
Subject: Re: KTM/495
Brendan, I got the forks a couple days ago, everything’s fine, they look pretty nice, I found another 495 this weekend so I’m sure Ill use them…thanks for the help again…Chris


---- Original Message -----
to: bikeboneyard
From: shawn lybarger
Sent: Sunday, April 13, 2006 12:56 AM
Subject: Re:

shawn lybarger wrote:
> thanks a bunch just got it today fits real good do u still have that artic cat-


----- Original Message -----
From: Neil Devine
To: brendanf@montana.com
Sent: Monday, April 10, 2006 12:46 PM
Subject: got my nighthawk 700s seat - thanks

Hi Brendan:

I got the seat by the weekend. Just caught the UPS guy as he was driving down my street. Signed for it and he was off. I’ve been riding with the new (old) seat instead of the Corbin that came on the bike. Much more comfy!

Thanks for everything! You saved my ass!

Neil


----- Original Message -----
From: Verne Antrim
To: 'brendanf@bikeboneyard.com'
Sent: Monday, April 10, 2006 5:48 PM
Subject: FW: GS1100

Hi Brendan

Just a note to say thanks, my 1982 Suzuki GS1100 in now on the road thanks to a ton of parts from you guys over the last year. All have worked out great. The picture was taken right after I went out on my first ride. I had a few carburetor adjustments yet and was running a bit rich, got some fouled plugs and ran down the battery. All is good now. Not bad for my first bike. Still need a few things from you, will take an inventory and get back to you as to what I will need.

Here you will see the Exhaust pipes you sent me, Carburetors, Instrument cluster, Head light and tail light controls, all work well.

Thanks again
Vern Antrim

Now pardon me while I go out and try to learn to ride this baby !!!!!!!!!!<


----- Original Message -----
From: "Jeff"
To: brendanf@bikeboneyard.com
Sent: Monday, April 03, 2006 11:58 AM
Subject: GYT KIT
> Brendan:
> Do you have any Yamaha GYT kit parts for a DT & RT?
> > I bought a 440 Maico enduro from you 4 yrs, ago, great bike, fast.
>
>
----- Original Message -----
From: Chris McIlwain
To: brendanf@bikeboneyard.com
Sent: Thursday, March 30, 2006 9:05 PM
Subject: Can-Am


Hey Brendan:
I need a titled tnt frame,a silencer complete for a 1980 Qual 3 400 and spark arrester or silencer complete for a 1977 175 Qual.I use your site first looking for can-am parts so Keep it updated
The 79 250 Qualifier I purchased from you is a great bike.
Thanks++++++Chris in Florida


----- Original Message -----
From: sara marsh
To: brendanf
Sent: Thursday, March 30, 2006 10:16 AM
Subject: parts for kz650


thank you so much for the parts we ordered recieved them today my husband is very pleased

thanks again

sara and sam marsh


---- Original Message -----
From: Norberto Caban
To: brendanf@montana.com
Sent: Thursday, March 30, 2006 6:03 AM
Subject: Thanks


I received the part yesterday. Thanks for the great service.


----- Original Message -----
From: Charles STEELE
To: bikeboneyard
Sent: Monday, March 13, 2006 5:45 PM
Subject: triumph parts


hi brendan..i was well pleased with the triumph frame.i.got a front end on it,,how much to get the rear wheel and brake? is there an axel?..thanks...wayne


----- Original Message -----
From: mel
To: brendanf@bikeboneyard.com
Sent: Sunday, March 12, 2006 11:26 PM
Subject: XS1100

Hi brendan,
Getting my yamaha xs1100 back togeather, but need a exaust. The other parts I got form you worked great!
What have you got for exaust that will fit a 1979 Xs1100. I have a 4 into one but no muffler. If you have a slip on that would be great also.
Thanks
Mel


----- Original Message -----
From: Jack Gardner
To: bikeboneyard
Sent: Friday, March 10, 2006 7:51 PM
Subject: Re:
Head and Cyl arrived today looks great!!! Thanks
Jack


----- Original Message -----
From: "Meergruen, Arved H."
To: "'bikeboneyard'"
Sent: Tuesday, March 07, 2006 11:43 AM
Subject: RE: Money order for headlight assembly on 360 Yamaha RT-1 1971
> Hi Brendan, just to let you know I received my order from you yesterday.
Thanks a lot for sending the stuff to me. Now, at least, I know what the split cable to carburetor and oil pump looks like! The only thing you screwed up badly is my name. It is Arved Meergruen. Talk to you in the future!
>

----- Original Message -----
From: "Patrick McDonald"
To: brendanf@bikeboneyard.com
Sent: Wednesday, March 08, 2006 12:04 PM
Subject: KLT 250

> Hello,
> Recieved the axle , Thankyou much.
> Have a great day
.
>

----- Original Message -----
From: "Doug Ritter"
To: "bikeboneyard"
Sent: Friday, March 03, 2006 4:40 AM
Subject: Re: 87 Suzuki VS700 carbs


> Bike bone those carbs will work .I do thank you for
> getting them here as quick as you did again
thanks
> Doug Ritter


----- Original Message -----
From: "JULIO VALDEZ"
To: brendanf@bikeboneyard.com
Sent: Friday, March 03, 2006 1:47 AM
Subject: Honda 1977 Ct90 parts


> Hello,
>
> I was referenced by a friend to try out your guys' website. He said you guys
> were the best!
So I guess ill give it a shot.
>
> I need to get a rear rim for a 1977 Honda Ct90 Trail bike. If you have this
> part I would be deeply grateful if you contacted me through email with a
> quote and the condition of the part. Thank you for your time..
>
> Julio Valdez


----- Original Message -----
From: "Chris Lee"
To: "bikeboneyard"
Sent: Monday, February 27, 2006 7:05 PM
Subject: parts and thanks
> Hello Brendan,
>
> First of all, I'd like to thank you for the parts I've bought from you
> for my 80 CanAm 250. I'm sure I'll be buying more as the need arises.
>
> Second, I waste WAY too much time looking through your seemingly
> endless supply of bikes and parts. Truly amazing.

>
> Now, my brother in California has built a bike he calls "Honzuki". Its
> a CR 125 frame with an old Suzuki 370 (?) two stroke engine. Crazy, I
> know. He thinks that if he could find a rear mono spring from a CR
> 250, it would help his suspension woes. Would this work, and do you
> have one? If I remember correctly, the frame is mid-eighties. I'll
> get the exact info if this is something that could work.
>
> Thanks again,
>
> Chris
> Albuquerque


----- Original Message -----
From: Beth Scherer
To: bikeboneyard
Sent: Sunday, February 27, 2005 3:22 PM
Subject: Re: Notification of Payment Received


Brendan,
I received the parts on Friday, Thank you!! they are great, you are always kind of unsure when buying used parts but you have proven you sell what you say, will do business again.
Doug Scherer


----- Original Message -----
From: Jim Griggs
To: bikeboneyard
Sent: Friday, February 24, 2006 9:37 PM
Subject: Re: Bassini Pipe Yamaha


Just wanted to let you know I got the parts in good condition. Want to thank you again for the help. JimG


----- Original Message -----
From: James Strawn
To: brendanf@bikeboneyard.com
Sent: Friday, February 24, 2006 12:53 PM
Subject: Looking For Parts For Yamaha IT200

Hello Brendan—

You come very highly recommended! Can you help me?

I'm looking all over for the right- and left- hand sidecovers, as well as the headlight/numberplate assembly for a Yamaha IT200... Any from years '84, '85, or '86 will do! If you don't have these parts, any idea of a salvage yard that might? I most sincerely appreciate any help you might be able to give.


THANKS FOR YOUR TIME!


----- Original Message -----
From: "Steve Searles"
To: brendanf@bikeboneyard.com
Sent: Wednesday, February 22, 2006 11:32 AM
Subject: Suzuki Katana


> Want to buy Gas Tank and Instrument cluster from the 93 Suzuki Katana 750. I
> need good dent free tank and speedo, tach & fuel gauges for a 1992 Suzuki
> Katana 750 I am rebuilding for a customer. Price sounds good @ $100 each if
> you will pay the shipping. I can payPal you or however you want to do it. I
> have been wanting to do business with you for a while and now I can. (You
> are getting a good reputation)
I have a shop in Marshall, MI and repair
> bikes all the time. Old stuff too. Let me know and I will get the money to
> you. Thanks!
>

----- Original Message -----
From: hogwheel
To: "bikeboneyard"
Sent: Friday, February 10, 2006 8:54 PM
Subject: Re: Re: rv125 rear wheel
> HELLO I REC. THE WHEEL TODAY,THANKS!I HAVE INSTALLED IT ON MY BIKE ,CHECK OUT ATTACHED PICTURE(DATE ON PIC. IS INCORRECT)THANKS AGAIN STEVE


----- Original Message -----
From: "William Green"
To:brendanf@bikeboneyard.com
Sent: Thursday, February 09, 2006 10:46 PM
Subject: kick starter


> hi brendan,got kick starter, perfect!!!!! thanks!!! I need parts for my
> cr 500, will call you next week,you can look me up at speedwaybikes.com
> ,socal riders. thanks again bill green.
>


----- Original Message -----
From: BThor27
To: brendanf@bikeboneyard.com
Sent: Thursday, February 09, 2006 4:45 PM
Subject: M-99


Hello Brendan

The Bultaco parts arrived today. Thanks I'm extremely pleased. I appreciate you including all the little bits with the wheels, and the petcock on the tank, a lot of guys would have nickel and dimed me. I will tell my friends about your site, and you can look forward to future business from me as well.

Take care, Erich Brock


----- Original Message -----
From: Don Pickett
To: bikeboneyard
Sent: Thursday, January 26, 2006 5:16 PM
Subject: Re: Honda side cover


Hey Brendan. Side cover arrived today. No damage.
Thanks much.


Don


----- Original Message -----
From: bob fredette
To: brendanf@montana.com
Sent: Tuesday, January 24, 2006 8:11 AM
Subject: Re: Super Combat Side Cases from AZ Bob

Brendan: I got my box of Super Combat parts & was pleasantly surprised. You tossed in a few things not even mentioned & I just wanted to thx you for that. You've been a great seller & I appreciate your fairness, honest, integrity & great service. Thanks for the extra parts & the excellent communication along the way. Regards, Bob


----- Original Message -----
From: Jack Gardner
To: bikeboneyard
Sent: Monday, January 23, 2006 9:39 PM
Subject: Re: Husky


Im sure a 76 will work from a 250 even. as long as it is a 36 hole for the conical hub and not the for the WR silver hub that looks like the 125 style hub.

I unwrapped the pipe about an hour ago, Its perfect, thanks!!!!


Jack

----- Original Message -----
From: STEVE LASLEY
To: brendanf@bikeboneyard.com
Sent: Sunday, January 22, 2006 4:07 PM
Subject: 71 Yamaha RT-1 360 Enduro

Hello, I am interested in the gas tank off the 71 RT-1 you have listed. Can you check condition and email back if it's still available? Also would be interested in a cylinder off the same engine. Thanks for all the parts you sold me in the past it's a big help. Regards... Steve-----

----- Original Message -----
From: rexermoto@aol.com
To: brendanf@montana.com
Sent: Thursday, January 19, 2006 9:48 AM
Subject: Re: Notification of Payment Received


Brendan,
I received the muffler for the xt500 yesterday, thanks for the prompt shipping. It looks good for being 30yrs. old. I have a buddy that is looking for an exhaust off of a Yamaha it465 or it490 not sure of the year. Do you have anything like that? Let me know. Thanks. Kirk



--- Original Message -----
From: halvors5@tmcc.nevada.edu
To: brendanf@bikeboneyard.com
Sent: Monday, January 16, 2006 11:21 PM


> Brendan, the exhaust for the kx250 fits excellently. With a little
> craftsmanship, and luck, it will work great. Just wanted to say thank you, and
> I will let evryone in MRANN racing know about the Bikebonyard.



> ----- Original Message -----
From: Clark Smith
To: bikeboneyard
Sent: Wednesday, January 11, 2006 6:14 PM
Subject: Re: big bear carb and fender bracket


Hi Brendan,

got the parts today. Thank you. You will hear from me and my friends again. All the best in the new year.


----- Original Message -----
From: Ryan Hulon
To: brendanf@bikeboneyard.com Sent: Wednesday, January 11, 2006 12:21 PM


i recieved the brake pedal and it is exactly what i needed. thank you very much for your help!!


----- Original Message -----
From: earthman
To: Rick Ticknor ; bikeboneyard
Sent: Thursday, January 05, 2006 2:20 AM
Subject: thank YOU Brendan and Rick !!!!!!!!!


Without your help, this wouldn't have been possible. You guys are appreciated very much.

Jim Klones

Look at that seat! Wow! :-) ----- Original Message -----
From: Ruggdaddy3@aol.com
To: brendanf@bikeboneyard.com
Sent: Tuesday, December 27, 2005 9:35 AM
Subject: Shocks


I am looking for rear shocks for my 1980 KDX 400 I ve bought some parts from you a couple of years ago and they very well.All so i need a clutch handle and perch


----- Original Message -----
From: Ken F
To: brendanf@bikeboneyard.com
Sent: Monday, December 26, 2005 9:06 AM
Subject: YAMAHA DS7


Thanks again Brendan for the great deal and the help with delivery on the bike, to other customers, this guy is the best in the business and we need more people

Like him that you can trust, check with him first before you buy anywhere else on the internet, Thanks again


----- Original Message -----
From: Donald Main
To: bikeboneyard
Sent: Tuesday, December 20, 2005 8:52 AM
Subject: Re: Right hand side cover


Hi, this is Don Main.

Just a note to let you know the black side cover for my son's Honda CM400 came through the mail just fine. We thank you for your prompt service and will remember you for future needs for ourselves and a friend with an identical bike.

Thanks again, and merry Christmas!


----- Original Message -----
From: Mike & Darylann Wilson
To: bikeboneyard
Sent: Thursday, December 22, 2005 2:28 PM
Subject: Re: Notification of Payment Received


Hi Brendan, I received the lower end today. It is a nice unit, thanks much for your help..........Mike


----- Original Message -----
From: boxfan23
To: brendanf@bikeboneyard.com
Sent: Wednesday, December 21, 2005 9:27 PM
Subject: ATC70 Or CT70


Hi,

A friend of mine refered me to you. Said you got great deals. Anyway I am looking for a ATC70 engine or a CT70 engine. I dont care what year or if they run. Just as long as they are complete. Bottom,Head,Cylinder!!. Let me know if you have these. Thanks again!!!


----- Original Message -----
From: Ryan Hulon
To: brendanf@bikeboneyard.com
Sent: Friday, December 16, 2005 5:06 PM
Subject: Yamaha RX-50


I have a yamaha rx 50 and I definitely need some parts. I for sure need a brake pedal and a seat. You have the lowest prices that I have seen, and it would be great to be able to get these parts.


----- Original Message -----
From: David Magee
To: bikeboneyard
Sent: Wednesday, December 14, 2005 4:29 PM
Subject: Re: honda rear end


Got it on Tuesday, dropped it at the shop and they think it's a winner. Thank You. Have a Happy Holiday.


From: Ryan Morgan
To: bikeboneyard
Sent: Monday, December 12, 2005 10:40 PM
Subject: Re:



NO PROBLEM I WILL RECOMMEND MY FRIENDS TO YOU, AND ILL KEEP GETTING PARTS FROM YOU
bikeboneyard wrote:


----- Original Message -----
From: "Chris McIlwain"
To: brendanf@bikeboneyard.com
Sent: Saturday, December 10, 2005 5:33 PM
Subject: Parts


> Hi Brendan:
> I received the Ct1 forks and they are nice Thanks.I would like the VIN
> of the Powder Coated Can-Am frame and swing arm. Are they in real good
> shape,Unchipped,straight,no missing brackets? how much for them with
> shipping to 32726.
> Chris in Florida


----- Original Message -----
From: Becki Merry
To: brendanf@montana.com
Sent: Thursday, December 08, 2005 6:11 PM
Subject: Re: maico 250 1975


Thank you I'll look forward to doing more business with you in the future


----- Original Message -----
From: Chu522
To: brendanf@montana.com
Sent: Wednesday, December 07, 2005 3:15 PM
Subject: Re: Mark`s Motorcycle Swapmeet at CALVMX.com


Thanks Brendan, for keeping me informed about the kick starter for that 79 YZ 125....
As for the airbox cover.... It seems that I keep finding air boxes without a cover....oh well..
Anyway, Give me a total with shipping, and I'll get another money order out to you.

BY THE WAY... This is the first time I've gotten any parts from you, and just wanted to let you know that it has been a pleasure..... I'll Be In Touch.... Dave Hurley... Happy Holidays!!


----- Original Message -----
From: "Chris Lee"
To: "bikeboneyard"
Sent: Friday, December 02, 2005 5:10 PM
Subject: shocks


> hey brendan,
>
> i put the shocks on the bike last weekend. they are great.
>
> thanks again,

>
> chris


----- Original Message -----
From: TYPECORARO
To: brendanf@montana.com
Sent: Friday, December 02, 2005 3:21 PM
Subject: Re:KTM Penton FOX shocks


Hey Brenden, Thank you for the hook up with the Yamaha motor it was breaking my heart I thought for sure that bike was done for . I'm interested in the stock shocks you have to offer for the Penton KTM . would it be possible if not to much trouble to send me a Email picture of them. Do you have by chance a set of old Fox shocks. The type that the spring was inside the cylinder. The restoration project I'm doing turned out perfect and the only thing left are the rear shocks. Something unique would really finish the project nicely. By the way have you ever heard of people leaving out the omni phase balancer and balancing the crank instead it seems that in doing so would eliminate a lot of centrifugal weight possibly improving the performance of the engine?Just a thought . again thank you for your help. sincerely Ty Pecoraro


----- Original Message -----
From: karl landrus
To: brendanf@bikeboneyard.com
Sent: Saturday, November 19, 2005 12:07 PM
Subject: 76 hodaka wombat


Brenden,
I just got that xr 200 r triple from you and it just what I wanted Thanks! Also about your 76 wombat bottom end, is this the on that has two motor mounts on the front? because I am trying to locate one. I am new to hodakas but this year is called a 03. If this has the two motor mount up front I am intrested in this and the clutch. As you know I live in Spokane an if you could give me a figure for the bottom end, clutch and shipping I would paypal you. Thanks Karl Landrus


----- Original Message -----
From: Dave Schram
To: brendanf@bikeboneyard.com
Sent: Tuesday, November 15, 2005 8:11 AM
Subject: 1985 XL350 PARTS
Brendan
Thanks for the XR seat its fits great and is in good shape. Can you help me with both side panels, chain guard, shifter lever, and buddy pegs ?
Dave


----- Original Message -----
From: Ianhip@aol.com
To: brendanf@montana.com
Sent: Tuesday, November 15, 2005 6:24 AM
Subject: 74' F9 350 Parts
Dear Brendan:
We received the parts you sent and were very pleased. Do you currently have, or could you get, the following parts for this bike?:
1) Lower end
2) Headlight assembly
3) Taillight assembly
We are trying to finish the bike and would appreciate any help you could provide.
Thank you for your assistance.
Respectfully,
Ian Hippolyte


----- Original Message -----
From: FORDY2DR
To: brendanf@montana.com
Sent: Sunday, November 13, 2005 4:17 PM
Subject: Re: 1975 RM125


Thanks Brendan, They look great!

Tom McAllister


----- Original Message -----
From: Flathdjack
To: brendanf@montana.com
Sent: Sunday, November 13, 2005 12:34 AM
Subject: Re: 71thru 73 carb mounts


hi brendan, i safely recd. the carb mounts today, sat.nov. 12th, they're perfect, and thanks for the extra clamp, you didn't have to do that as the bent one is easy to fix, but i sure appreciate it anyway, and thanks for the quick delivery, your the best, man. best regards, jack.


----- Original Message -----
From: chipg1
To: brendanf@bikeboneyard.com
Sent: Friday, November 11, 2005 6:16 PM
Subject: Sachs moped


Brendan, looks like something can be worked out with the exhaust pipe. Even on the other side. It won't be stock, but close. Thank you for the part. Do you have a gas cap by any chance? This moped is a Sachs Prima. It is a chrome cap. I would think they made them all the same. The moped is a 1980. I really like dealing with you and refer you to anybody that needs parts. Thank you for your service and thanks for all the replies when I have e-mailed you! They have always been prompt! Great service!

Troy Swokowski


----- Original Message -----
From: Ray Green
To: brendanf@bikeboneyard.com
Sent: Friday, November 11, 2005 4:50 PM
Subject: Yamaha Omaha trail 50


Brendan,
I found the site that I got the Yamaha Omaha trail 50 brochure photo on. It is e-tabitha.com. There are quite a few photos of other obscure bikes (smaller bikes) there. Go to the Yamaha brochures near the bottom. You can save specific ones and print or forward.
Thanks for the tour of your place - great to know you are out there. Jim Griggs was thrilled with the Yamaha exhaust pipe and the Bridgestone parts were just what I needed. If you ever come across a good 100TMX Bridgesone, let me know. I will be in contact regarding other parts needs. I will be sure to get your web site posted in our vintage newsletter so others can see what you have.

Have a great Thanksgiving.

Ray Green
Billings


----- Original Message -----
From: "Verne Antrim"
To: brendanf@bikeboneyard.com
Sent: Friday, November 11, 2005 7:26 AM
Subject: order received


> Hi there
>
> I got my carbs yesterday for the 1982 Suzuki, I am very happy with them,
> they looked great.
I also sent out a money order yesterday for the exhaust
> pipes and muffler for the same bike, you should receive it in a few days so
> if you could get them packaged up , I would appreciate it.
>
> Thanks again for the fast service
>
> Vern Antrim


----- Original Message -----
From: Vern Antrim
To: 'bikeboneyard'
Sent: Sunday, November 06, 2005 7:03 PM
Subject: RE: 1982 Suzuki GS1100 l


Great, thanks, I will be ordering them this week, you do good work!!!


----- Original Message -----
From: John Shealy
To: bikeboneyard
Sent: Friday, November 04, 2005 8:41 AM
Subject: Re: cm400
Hi Brendan,
I got the Stator(1980 cm400t) yesterday and it works great. Thanks.


----- Original Message -----
From: ANDREW BRODEY
To: brendanf@montana.com
Sent: Saturday, October 29, 2005 1:28 AM
Subject: Re: XS1100 Crash Bars

BRENDAN, RECEIVED - THANK YOU VERY MUCH.

Andrew


----- Original Message -----
From: "Chris McIlwain"
To:brendanf@bikeboneyard.com
Sent: Tuesday, October 25, 2005 1:03 PM
Subject: WEB SITE


> Hi Brendon:
> I just spent some time browsing your site and was especially impressed
> with your boneyard critters,I Just want you to know that anyone with a
> heart for the critters like you have will get ALL the business I can
> send your way.

> GOD BLESS and THANK YOU
> Chris in FLA.
>

From: Ed Mcmillan
To: brendanf@bikeboneyard.com
Sent: Tuesday, October 25, 2005 8:37 AM
Subject: Kawasaki 175 F7

Good Morning Brendan,
Just wondering if you have a smooth shifting motor. I have one that 2nd gear and a shifting fork have gone out on.
Also, still got that throttle cable for it too?
We are still loving riding that Yamaha yz with the Honda SL125 motor in it we got from you.

Thanks Ed McMillan


----- Original Message -----
From: theblayde@netzero.com
To: brendanf@montana.com
Sent: Tuesday, October 18, 2005 3:57 AM
Subject: Re: atr
Brenda
I recieved the head. My son and I am very pleased. Thank You very muck. I will direct all my friends to check out your website.
Thanks again you have made a young man very happy.


Blayde


----- Original Message -----
From: "tim haitzy"
To: brendaf@montana.com
Sent: Wednesday, October 05, 2005 3:40 PM
Subject: Re: sl parts

> > Hey Brenda, The taillight assem worked out great.I saw you have side panel
> list for a 71 sl .I need a battery side panel??? I also need a left side
> mirror and a sift lever.If you have any of these items which ones and how
> much would be great. Thanks Tim
>

----- Original Message -----
From: Nick Pausch
To: bikeboneyard
Sent: Tuesday, October 04, 2005 4:19 PM
Subject: Re: Honda CB-125S


hey so i checked like you said and there is was
"Honda SL125 Carburetor Brand New SL 125 CB CL"
I appreciate all your assistance and even though i didnt get to buy anything from you directly will definately recomend you to my friends for their motorcycle part needs.

again Thankyou very much!

you are a valueable resource.



----- Original Message -----
From: Rodney McIntosh
To: bikeboneyard
Sent: Monday, October 03, 2005 7:26 PM
Subject: Re: Payment for Stator cover


Brenda,
I received the stator cover today and it works great. Thanks.
Did you say that you had the ring and pinion for that honda 250 three wheeler? I think you quoted me $100 for that plus shipping of $10. If so, I would like to get that from you as well. One question, will you be sending just the ring and pinion or the entire third member?
Last thing, I would like to keep an extra stator cover around in the event I drop the bike again. If you have another one (fits 98 katana 750) I would like to buy that from you as well.
Let me know,
Rodney


----- Original Message -----
From: Your Buddy Bob Scarborough
To: 'bikeboneyard'
Sent: Thursday, September 29, 2005 10:10 AM
Subject: RE: Notification of payment received


Cool Brenda. I ordered my bike from http://www.motorcycle-brokers.com/ and they said it will be 3-4 weeks, so I have plenty of time to get the parts from recluse. Thanks again for the great service and price. I will be happy to brag you up to my riding buddy’s on our next ride. Good job. Bob


----- Original Message -----
From: mark
To: bikeboneyard
Sent: Wednesday, September 28, 2005 8:56 PM
Subject: Re: Notification of Payment Received


I received my Maico side case/ignition cover/whatever today. I'm sure glad we were able to work that out. I just want to say THANKS for the fast service and patience dealing with Maico terminology with me. I'll be shopping with you guys again in the future and will tell my friends about you. Thanks again.


----- Original Message -----
From: "JOHN BLACK"
To: brendaf@bikeboneyard.com
Sent: Tuesday, September 27, 2005 5:58 PM
Subject: THANK YOU


> Just wanted to let you know that I received my mt250 parts today and I am
> very pleased. Thanks for the great service!
I `m looking for a side panel
> and license plate bracket for a 73-74 mt250 if you have or find these items
> let me know. Once again, Thank you! John Black
>

----- Original Message ----- From: "Wayne Lucy Bamford"
To: brendaf@bikeboneyard.com
Sent: Monday, September 26, 2005 6:18 PM
Subject: 1997 Triumph Trophy Mufflers


> Hi Brenda,
> Received the mufflers today and they arrived in great shape. Thanks for your help. I'm still looking for a right handlebar for my 99 Trophy or would be willing to take a pair just in case something shows up there in the near future. Pleasure doing business with you.
> Wayne


----- Original Message -----
From: DENNIS
To: brendaf@bikeboneyard.com
Sent: Saturday, September 24, 2005 3:50 PM
Subject: thank you
Brenda thanks for the regulator it was a great price and it works beautiful.
i need to ask yopu about the front brake master cyclinder is it in good shape
and are the spedo and the tach in good shape
and the top fairing is that the whole front fairing without the windscreen
what color is it
let me know
i will be ordering more parts for my goldwing
thanks
Dennis
----- Original Message -----
From: Brian Brodt
To: brendaf@bikeboneyard.com
Sent: Thursday, September 22, 2005 1:51 PM
Subject: 1981 Yamaha IT175 parts
Brenda,
I received the gas tank and the front wheel yesterday. Thanks for your quick response.
I am now looking for the following 1981 IT175 parts
front brake cable
rear fender
right hand side - side cover ( the one that goes over the exhaust pipe)
exhaust pipe - ( off the motor )depending on condition
Intake manifold - on your parts listing it says intake manifold - Is this just the rubber mount from the cylinder to carb or does it include the
reeds as well?
Regards,
Brian Brodt


----- Original Message -----
From: Broncspud@aol.com
To: brendaf@bikeboneyard.com
Sent: Thursday, September 22, 2005 6:51 PM
Subject: 1984 Honda elite Ch 125


I want to thank you I received the gas tank yesterday and it looks great I also need the solenoid and a battery box do you have either one available?

Thank You
Sheldon Dean
Broncspud@aol.com


----- Original Message -----
From: Julian Lopez
To: brendaf@bikeboneyard.com
Sent: Wednesday, September 21, 2005 9:36 PM
Subject: purchase


hey brenda thanks heaps got my air box and kick starter today,,,,,very happy. i am looking for a yz 125c fuel tank to make up a hl500 replica, can u keep your eye out for me . cant seem to find one here. i think some yz 80 tanks are similar.. thanks again cheers julian ... well talk soon


----- Original Message -----
From: Johncarden64@aol.com
To: brendaf@bikeboneyard.com
Sent: Friday, September 16, 2005 1:03 PM
Subject: 1977 Kawasaki KZ400 Axle


Brenda,
I received the axle Thursday pm and installed it this morning. Thank you for the excellent service. Have a great day.
John


----- Original Message -----
From: "Melanie L Rhein"
To: brendaf@bikeboneyard.com
Sent: Friday, September 16, 2005 7:20 AM
Subject: Overdue thank you


> Brenda,
>
> We purchased a hard-to-find part for a customer's bike in Aug. You were
> so helpful on the phone, service couldn't have been better, and the part
> worked beautifully. You've added another repeat customer to your list.
>
> Many thanks,

>
> Melanie R.
> Vermont


----- Original Message -----
From: Gerald Seldal
To: brendaf@bikeboneyard.com
Sent: Sunday, September 11, 2005 12:25 PM
Subject: 1979 can am qualifier III 370


dear sir, seeking the follwing for a 1979 can am 370:
*magura type front brake/clutch lever perches 90% or better.
*clutch cover. no welds or cracks.
*you have a set of 1980 can am quailifier side panels. what shape are they in?
*i have purchased a set of forks from in the past. they are excellent.!!
* any can am parts resources you now of?
thanks, jerry. oak lawn, illinois


----- Original Message -----
From: Wetzel, Phil
To: bikeboneyard
Sent: Friday, September 09, 2005 11:08 AM
Subject: RE: Looking for 1980 YZ250 parts....


OK, thanks. My compliments on the website BTW. Simple, but extensive.
Before I emailed you I did go through it, pondering if I could make that year
work with my bike.
I pondered over the YZ-250 (85 I think?) that needs a top-end rebuild.
My top-end was recently done. But, shipping would probably be a killer!
Thanks for replying.
My quest goes on.
Phil



----- Original Message -----
From: "Kevin Clark"
To: brendaf@bikeboneyard.com
Sent: Thursday, September 08, 2005 1:37 PM
Subject: Honda cb550


> I am interested in buying a Honda cb 550 rolling frame
> or one with a bad engine and any other parts. I have
> a mid 70s cb550 engine and want to finish building up
> the bike. I saw you have a 75 cb-550f and a 75
> cb-550k one your list. What is the differences
> between the 'f' and 'k'. I live in Bozeman and going
> to Missoula to get a bike is not a problem at all. My
> friend Nate has bought frames from you before and
> recommended you highly.

>
> Kevin Clark

-
---- Original Message -----
From: DJCHARLEY79@aol.com
To: brendaf@bikeboneyard.com
Sent: Friday, September 02, 2005 6:11 PM
Subject: on a1971'cl-100honda .


i need some how to keep in touch , i now have three bike's beside's this one, and all need help, first is the cl-100 that i got out of a back shed,
the engine was run hard and siezed, that's now being rebuild . i was thumbing through your list and found the one on cl-s, and need the work's, i also have the blue tank bike! what;s confusing is the previeue's owner had replaced cl-part's
with sl-part's so i did'ant know what it was that i had, the other bike i got is a 1977or a 1978 mr-175 honda that need's the work's , the bike has elsinore pipe on and fuel tank, i would like to get back to stock with the bike , and i still have my yamaha ct-3 enduro , i like what i'am doing it work's for me finding jewels
, ,i like your site cause you can move down to what it is you need , and you have picture's of what it is you got
,n eed all the cable's for the cl-100. i will be more dilagent in my need's with my bike's , from djcharley79


----- Original Message -----
From: "Jim Manning"
To: "bikeboneyard"
Sent: Thursday, September 01, 2005 7:21 PM
Subject: Re: Honda CB360T


> Parts were perfect!
>
> you the man!

>
> Jim


----- Original Message -----
From: Beaches249@aol.com
To: brendanf@bikeboneyard.com
Sent: Sunday, August 28, 2005 10:16 AM
Subject: (no subject)


Brendan,

Couple weeks ago I ordered a chain guard for 1975 honda mt 250, It worked great! Know I have noticed since I put it on that their are still a couple of bolt holes in the swingharm, I think their must be another bracket for the chain to ride on or a tensioner or something, can you help me out?

Thanks,
Matt Reidenauer


----- Original Message -----
From: Jay E. Russo
To: brendanf@bikeboneyard.com
Sent: Wednesday, August 24, 2005 8:32 AM
Subject: engine guard


Brendan,
About a year ago I purchased a front and rear wheel off of you for a 1978 CB750K of which I was very much pleased with.

I am writing to you to see if you have several items. An engine guard, hard saddle bags, left side operator foot peg, sissy bar with luggage carrier, 4 into 4 exhaust engine back with all mounting hardware.

If you have these items could you e-mail pictures so that I may see the condition of the items.

Sincerely,
Jay E. Russo


----- Original Message -----
From: earthman
To: Rob and MaryPat Mitton
Cc: bikeboneyard
Sent: Monday, August 22, 2005 12:21 PM
Subject: Re: motorcycle restoration/repair shop selling rare 1964 CL72 Honda - $750


Hi Rob,

Hmmmmm, we would contact Brendan at www.bikeboneyard.com for that one! Great guy to deal with and always the best prices!

Jim and Brandon @ Brandon's Bikewerks


----- Original Message -----
From: Brian Hemmings
To: brendanf@montana.com
Sent: Monday, August 22, 2005 5:03 AM
Subject: Re: Honda CB160 Parts, carbs & coil.


Hi Brendan

Just to let you know i have received the carbs & coil ok, & the carbs have cured all the running problems that i have had with the bike, thank you very much for all your help look foreward to dealing with you again in the future.

All the best

Brian.


----- Original Message -----
From: Otto Mackrodt - Natec
To: bikeboneyard
Sent: Saturday, August 20, 2005 8:45 AM
Subject: Re: Old Bikes Parts for Brazil


Hi Brendan,

I read in your page you are out for august.
I just want to thank you for the goods you sent. They were arrived just yesterday, but everything went with no trouble
Thank You very much.

In september I´ll contact you for other parts.

Best Regards,
Otto (from Brazil).



----- Original Message -----
From: Debbie Clark
To: brendanf@bikeboneyard.com
Sent: Friday, August 19, 2005 8:42 AM
Subject: bultaco alpina parts


I'm putting together a 74 alpina. I saw several parts on your website I'm interested in. The tank and seat base, rear wheel (does it come with the break assembly and axle?) and forks (does it include the triple tree for mounting to the frame? Do you still have them? If so, can you send me pictures? We've bought from you before and were happy with what we got.
Thanks,
Kelly Clark


----- Original Message -----
From: Sandra Bernklau
To: brendanf@bikeboneyard.com
Sent: Monday, August 15, 2005 9:05 PM
Subject: exhaust 1981 kawasaki csr 650 4cyd


Dear Bikebone yard,
have had success for you previously with parts thanks, but now I need exhaust for my 1981 kawasaki csr 650 4cyd. I would like to find the original one if possible if not no big deal or if you have a used header in good shape would be fine 4 to 1 or 4 to 2????

please respond thanks

Andrew
Chicago,il


----- Original Message -----
From: Comcast Mail
To: bikeboneyard
Sent: Saturday, August 06, 2005 1:09 PM
Subject: 80 can am 400 QIII


Brendan, the rear wheel you sold me works great!

I need a kick start lever for my 80 can am 400 QIII. Do you have any and how much.

Also any original plastic front fenders in nice shape?

Thanks,
Mark Miller


----- Original Message -----
From: Cathy&Eric
To: brendanf@bikeboneyard.com
Sent: Wednesday, August 03, 2005 8:33 AM
Subject: 1972 xl 250 parts
Hello Brendan
Got some stuff from you in the past and was pleased with all my parts (ebay sucks)
1972 Honda xl 250
Looking for some small parts but they would help me get this thing registered and on the road:
Left handlebar control switch (turn signal and horn )
Chain guard
Turn signal relay
Choke button and cable
Speedo cable
1 hand full of misc nuts and bolts (those things are hard to find)
Seat latch – The part that goes on the seat and the guts to the lock assy
I know these parts are hardly worth your time but I sure could use them. Let me know what you have and shipping of same and I will buy them
Thanks
ERIC


----- Original Message -----
From: "steven murphy" smurphy999@hotmail.com
To: brendanf@montana.com
Sent: Tuesday, August 02, 2005 4:26 PM
Subject: Re: 75 honda cl360 coils


> got the coil in yesterday.. god damn you guys rock!!!!
>

----- Original Message -----
From: "Verne Antrim"
To: brendanf@bikeboneyard.com
Sent: Thursday, July 28, 2005 8:46 AM
Subject: parts


> Hey There
>
> Just a note to say thanks, I got my Suzuki parts in yesterday, they look
> great. I will be in touch soon for more. I will be sure to pass your name
> out to friends here in Florida.

>
> Have a great day
>
> Vern Antrim


----- Original Message -----
From: "brenda bowers"
To: brendanf@bikeboneyard.com
Sent: Tuesday, July 26, 2005 5:04 PM
Subject: 1975 Yamaha mx400B


> Brendan,
> I am in need of working electrical components for
> my 75`mx400B Yamaha.Items I need are a stator,cdi
> box,coil,flywheel and maybe a pipe if it`s in good
> shape.I cross referenced the cdi box and supposedly a
> 74`DT360A,75`DT400B,76`YZ400C-IT400C and DT400C are
> all the same.I`m not sure about the stator and coil
> but I would guess that they would be the same also.I`m
> sure that you know more about this than I do.Also a
> pipe from a 75`MX250B is the same as the 400.I noticed
> in your inventory you had these items listed but I
> didn`t know how current it was.The last time I
> purchased items from you for my DT250 they were in
> great shape and shipped on time.Good service is the
> reason for this email.
When you get the chance let me
> know what you`ve found and the cost including shipping
> to Orlando,Fl.32825
> Thanks,
> Vance Bowers
>
>

----- Original Message -----
From: Michael D Belluomo
To: brendanf@bikeboneyard.com
Sent: Sunday, July 24, 2005 10:52 AM
Subject: Yamaha AT2 parts needed!


Brendan,

I've bought from you in the past...maybe a few years ago I bought a set of XS1100 carbs. Anyway you did me right and now I am in need of some other parts for me 1972 Yamaha AT2 that I am trying to get running. Alot of the electrical parts on it are badly corroded. Do you happen to have the magneto assembly for this bike? If you can make me a good deal, perhaps I may be interested in other engine parts if they are in really usable shape. Anyway you can send me an answer when you get time. Also send a response to my work email as well at:

Thanks for your time. I look forward to hearing from you.

Take care,

Mike Belluomo
Wichita, Kansas


----- Original Message -----
From: Tasia Crawford
To: brendanf@bikeboneyard.com
Sent: Sunday, July 24, 2005 9:46 AM
Subject: thanks / fuel tank


Thanks for all the help you gave me with the last order with the cdi box,now my katana runs i noticed i have a hole in my fuel tank and of course more problems, so what kinda condition is the fuel tank that you have in, does it come with sender and pet cock and is there any kinda junk inside the tank or is it completely clean inside, thanks again brendan

jesse
93 katana 600


----- Original Message -----
From: lefthander
To: bikeboneyard
Sent: Friday, July 22, 2005 2:35 PM
Subject: Re: 1986 honda 4 wheeler 350 fourtrax


got the part in just 1 week from the time i sent the money order. got it in the machine and its working just fine. will be doing business with you again if i need something. put this on your satisfied customer if you want to.... lefthander@planetc.com. thanks again.. ron


----- Original Message -----
From: "karen hunter"
To: brendanf@montana.com
Sent: Tuesday, July 19, 2005 3:33 PM
Subject: Re: MSN-Request: 1982 Kawasaki k11


> We recieved the fuel tank and are very happy with it.Thank you so much for
> your help and speedy service.We will be calling you for more things as
> needed.Thanks again,Karen and JImmy Hunter of Tennessee



----- Original Message -----
From: "The Commish"
To: "bikeboneyard"
Sent: Tuesday, July 19, 2005 6:26 PM
Subject: Re: Notification of Payment Received


> Hi,
> Got the pipes yesterday. Very nice!
> I see you have a seat listed. What condition is it in?
> I also need an undented oil tank cover, rear foot
> pegs, and a decent kickstarter. Got any of these?
> Thanks again,
> Bruce
>

----- Original Message -----
From: Marcus Sullivan
To: bikeboneyard
Sent: Tuesday, July 19, 2005 4:47 PM
Subject: Honda Goldwing (78) Exhaust


Brendan

I need an exhaust system for my 78 Honda Goldwing. (I dented one side the right hitting a handicap sidewalk ramp in town. Let me know if you have one.

Thanks

Marcus Sullivan
msull@omniglobal.net
PS: The rectifier you sent me worked great. Thanks again.


----- Original Message -----
From: "Kelly Adams"
To: brendanf@bikeboneyard.com
Sent: Monday, July 18, 2005 4:44 PM
Subject: thank you


> hi i got the kick starter for my yz125 thank you i
> hope to buy from you again sometime
.also would you
> maybe have a frame for a 1990 cr500 honda.thanks jim



----- Original Message -----
From: ROSEMARIE CARTER
To: brendanf@bikeboneyard.com
Sent: Monday, July 18, 2005 1:11 PM
Subject: 1981 rm 125 clutch


thank you very much for the clutch. it is all there and i am very happy with it. Your service was excellent. If I need any other parts I will definatley come to you first. i will also spread the good word.


----- Original Message -----
From: "Stephenson, Jerry"
To: brendanf@bikeboneyard.com
Sent: Thursday, July 14, 2005 8:31 AM
Subject: 1978 Yamaha 750SE


> Hello Bendan,
>
> Got the front brake master cylinder and it works good. Thanks.
>
> Now I need a flasher relay for the same bike. Can you help?
>

----- Original Message -----
From: "dave bryant"
To:brendanf@bikeboneyard.com
Sent: Tuesday, July 12, 2005 5:11 PM
Subject: bul 220


> hi,
> i bought a bul 220 wheel from you a while back. very
> good!
do you still have the 220 swing arm and airbox?
> thks
> dave in nc


----- Original Message -----
From: Loyd Bishop
To: bikeboneyard
Sent: Monday, July 11, 2005 5:08 PM
Subject: Horn thing


Hello Brendan. Got the Honda SL100 horn switch and housing today. Beautiful! Looks better than the light switch on the opposite side of the handlebars! Thanks for the part. Believe it or not, I tell people about the "Boneyard". I will be calling again, on my next restoration


----- Original Message -----
From: bo_knows88@comcast.net
To: brendanf@montana.com
Sent: Saturday, July 09, 2005 5:06 PM
Subject: 1981 Suzuki GS650 GL


Hello!
you come highly recamended from my brother who has done som bussness with you (i_am_eab@hotmail.com) im looking for carbs for a 1981 suzuki GS650 GL (i need all 4) if you can price those for me including shipping to indianapolis that would be great


----- Original Message -----
From: shawn
To: brendanf@bikeboneyard.com
Sent: Sunday, July 10, 2005 9:49 AM
Subject: 80/81 honda cr 80


Hello
I am interested in some of the parts you have listed for a 1981 Honda cr 80. I wanted confirm you still have the tank, and I also need the rear fender and some other stuff such as the fasteners and inserts for the shocks. Can you check what parts you have and let me know?

I also have access to some old bikes that still have alot of good parts.
I was happy to find your website and have sent it to a few friends one of which owns a cycle repair shop.
we have several projects were working on so I'm sure we'll do business.

your site is easy to use, I like the way your inventory on each bike is listed.


Thank you for your time and help on this matter.


----- Original Message -----
From: SmthinXtra@aol.com
To: brendanf@montana.com
Sent: Thursday, July 07, 2005 9:05 AM
Subject: RM125 TANK


Brendan, Received the tank... Many Thanks....Rusty


----- Original Message -----
From: "Big Prez" bigprez@gmail.com
To: "bikeboneyard" brendanf@montana.com
Sent: Thursday, July 07, 2005 9:43 AM
Subject: Re: 80 kz-650 LTD Parts


> Hi,
>
> Sorry for my delay. I have received the exhaust. Everything look
> great. I want to thank you for your assistance.
Did you have the
> opportunity to take closer shots of the bike so that I may be able to
> see other parts that I may need?
>
> Thanks,
>
> Rich Kessler
>

----- Original Message -----
From: "Stephen Thompson" stephen__thompson@hotmail.com
To: brendanf@bikeboneyard.com
Sent: Tuesday, July 05, 2005 4:36 PM
Subject: parts for a cl360


> Hi,
> My name is Steve Thompson. I bought some parts for a cb550f from you
> about a month ago and was very pleased with my experience.
I now need a
> working coil for a '75 honda cl360. Mine has a good one on the right and a
> bad one on the left. If you have the part I would like it if you could send
> me a paypal payrequest like you sent me last time. If this is possible I
> thank you very much and you have saved the day once again. Thanks!
>

Subject: recieved parts
From: "mel" melvinb@atmc.net
Date: Tue, July 5, 2005 8:36 pm
To: "Brendanf" brendanf@bikeboneyard.com
Brendan,
Recieved the parts today, everything looks good and should work out fine.
Thanks

Melvin Burns


----- Original Message -----
From: ajdavis007@comcast.net
To: bikeboneyard
Sent: Thursday, June 30, 2005 8:40 PM
Subject: Re: Hodaka engine swap



hey, got the engine today! looks great way above my expectations! thank you so much. another great deal from the bike bone yard! thanks again- andrew


----- Original Message -----
From: "Gary and Sandy Zang" lucky124@zoominternet.net
To: "bikeboneyard"
Sent: Wednesday, June 29, 2005 2:28 PM
Subject: Re: Mark`s Motorcycle Swapmeet at CALVMX.com


> Hi Brendan-I received the Honda CL-100 turn siginals today. They look great,
> just as you said.THANK YOU....Gary



----- Original Message -----
From: Ted Roberts
To: brendanf@montana.com
Sent: Thursday, June 30, 2005 6:47 AM
Subject: 1972 yamaha at2


Thanks for the parts they were great, and looked really good.

Do you have the throttle and throttle cables for the 1972 yamaha at2?


----- Original Message -----
From: "Sheffield Brian MSgt 16 ACCS/DOW"
To: "bikeboneyard"
Sent: Monday, June 27, 2005 7:02 PM
Subject: RE: MR/MT


> Those XL wheels worked out great on my MT.
> Thanks,
> Brian

>

---- Original Message -----
From: Loyd Bishop
To: bikeboneyard
Sent: Thursday, June 23, 2005 12:26 PM
Subject: Re: Honda speedometer


Thanks again, and I'll call again when I need more stuff! Pleasure doing business. I will send a picture of my SL100 when I am finished. I am going to tag it next year as an antique. I also have seven CT70's, of which all are the K0 models. I have restored and ride six of them, and will finish the seventh, when I get done with the SL100. Here are my first three


----- Original Message -----
From: godsmack4515@comcast.net
To: brendanf@bikeboneyard.com
Sent: Friday, June 17, 2005 1:02 PM
Subject: 86 kx 250


Hi, i was wondering if the 86 kx 250 was still being sold as a whole. If so, how much would it be to ship it to holland pennsylvania. Thanks

By the way, the suzuki tc 125 runs great thanks alot



----- Original Message -----
From: Cathy&Eric
To: brendanf@bikeboneyard.com
Sent: Friday, June 17, 2005 8:52 AM
Subject: 72 xl 250 motorsport


Hello Brendan,

I have ordered parts from you in the past and was pleased with the service. My new project is a 1972 (I think) Honda xl 250 motorsport. I am looking for



Coil

Throttle piece (the plastic twist part that the cable ends go into)

Tack and speedo

Front and rear turn signals

Air box and side cover for same and filter if one is in good shape

Seat latch and lock assy (and the part that goes on the seat pan)

Battery cover

Front chain guard

Coil and throttle piece are most important so I can see if this baby runs o.k.

Please let me know the cost of each part and aprox cost of shipping and if you have the parts in stock. Thanks!

Eric


----- Original Message -----
From: rene r. rery7777@yahoo.com
To: bikeboneyard
Sent: Tuesday, June 14, 2005 7:29 AM
Subject: Re: bikes


"Boneyard Brendan is the shit for hard to find parts!!!!!!" Cheers.


----- Original Message -----
From: Bjw1386@aol.com
To: brendanf@montana.com
Sent: Saturday, June 11, 2005 11:48 PM
Subject: Re: 3 wheeler parts


Thanks man... you've been great and quick and easy I appreciate everything, tell me
how to leave feedback on your site and I will definitely do it.



----- Original Message -----
From: The Brooks Family
To: bikeboneyard
Sent: Wednesday, June 08, 2005 7:45 AM
Subject: Re: Notification of Payment Received


We received them today. They look great! Thank you! Ann


----- Original Message -----
From: tim austin
To: brendanf@montana.com
Sent: Monday, June 06, 2005 10:10 AM
Subject: dt400


I received some parts from you a couple of weeks ago and I am very pleased with the condition of the parts and the prompt shipping. I still need a compression release mechanism for the Yamaha 400, and you list one as availible on a 1975 dt400. I don't remember seeing this bike listed before. (Maybe I just missed it) Do you have the comp. mechansim?



thanks

Tim


----- Original Message -----
From: Jeff Hastings
To: brendanf@bikeboneyard.com
Sent: Thursday, June 02, 2005 7:57 PM
Subject: '82 Suzuki GS1100L Headlight


Hey Brendan! I'm very interested in the headlight. Is it complete with all hardware?(Front piece, mounting rings, springs,etc.) Don't care about the bulb...

Let me know and we'll make the deal.

By the way, you've got a helluva operation going there and I'm not a little jealous. I've just spent an hour cruising your vintage metal and for me it's better than anything Hollywood puts out. My first bike ('66Suzuki BP120) was a boneyard special and all your pics look very familiar.



Thanks, Jeff

PS- Nice to see another biker cat lover!



----- Original Message -----
from:ajdavis007@comcast.net
To:brendanf@bikeboneyard.com
Sent: Tuesday, May 31, 2005 9:42 PM
Subject: Hodaka Super Combat 125 1974


> Hello, i am a returning customer who comes back to you once again for some more good service and great parts!
> I recently acquired a 1974 Hodaka Super Combat 125 to restore, after pulling the bike apart and tearing down the engine i found that this bike had very low hours! but i need a new piston and ring :( do you have them? i also could use a gas tank, rear fender, seat cover, fork springs, or whole forks, and some circlips if u have them. please get back to me asap! thanks so much- andrew
>
>

From: "Richard Bessey"
To: brendanf@bikeboneyard.com
Sent: Sunday, May 29, 2005 11:48 AM
Subject: KLX 250 parts


> Dear Bike Bone Yard,
> We purchased a CDI from you for a 1979 Kawasaki KLX 250. Installed the CDI
> and the bike has been running great ever since.

> So we have decided to get some more necessary parts.
> I was looking here:
> http://bikeboneyard.com/klx-250.html
> And we are interested in:
> Kick Starter $20.00
> Left Side stator cover $20.00
>
> We are also in need of the rear sprocket for it, is that availible, if so
> how much?
>
> Let us know on the sprocket and then we will get the money on its way for
> all of the parts.
>
> Regards,
> Richard Bessey


----- Original Message -----
From: BRIAN STEEN
To: bikeboneyard
Sent: Thursday, May 26, 2005 11:07 PM
Subject: Re: Order status


Thanks for the quick service. I just got the package today after I wrote you. Thanks for doing business.
Brian

----- Original Message -----
From: Tom's email
To: brendanf@bikeboneyard.com
Sent: Tuesday, May 24, 2005 7:46 AM


Again great parts, foot pegs exactly what I needed & the cost is more than fair! From now on, when I need a part, first I check the Boneyard, & then I look on E/Bay. Thanks again Brendan! Tom Burroughs



----- Original Message -----
From: "Richard Blakley" richard@stonehamblakley.com
To: "bikeboneyard"
Sent: Tuesday, May 17, 2005 1:40 PM
Subject: Re: Airboot description


> Brendan:
>
> I just mailed you a check for $21. Many thanks. You're a great source for
> NLA parts for both my '71 TS 185 and my '73 TS 125. Keep up the great
> service for us old dirt bike owners.

>
> Richard Blakley
>

----- Original Message -----
From: Bobby Nate
To: bikeboneyard
Sent: Sunday, May 15, 2005 1:44 PM
Subject: Re: CT3 parts


Hey Brendan Here is another praise for your web-site.

Everything you sent met my expectations. You definitely operate a trustworthy business. When it comes to vintage Yamaha, the Bone yard is a great place to look.



Thank you for the great parts.


__________________________________________________

----- Original Message -----
From: "Freddie L. Main, II" oilleak@charter.net
To: "bikeboneyard"
Sent: Monday, May 16, 2005 3:02 PM
Subject: Re: 74 Kawasaki G4-100


> bikeboneyard wrote:
>
> >will be $35 plus $10 ship
> >
> >
> >
> Just wanted to let you know that the gas tank arrived today. I knew
> that it must be the right tank when I pulled it out and saw all the
> Marine stickers on it. Sure enough, fits like a glove. Many thanks.

>
> --
> Freddie L. Main, II
>

----- Original Message -----
From: "Richard Blakley" richard@stonehamblakley.com
To: brendanf@bikeboneyard.com
Sent: Monday, May 16, 2005 6:36 PM
Subject: Airboot description


> Good afternoon:
>
> I have a '73 TS 125 and the rubber piece that connects the carb to the
> air filter is screwed up. Is that what you're calling an air boot? If
> so, I'd love to buy this piece assuming it's in decent condition.
>
> I purchased a headlight from you for this bike a while back and was
> quite pleased with the result, so if you can help again, I'd sure
> appreciate it.

>
> Thanks in advance,
> Richard Blakley


----- Original Message -----
From: Tom's email
To: brendanf@bikeboneyard.com
Sent: Wednesday, May 11, 2005 4:04 PM


Great parts & fast shipping, Brendan, you da man!!! Thanks again. PS, did I mention fair prices??


----- Original Message -----
From: "GG" shutters@on.aibn.com
To: brendanf@bikeboneyard.com
Sent: Thursday, May 12, 2005 12:52 PM
Subject: re: 84 cr500 parts recieved


> May the dirt gods bless you with many sunny
> days and hot lap times, you're the best!
> Thank you,

>
> Goran Gigic



----- Original Message -----
From: Tom's email
To: brendanf@bikeboneyard.com
Sent: Wednesday, May 11, 2005 4:04 PM


Great parts & fast shipping, Brendan, you da man!!! Thanks again. PS, did I mention fair prices??


----- Original Message -----
From: Marcus Sullivan
To: bikeboneyard
Sent: Monday, May 09, 2005 6:52 AM
Subject: additional parts


Brendan

Thanks for the parts. My 78 Goldwing is running like a top now. If possible, would you have a voltage regulator for my wing?

I can't thank you enough for the fast service and well conditioned parts.

Marcus Sullivan



----- Original Message -----
From: Keith G.
To: brendanf@bikeboneyard.com
Sent: Friday, April 29, 2005 6:42 PM
Subject: 78 CB 750K Head Assembly received


Thank you so much.
Received the Head Assembly Today, well packed.

Now I'm inquiring about the 78 CB 750K Clutch Assembly. Would it be the full Clutch Basket with usable Friction Plates, Springs, Lock washer and lock nut?
How much with Shipping?
Thanks again, Keith


----- Original Message -----
From: "Michael Hall"
To: brendanf@bikeboneyard.com
Sent: Friday, April 29, 2005 7:00 PM
Subject: KAwasaki ke 250


> Brendan,
> I am so happy I found you and your Boneyard! I emailed you yesterday about
> the clutch. I have a Paypal account and am willing to do the transaction
> that way. I need to take my engine into the shop and see why I can't change
> gears so ai may need some more parts. I would like to maybe save some money
> on shipping so would it be possible to hold an order on the clutch until I
> know what else I may need? By the way, my girlfriend loves the Boneyard
> pets.

> Thanks,
>
> Mike Hall


----- Original Message -----
From: Mike Lucas
To: bikeboneyard
Sent: Friday, April 29, 2005 4:30 PM
Subject: Re: DR100


Thanks for the DR100 Engine it runs great! Will definitely check your website with future needs. Thanks again


----- Original Message -----
From: "Mario P" gpnews4u2@hotmail.com
To: brendanf@montana.com
Sent: Thursday, April 28, 2005 9:36 PM
Subject: Re: 85 kx 250 trans


> Hi Brenden,
> Just wanted to say the parts arrived today and i didnt have to pay any
> customs charges.Thank you very much for taking the exta time to ship them
> out with the instructions i gave you.

> i installed the drum shifter and it seems to be working fine,i havent
> totally got the bike together yet to try it.
> The carb,im going to transfer all my jets etc to it and try it out tomorrow.
> Thanks alot.
> Mario
>

----- Original Message -----
From: Anna
To: bikeboneyard
Sent: Wednesday, April 27, 2005 5:53 PM
Subject: Re: 84 cr 500 rear wheel


Hi Brendan
just received my rear wheel today,the quality is all I could ask for and the service was great.
Thanks a lot, hope to do business with you again soon.

Hector.


----- Original Message -----
From: leo
Sent: Tuesday, April 26, 2005 7:36 PM


> Hello. Its me again, Leo from Mandan. Now I have another bike that
> i need parts for. Actually its my brothers bike that he's had since he was ten
> and he wants to fix it up again so here it goes. It is a 1975 GTMXB 80. Im not
> sure if all GT,s parts are interchangeable since i see you have a couple on
> your website but maybe or hopefully youll know. He needs the kickstart shaft
> the kickstart lever and a metal front fender preferably white but any color
> will do as long as its metal. Could you please e-mail me back with prices of
> parts and shipping and if you have the parts. Thank You.
> Leo
>
> P.S. I have to say that of all the sites I've been on and all the salvage yards
> ive scoured yours is by far the best for parts,prices and service so keep up the
> good work. THANK YOU!

>
> P.P.S. If ever you come across another complete Honda trail 90 Please e-mail me
> with price cuz im looking for one for my fiance . She had one growing up and
> would like to have one again. THANKS


----- Original Message -----
From: IKE
To: brendanf@bikeboneyard.com
Sent: Saturday, April 23, 2005 8:29 PM
Subject: at1 parts


Would you be willing to send me some pictures of the Yamaha AT1 bikes you have. Late 60's early 70's. I need alot of parts.

Thanks alot your site is great glad someone keeps this old stuff around.

ike


----- Original Message -----
From: Harvey and Betty Bruton
To: bikeboneyard
Sent: Friday, April 22, 2005 1:03 PM
Subject: DT175 parts


I got the parts today and it's exactly what I needed. Thanks. It's good to know there are places where a person can still get parts for these old bikes. Anyway, thanks again, Harvey



----- Original Message ----- -
From: BOB DOWNING
To: bikeboneyard
Sent: Wednesday, April 20, 2005 8:27 AM
Subject: Re: '82 Honda CX500 seat


Brendan, thanks for the reply. I received the seat just this morning U.P.S. Good seat.



----- Original Message -----
From: KlmmSod@aol.com
To: brendanf@bikeboneyard.com
Sent: Monday, April 18, 2005 11:58 PM
Subject: hodaka wombat


need headlight dimmer and horn switch for 1972chromtank wombat how much also looking for a good exhaust pipe without baffle in good condition how much thanks,i bought a wheel from you a while back it works great,bill



----- Original Message -----
From: "Roman Paine"
To: brendanf@bikeboneyard.com

Thank you very much. I will recommend you to everyone I know.

--
Best regards,
Roman mailto:roman@ionstorm.net


----- Original Message -----
From: LeopardFour@aol.com
To: brendanf@bikeboneyard.com
Sent: Monday, April 11, 2005 7:21 PM
Subject: 250 ninja parts


Thanks for the great service I will be dealing with you again soon Billy



----- Original Message -----
From: raymond.mugridge
To: bikeboneyard
Sent: Monday, April 11, 2005 4:30 PM
Subject: Re: suzuki ts 185 parts


Hello Brendan: Received parts today, look great . Thank you . Ray in Nova Scotia



----- Original Message -----
From: Timothy Robishaw
To: bikeboneyard
Sent: Monday, April 11, 2005 12:15 PM
Subject: Re: 89 ninja ex250 parts


Would u be willing to seperate and sell just one carb? all i really need is the vaccum diaphram which is located undet the black plastic cover on the top of the carb, so i really only need one, email or call with reply and thank you for a speedy answer for my first email, very good to see a company that replies to a pontential customer quickly, also makes someone come back again, good job.



From: Bomberoboy@aol.com
To: brendanf@bikeboneyard.com
Sent: Wednesday, April 06, 2005 11:49 PM
Subject: 74 CR250 Parts


Brendan,
I've bought parts for my 73 CR250M from you and couldn't be happier with their quality. Can you tell me if the forks and front wheel (for the 74) are complete, and will it fit on my 73?

I can be reached at bomberoboy@aol.com

Thanks for your help,
Hector Mendez
Peoria, AZ



----- Original Message -----
From: Kevin Pierson
To: brendanf@montana.com
Sent: Friday, April 01, 2005 6:42 AM
Subject: 1977 it 175d yamaha


Brenda, your web site is so cool. I cant thank-you enough for helping me. Please keep up the good work, i am telling all my buddies about your site.

My money order is in the mail, Kevin Pierson

I will stay in touch. K.P


----- Original Message -----
From: BRAWINGS@aol.com
To: brendanf@bikeboneyard.com
Sent: Wednesday, April 06, 2005 8:53 AM
Subject: Purchase headlight assembly and turn signal stalks (2)


Hello, I would like to purchase The headlight assembly and the turn signal stalks (2) for 1979 kawasaki KZ650. Can pay through paypal. Please send me a total.
Thank you for the great service in answering my questions about these. I appreciate good service from people who care about there customers.
Bert Rawlings
ps I am not sure how to pay you through paypal, I have only paid for items with paypal through ebay. I am assuming that you will request money through paypal. Thanks again.


----- Original Message -----
From: JOSEPH F RICCIARDI
To: brendanf@bikeboneyard.com
Sent: Wednesday, April 06, 2005 10:10 AM
Subject: Parts


Dear Brendan,My name is Joe Ricciardi. I bought some parts for Suzukis before and had good luck. I am now looking for a set of handlebars and/or luggage rack for a 1977 Kawasaki KE250. Please e-mail me either way to let me know if you have anything. Thank You Joe Ricciardi


----- Original Message -----
From: Stretch442@aol.com
To: brendanf@bikeboneyard.com
Sent: Saturday, April 02, 2005 6:00 PM
Subject: got the 86' frame


Brendan,
Thank you sooo much for coming though, I was really surprized when you went ahead and sent me another frame for no charge. I am very happy with the 86' frame and it is in great condition. Great doing business with you its been a pleasure - Chris Clifton


----- Original Message -----
From: accman51@dslextreme.com
To: "bikeboneyard"
Sent: Saturday, April 02, 2005 10:26 AM
Subject: Got the 100 twin yamaha rims


> Hey Brendon:
>
> Got the wheels for the 100 twin and they look good.
> Thanks alot, Jim
> bikeboneyard


----- Original Message -----
From: "serafin garcia" spike94402@yahoo.com
To: "bikeboneyard"
Sent: Friday, April 01, 2005 9:33 AM
Subject: Re: parts kaw MC1 90


> Brendan
>
> I received the parts and they are in great condition.
> I may need a few other parts later.
>
> Thanks
>
> Serafin


----- Original Message -----
From: Kevin Pierson
To: brendanf@montana.com
Sent: Thursday, March 31, 2005 3:56 PM
Subject: 1977 it 175d


brenda,i have already sent the it 175g and $20.00. i have no use for it, take it as a gift for helping me i do thankyou alot. I will send $15.00 more, i will do more business with you in the future.

your web sit rules, i thankyou a lot; Kevin Pierson


----- Original Message -----
From: Kevin Pierson
To: brendanf@montana.com
Sent: Thursday, March 31, 2005 12:04 PM
Subject: 1977- it 175d yamaha


I am happy i found one, you are sure it is a (1977 it 175d,) i need everything off the shaft. The d,e,and f had same kicker and ( it 125g.) i bought one off e-bay and it was a 1980 (it 175g) they changed that year. I need the piece that goes on the shaft and the kicker itself, (everything) i will pay you for it.
i love your web site. I have looked everywhere, i live in Illinois. 20 miles out of ST.louis Mo.


Thankyou, Kevin Pierson


----- Original Message -----
From: Cronan, Nathan
To: bikeboneyard
Sent: Thursday, March 24, 2005 6:04 AM
Subject: RE: '79 XR 185 Front End


I got the parts you sent yesterday. I wanted to thank you again. I was really surprised, and impressed, with the condition the parts were in. Much better than I expected.
I completely forgot to ask you about some other parts that I need for this bike (the one I've got had been in a head on collision). I need to see if you've also got these parts: 1) the headlight and number plate assembly, 2) the odometer assembly (I think it was an odometer and not a speedometer), and 3) all of the handlebar controls: clutch and brake levers and clutch cable (you already sent me the brake cable), kill switch (with wiring if possible), and throttle assembly with cable.
If you have the handlebars with everything attached, that will be fine so you won't have to fool with taking everything apart. Please let me know if you have any of these parts in good working condition and how much you want for them, as well as shipping. Thanks.



----- Original Message -----
From: CATHY BUSH FOR TED CATHY BUSH
To: brendanf@montana.com
Sent: Wednesday, March 23, 2005 6:05 PM
Subject: hubs


Hi, Just wanted to drop you a line. The hubs arrived and fit great. It,s nice to get parts and they are not thrash like some people send. Thanks again


----- Original Message -----
From: "Dwayne"
To: brendanf@bikeboneyard.com
Sent: Tuesday, March 22, 2005 9:05 PM
Subject: Hello
> Hey brendan must say i love the site lots of wicked stuff!
>
> I am in need of a few things for different bikes
> v
> 1977 RM80
> Rear Fender
> Magneto Cover
> Rear Brake Assembly
>
> 1976 XR75
> Points
> Intake
>
> 1984 XT600
> Some kind of headlight guard
> Seat or seat cover


----- Original Message -----
From: HANABAT@aol.com
To: brendanf@bikeboneyard.com
Sent: Tuesday, March 22, 2005 7:27 PM
Subject: CR-80 parts


Hey brendan, I have an 80-cr-80r and I'm looking for more travel. I have a nice set of the longer 81 forks that will bolt right up. Do you have the longer shocks and longer box section swing-arm off an 81? Also thanks for the 81 front wheel you sold me, I was very pleased with it. .........Thanks Kurt.


----- Original Message -----
From: simon POTTS
To: bikeboneyard
Sent: Monday, March 21, 2005 6:52 AM
Subject: Re: h2 parts


hi mates got the parts this morning , thanks a bunch ,parts are great

many thanks simon



----- Original Message -----
From: DAVE BOYD
To: bikeboneyard
Sent: Monday, March 21, 2005 5:35 PM
Subject: Re: 82 rm coil


thanks anyway....if something pops up and you remember i need one, just let me know.....ive tried other online companies and yours is the best so far.....
thanks
dave

----- Original Message -----
From: CisandMike
To: brendanf@montana.com
Sent: Thursday, March 17, 2005 3:00 PM
Subject: Re: arrival for 1974 SX175 Frame?


Brendan,

The 1974 Harley-Aeramecchi frame arrived about an hour ago, and everything looks GREAT!
Thanks so much for coming through on this; it is VERY much appreciated. Having it here for tonight's monthly HOG meeting makes all the difference to those of us responsible for authenticating membership.
You've helped make a recently-divorced woman's less-than-cheerful life, just a bit brighter with her "ticket" to Harley "ownership" and the possibility of HOG (Harley Owners' Group) membership.
I'll highly recommend your Bike Boneyard to anybody looking for parts.
Mike



----- Original Message -----
From: Stretch442@aol.com
To: brendanf@bikeboneyard.com
Sent: Wednesday, March 16, 2005 5:59 PM
Subject: cr500 engine question


Brendan
I know a person who purchased a cr500 engine and a few other things from you and was happy with it so I am hoping I may be able to do the same. I am going to need a cr500 engine and the necessary components. I have looked though your site and not found much at this time. I have considered service honda but I think it is completely ridiculous to buy a new one for $3000. If you come across one anytime, I would really appreciate it if you could email me and chances are, I'll buy it. Thanks for your time. - Chrishe



----- Original Message -----
From: Dave DeLuca dpdjoepalooka@charter.net
To: bikeboneyard
Sent: Tuesday, March 15, 2005 6:09 PM
Subject: Re: honda cb360 parts


Thanks for the quality parts. I was truely impressed with the shape of the wheels and fenders. Is there a way to input my appreciation for your business?

Here is what I am now looking for:
Front and rear marker lights and stems for 1974 Honda CB360

Front and rear marker lights and stems for a 1986 Honda VT500c and a 4-point
attach windshield, at least 16" tall, for this bike.


----- Original Message -----
From: marcello
To: brendanf@bikeboneyard.com
Sent: Friday, March 11, 2005 3:13 AM
Subject: cr125r, 1980


Hi Brendan,
thanx for sending me the front number plate in great order and that quick to Holland!! I'm very glad with it!
Question; which parts of a Honda Cr125R, 1980, do you have in store at this time?? And also looking for plastics and buddy for a Cr80R, 1980.

Regards,
Marcel Homsma,
Groningen
The Netherlands


----- Original Message -----
From: Nico van der Burg
To: bikeboneyard
Sent: Friday, March 11, 2005 3:43 AM
Subject: Re: Item # - Notification of Payment Received from (npg.vanderburg@quicknet.nl)


Good morning,

I just received the XL125- coil in good shape.
Thanks,

Nico van der Burg
the Netherlands

----- Original Message -----
From: gto400
To: brendanf@bikeboneyard.com
Cc: Gto400@myeastern.com
Sent: Monday, March 07, 2005 4:32 PM
Subject: Honda 1980 XL-185


Hello I saw your ad for the parts off of a 1980 honda XL-185 i was interested in the suppertrap silencer you have for it and i also was interested in the left hand side cover for the small sprocket on the engine and i would also need the screws for it too. I would really appreciate it if you could email me back with a price for the parts And the shipping charge also. It will be shipped to Zip code 06374
My friend told me about you and how reliable you are b/c he always buys stuff off of you he recomended this site to me.I dont know if you know him but his name is Aaron.


----- Original Message -----
From: motodave144 Scarduzio
To: brendanf@montana.com
Sent: Thursday, March 03, 2005 4:26 PM
Subject: 1981 yamaha IT 175 HEADLIGHT and NUMBERPLATE


Thanks Brendan


I received the package yesterday Friday 3/4/05. Thanks it's in great shape. pleasure doing business
with you
.
Sincerely Dave


----- Original Message -----
From: Suzi and Steve Pulsinelli
To: brendanf@bikeboneyard.com
Sent: Saturday, March 05, 2005 10:37 AM
Subject: RM 465 & 500 Forks


Hi Brendan,
Are the 1981, 82, 83 RM 465 & 500 forks & triple clamps still available? I'm also in need of the front wheel, axle & break hub. Can you also tell me if there set up with roller bearings or taper bearings on the steering stem. Please let me know soon.

PS
The xl 350 motor and rm125 roller frame worked out good.

Thanks
Steve Pulsinelli

----- Original Message -----
From: Luc honda250@nb.sympatico.ca
To: brendanf@bikeboneyard.com
Cc: Luc
Sent: Saturday, March 05, 2005 10:30 AM
Subject: 84 cr500


hey bike boneyard
.... thanx for my parts of my 84 cr500 , you maid my year ... ive been serching fort that crank fo 2 years ...
so yeah i need more parts dude ... can you make me a deal for the front brak assy ... i have the disk....... and i need the spacers for the rear tire
can you mak me a deal ...if so ill be buy more stuff from you

thanx luc

----- Original Message -----
From: "Richard B. Emerson" pavilion@pinefields.com
To: "bikeboneyard"
Sent: Saturday, February 26, 2005 9:11 AM
Subject: Re: Item #

> Enjoying already (the box made it in two days!) and will ride when the
> current round of snow melts. [grin]
>
> Cheers,
> Rick
>
> P.S. Check out the Honda Custom website:
> http://www.cb900c.net/modules.php?name=Forums&file=viewtopic&p=5181#5181
>
cool. thanks for biz
>brendan

You're welcome! I hope the referral in The Honda Custom Website helps.

Cheers,
Rick

----- Original Message -----
From: Dwight Ellison
To: bikeboneyard
Sent: Saturday, February 26, 2005 1:50 PM
Subject: Re:


A) I can't believe the service, and B) checks in the mail.

Thank you very much.

----- Original Message -----
From: Brian Hemmings
To: brendanf@montana.com
Sent: Friday, February 25, 2005 5:23 AM
Subject: Re:Do you still have CB400F


Hi Brendan

Hi Brendan the cb160 tank & shocks arrived today thankyou i am very pleased with them, can you remember i asked you for a front & rear mudguard for a honda cb400f you said you had a pair so i asked you for some pic,s but you never sent any. Do you still have a pair in good condition? if so how much including p&p please if you could send me a photo of them first it would be cool.

Thanks Brian.



----- Original Message -----
From: peter sowden
To: brendanf@montana.com
Sent: Thursday, February 24, 2005 2:08 AM
Subject: Re: kl250 airbox


Morning matey.

For your info, the airbox turned up here in the UK yesterday, thanks for the excellent service.



Regards

Peter Sowden

----- Original Message -----
From: mary moore
To: brendanf@bikeboneyard.com
Sent: Wednesday, February 23, 2005 3:18 PM
Subject: 82 xr 500 and 81 cr 450


Hi, I'm looking to upgrade my forks on my 79 cr 250. I want to go big, so which set of forks are bigger the cr or xr. do the triple trees come with the forks? Let me Know asap. I like how you have all of your bikes and parts listed. Most salvage yards do not list nothing,and when you call they get pissed if you ask a question. Thanks Bill.


----- Original Message -----
From: William LaRue
To: brendanf@bikeboneyard.com
Sent: Sunday, February 20, 2005 2:49 PM
Subject: CR 250 Caliper


Brendan,

Got the caliper last month, just got in installed (my wife can't accuse me of being to fast!) Works great!! Forgot what it's like to ride with a front brake.

Thought you might enjoy these pictures of free advertisement.

Thanks again!!


Twist the grip, let'r Rip

Willy

----- Original Message -----
From: "Ralph Suges"
To:
Sent: Tuesday, February 15, 2005 7:28 PM
Subject: cool site


> I stumbled upon your site trying to locate parts for ragged odyssey my kid
> brought home. Then I wandered onto your politics link...right on brother!
> I'll be back in touch when my wife let's me spend some money, until then,
> keep up the good work.
>
> Ralph Suges
>

----- Original Message -----
From: Charlene L Magnone
To: brendanf@bikeboneyard.com
Sent: Tuesday, February 15, 2005 4:01 PM
Subject: lock assy. for seat and helmet with key


hi, i would like to thank you for the seat you sent me its in great shape just what i was looking for.I was wondering if the lock assy. for the seat and helmet was with that bike also and how much would it cost.I need the key with it too. Again thanks for the seat.



Scott of Weirton, WV.

----- Original Message -----
From: Nate2274@aol.com
To: brendanf@bikeboneyard.com
Sent: Thursday, February 10, 2005 6:58 PM
Subject: Ossa's & politics

Hello,
Love your website, I'm am a devoted Ossa owner and agree with your political veiws.(nice to hear some Americans can still think on their own)
Nate


----- Original Message -----
From: "Ryan Shafer" rshafer@PADREINC.com
To: brendanf@bikeboneyard.com
Sent: Wednesday, February 09, 2005 8:59 AM
Subject: CRF rear Wheel


> Brendan,
>
> Thanks for your help in the past, the CR250 Wheel was perfect.
>
> I am looking for a 2002 or equivalent CRF450 (19") rear wheel. Just
> needs to be straight and have a hub. Scratches O.K. I want to put a
> paddle on it.
>
> Thanks,
>
> Ryan
>

----- Original Message -----
From: "Steve Johnson" s.johnson@comcast.net
To: brendanf@bikeboneyard.com
Sent: Sunday, February 06, 2005 4:20 AM
Subject: 76 CR250


> The kickstarter assy worked great, thanks again.
> Do you have a coil and condenser for a 1976 CR250?
>
> Thanks,
>
> Steve

----- Original Message -----
From: Marc Dana Swinson
To: 'bikeboneyard'
Sent: Tuesday, February 01, 2005 5:01 PM
Subject: RE: 1974 Yamaha 175dt


We received the motor last Friday and put it in the bike on Sunday. The motor runs great! I would like to check on any ’76 XL 70 motors for my youngest boys’ bike. In addition, tell me more about the 72 Harley Sprint that you have. You will be my first stop for parts before I go anywhere else because of the great service you have provided. Thanks so much for all the enjoyment and the bumper sticker.


----- Original Message -----
From: "Steve Johnson"
s.johnson@comcast.net
To: brendanf@montana.com
Sent: Wednesday, January 26, 2005 5:13 PM
Subject: Parts


> Thanks a lot man, I'll definitely get more from you in the future!
>
> Steve
>
>

----- Original Message -----
From: Frankrago3@wmconnect.com
To: brendanf@montana.com
Sent: Tuesday, January 25, 2005 7:52 PM
Subject: Re: 74 XL 175


Rec'd the front end today. Works great.

Thanks,

Frank


----- Original Message -----
From: "Cocuzzo, Dave L SIK"
To: brendanf@montana.com
Sent: Thursday, January 13, 2005 4:11 AM
Subject: RE: [Fwd: 62 g2cs project]


> It showed up yesterday afternoon. Excellent way to ship, love the
> big blue bin. I will provide a positive testimonial to your site if you'd
> like....

> Thanks again, Dave Cocuzzo.

----- Original Message ----- v
From: Cody Smith
To: Brendanf@bikeboneyard.com
Sent: Tuesday, January 11, 2005 8:08 AM
Subject: xl parts


Hey Brendan hows it goin I ordered some parts from you and they turned out to be great I am a proud owner of a 73 xl 250 I like to change my pipe to the right side insted of the left I need a airfilter box (complete assembly),side cover from the left of a xl,brake pedal from a 78 xl and a pipe without compression release. I would like u to send me an Email about all these things I will be glad to get it.v


Thanks
Ian Doehrman

----- Original Message -----
From: "Rocket" r0ck3t@neo.rr.com>
To: "bikeboneyard" v
Sent: Sunday, January 09, 2005 1:49 PM
Subject: Re: 79 RM parting out


> Just got the rear fender today. Worked out beautifully and I will
> advertise your site on my bumper with your sticker! :)
Do you have any
> other parts for a 1979 RM125-400 left? I may need more.
>

>

----- Original Message -----
From: FBFishon@aol.com
To: brendanf@montana.com
Sent: Saturday, January 08, 2005 8:22 PM
Subject: KX-125



Hey thanks a lot for sending me that cylinder and piston for my dirt bike. I got everything put back together yesterday and I got my bike running again. Its been like 4 or 5 months the last time I had it running. THANKS AGAIN!
-Tim


----- Original Message -----
From: "Cathy&Eric" cnebrady@comcast.net
To:BRENDANF@montana.com
Sent: Wednesday, January 05, 2005 3:27 PM
Subject: parts received


> Brendan,
> Received parts for 1973 xl 250, a little wd-40 and the turn signal / horn
> switch worked fine. Headlamp works and buddy pegs bolted right up. Keeps upv
> the great service! Thanks for your help on my project. I will be ordering
> more parts from you in the future. Your prompt replies to be e-mails doesv
> not go un-noticed! Thanks again.

> Ericv
>


----- Original Message -----
From: Patchesm51@aol.com
To: brendanf@bikeboneyard.com
Sent: Monday, December 27, 2004 11:45 PM
Subject: 1986 Honda CR250

Hey Brendan,
My name is Mike La Guardia. I have already purchased a front wheel from you for my 1986 Honda CR250. It worked out great. I was hoping you could help me find another part for it. I am looking for the C.D.I. box for the electrical system. I believe this is the right name for it. It is the box mounted under the gas tank. about 3 in. x 1 in. If you could help me out it would be greatly appreciated. please email me at laguardia_mike@yahoo.com

thanks in advance.
Mike


----- Original Message -----
From: Chris Farrell
To: brendanf@montana.com
Sent: Tuesday, December 21, 2004 11:29 AM
Subject: Air filter box recieved


I got the air filter box in the mail yesterday it is in very good condition as I had hoped. Thanks for the bumper sticker and I will be dealing with you guys in the future.

Thanks Chris Farrell


----- Original Message -----
From: "Steve and Petes"
To: brendanf@bikeboneyard.com
Sent: Monday, December 20, 2004 10:31 PM
Subject: 85 yz 490 parts


>
> Hi I bought two rad covers off you for my 83 yz125 early this year I was
> very happy with them!
I am now interested in the 85 yz490 bottom end you
> have any idea how much shipping would be to ship to Vancouver B.C Canada.
>
> Thanks Steve

----- Original Message -----
From: "Kyle Chilcoat"
To: "Bikeboneyard"
Sent: Monday, November 29, 2004 8:15 AM
Subject: 1981 Kawasaki 750 LTD Centerstand and Spring


> Hello:
>
> I am looking for the centerstand and spring/mechanism for the 1981 Kawasaki
> 750 LTD. I bought some parts from you a little while back and was pleased
> with the service and would like to order some more.
If you have the
> centerstand and mechanism please e-mail pricing and delivery estimate.
>
> Thanks:
>
> Kyle Chilcoat
> tabsltd@ponyexpress.net

----- Original Message -----
From: "Louis Mielke"
To: brendanf@bikeboneyard.com
Sent: Sunday, November 28, 2004 4:32 PM
Subject: 1984 XR200R parts request


> Hi. My names Louis Mielke and I have bought a 86 Honda CR500R engine from you.
> Just letting you know great service, and I really appriciated how well it came
> packaged.
I haven't fired it up yet but its totally rebuilt and sitting in a
> CR500 to three wheeler conversion. (you can check it out here if you want
> http://tiger.towson.edu/~lmielk1)
>
> Anyway.
>
> I'm currently looking to do a four valve conversion on my Honda ATC200X and I
> noticed you have a 84 XR200 being parted out.
>
> Do you still have the
> airbox & intake boots, exhaust, carbs and topend (head, valves, springs, cams,
> intake spigots etc) available? If you do, what can you work out for a price/ do
> you have any pictures of the bike or parts. Let me know. Thanks.
>
>
> ~ Louis Mielke


----- Original Message -----
From: jim williams
To: brendanf@bikeboneyard.com
Sent: Thursday, November 25, 2004 9:05 AM
Subject: 1985 honda 250 big red


Brendan, I just got a transission from you. Worked great. Now i need the left front fork (side that the axle screws in) and the front axle for a 1985 Honda 250 Big Red ATV. If you still have them email me the cost and shipping cost. Thanks Jim Williams


----- Original Message -----
From: "Mark Hinderman"
To: brendanf@bikeboneyard.com
Sent: Saturday, November 13, 2004 9:28 AM
Subject: praise


> Brendan, I just received my headlight today, and as usual, it is perfect! Dealing with you is way better than wasting my time with E bay. Thank you very much. Mark Hinderman



----- Original Message -----
From: Gary Horn
To: 'bikeboneyard'
Sent: Thursday, November 11, 2004 7:39 AM
Subject: Re: 1973 Yamaha RD250 Voltage Regulator with Mounting Bracket


Your shipment came in yesterday afternoon, fit perfectly, and my bike is now running again, charging at 14 volts. I can't tell you, or anyone else I've already told, just how grateful I am that your salvage yard exists, and how competent you are. To me this was a big gamble (sight unseen), but your parts were in a lot better shape than I expected, and work great! Thanks for being there for anyone who needs help like this. My son-in-law told me how a friend of his years ago, just had to give it up on his bike, because he couldn't find a VR replacement then... now we have the Internet, and businesses like yours who have learned to take advantage of it. You can bet I'll be back for more in the future.


----- Original Message -----
From: C, Robert -
To: brendanf@bikeboneyard.com

Sent: Wednesday, November 10, 2004 4:52 AM
Subject: 1980 cb 900 custom


Brendan,
Hello, I don't know if you remember or not but I had purchased some side covers and carbs from you for a 1982 suzuki gs650 a few months ago that worked out just wonderful for and now I have another project. I see that you have a 1980 cb 900 custom listed. Do you happen to still have the seat and rear rack and rest that you have listed for this bike? And if so how much for shipping please email me back and let me know Thank you.
Robert C

From: Jay Russo
To: brendanf@bikeboneyard.com
Sent: Thursday, November 04, 2004 9:01 AM
Subject: WHEEL


Brendan, I wrote to you back on August 8th of this year about a front and rear wheel for a 1978 CB750K Four Honda motorcycle. I bought the front wheel which was in excellent shape. At that time you also had a rear wheel, which at the time appeared to be in the same shape. Some questions, one do you still have the rear wheel, if so are the holes where the spokes go through in the center hub, and on the outer ring are they still round. If you still have the wheel what would it cost to take the tire off and could you send a picture of it. Also is the price still the same as your list and what would it cost to send it to New Jersey. In your list of parts for the CB750K you list pegs, are those front, or passenger pegs, and could you send a picture of the pegs for this bike. Could you also send a picture of the front brake caliper. Any assistance you can afford me in this matter would be greatly appreciated.
Sincerely,


----- Original Message -----
From: Ryan Belanger
To: brendanf@montana.com
Sent: Tuesday, November 02, 2004 2:58 PM
Subject: Re: front forks


Hey you guy's rock..........i'll take the forks from the cr 500 and just let me know how to order and pay and all that stuff..........thankx alot i've been looking for a long time glad i stumbled onto your site..............

cheer's


From: svitale@tampabay.rr.com
To: brendanf@montana.com
Sent: Tuesday, November 02, 2004 2:21 PM
Subject: CB750c alt cover.


>
> Thanks so much for the part! it is excellent and the price was very good.
> Thanks again.
> Simonew

>

----- Original Message -----
From: "joey cruickshank" sixstepmaster@hotmail.com
To: brendanf@montana.com
Sent: Monday, November 01, 2004 12:27 PM
Subject: The motorcycle parts Guru


>
> Thanks so much for the amazing 83 yz 125 bottom end, I could not have
> asked for anything better! The U.P.S service could have been better on the
> canadian side, but thats neither here nor there. My YZ is ready for the ice
> racing season. So thanks again and I will be doing buisness with you in the
> near future as to the fact i own four vintage bikes, that need some love
>
> Sincerly Joe Cruickshank.


----- Original Message -----
From: Kyle Chilcoat -----
To: brendanf@bikeboneyard.com
Sent: Monday, November 01, 2004 4:29 PM
Subject: 81 kawasaki 750ltd exhaust


What all comes with the exahust “system” you have advertised? I don’t really need one per-se but I really don’t like the 4-1 megaphone header on it right now. I was wondering what comes on it and how good of shape its in.
Thanks for the brake rotor and the horn both are in good shape and are functioning properly.
It was nice doing business with you.

Kyle Chilcoat
tabsltd@ponyexpress.net


----- Original Message -----
From: ^^
To: bikeboneyard
Sent: Saturday, October 30, 2004 11:17 PM
Subject: Re: 81 yamaha yz-125 clutch


is it in good condition??will you send a pic?and what would the total be to ship to 81082?? by the way thanks for the fast shipment and smooth transation for the crank it works great

----- Original Message -----
From: "Andrew White"
To: brendanf@bikeboneyard.com
Sent: Friday, October 29, 2004 8:22 PM
Subject: I need parts


> hi my name is Andrew from kansas im interested in the odyssey you have does
> it run or just turn over and i was wondering where you are located so if i
> bought it i could come pick it up or figure out the shiping charges any info
> you could give me would be great
>
> P.S. I have never been to a website with such a great selection of bikes
> parts and etc.

>

----- Original Message -----
From: MuzzleLodr@aol.com
To: brendanf@bikeboneyard.com
Sent: Thursday, October 28, 2004 10:49 PM
Subject: Can Am Parts Needed


Hello Brendan ,

This is Bob Cole in central Ky . I'm a very satisfied customer who bought a
CanAm 175 MX2 from you a couple of years ago . I did a resto on the bike and it
came out just beautifully .
Anyway , I'm back restoring a 125 TNT now and in need
of some parts -wonder if you could help ? Specifically I need the following :

1. original TNT clutch lever
2. complete kickstart lever
3. TNT turn signal/hi-low beam switch housing
4. original TNT turn signal assemblies (both front and rear set)
5. speedometer mount plate with key switch assembly

Brendan - if you have time to check your inventory for any of these CanAm parts
It would be very appreciated -just email back when you get a chance !
Thanks very much for your time and help .

Bob Cole Salvisa Ky.

----- Original Message -----
From: "Simone Vitale" simone_vitale@hotmail.com
To: brendanf@montana.com
Sent: Wednesday, October 27, 2004 11:27 AM
Subject: Re: CB750C alt cover


> Thanks!
>
> your site rocks and I put your link to a good forum/site.
>
> http://www.cb900f.net

>
> Thanks again.
> Simone

----- Original Message -----
From: "Kyle Chilcoat" tabsltd@ponyexpress.net
To: "bikeboneyard"
Sent: Thursday, October 21, 2004 8:42 AM
Subject: RE: parts


Received them today. Thanks for the parts and I will contact you in the future for more stuff.

Thanks again.

Kyle Chilcoat

----- Original Message -----
From: mike curtician
To: bikeboneyard
Sent: Wednesday, October 20, 2004 9:17 PM
Subject: Re: Notification of Payment Received


hi brendan mike here i bought that kerker header off of you .dude that header is really nice. thanks alot .1 question though. do you know what jets i should use for this header? the jets in it right now are the stock jets,but it's running a lil lean. could you help me out on this i just dont want to blow it up. thanks again. mike


----- Original Message -----
From: "Walter" monteman22867@cox.net
To: brendanf@montana.com
Sent: Wednesday, October 13, 2004 9:01 PM
Subject: RE: Payment Accepted!

> Do you have a ebay site so I can give some good feedback???????


----- Original Message -----
From: lexington118@alltel.net
To: "bikeboneyard"
Sent: Thursday, October 07, 2004 4:39 PM
Subject: Re: Re: honda xl350


> I just wanted you to know how refreshing it is to find someone like you that tells the truth and sells quality used parts.I am very very pleased with the 74 xl350 exhaust. when you get another in this condition I will buy it for a spare.Tthanks again --Duke
> >


----- Original Message -----

From: Randall Smith wegofast@mindspring.com
To: bikeboneyard
Sent: Wednesday, October 06, 2004 7:43 PM
Subject: RE: cr80
Forks arrived in good shape. Thanks!
Randy Smith

----- Original Message -----
From: Cloutier, Shawn Shawn.Cloutier@ONCURA.com
To: bikeboneyard
Sent: Tuesday, October 05, 2004 12:59 PM
Subject: RE: DT 100 Parts


The tank worked out wonderfully. I just wanted to say thanks!

Shawn Cloutier


----- Original Message -----
From: charlie kelso
To: bikeboneyard
Sent: Monday, September 27, 2004 8:04 PM
Subject: hondaline pants


hello
got the hondaline pants thanks for the good service
will be back for more thanks from
charlie in oklahoma
feel free to use this in bone yard praise


----- Original Message -----
From: Tony Holland
To: brendanf@montana.com
Sent: Friday, September 24, 2004 4:18 PM
Subject: Thank You


Thank you for the rear shock, it was in better condition then i had thought. Do you think that you will be able tog et a radiator for me, or shall I look elsewhere? Again Thank you, I am very impressed and will definitely do business with you again

Tony Holland

----- Original Message -----
From: "Andy Smith" ASmith@turfproductscorp.com>
To: "'bikeboneyard'"
Sent: Friday, September 24, 2004 9:05 AM
Subject: RE: YG1


> Hey Brendan, with out trying to sound like a ass kisser, your outfit is a
> breath of fresh air ! I ve been in the bike biz for 25 years until just over
> a year ago , so Ive dealt w/ all types. Yes, my kid found your " full" site
> last night and probably dropped you a quick email. I looked breifly, but he
> needs a fr fender, a seat ,and 2 gas tank emblems to get started.He is only
> 14, and a very good motocrosser who has all of a suuden shown an interest in
> vintage stuff. I have asked him to shop frugally, and beware of people
> gouging badly. Looks like he may have found a good source.


----- Original Message -----
From: "John Sydney Baker"
To: brendanf@bikeboneyard.com
Sent: Friday, September 24, 2004 5:33 AM
Subject: rear fender

> Hi Brendan, just received rear fender for my cb400f here in the UK. I am very pleased and would like to thank you for your excellent service. Hope to do business again. Please feel free to use this as a recommendation. regards, John Baker.
>

----- Original Message -----
From: "Christopher Bernardi" nardi1@hotmail.com
To: brendanf@montana.com
Sent: Thursday, September 23, 2004 12:09 PM
Subject: springer


> Brendan, Springer arrived yesterday, looks excellent. Thanks a lot. If you
> come across more of this old chopper stuff, shoot me an email and I'm sure
> we can work something out.

>
Thanks
> Chris

----- Original Message -----
From: Fernando Romero
To: 'bikeboneyard'
Sent: Wednesday, September 15, 2004 8:01 PM
Subject: RE:
Brendan,
,Thanks just got it ALL IS GOOD!!!!!!!

Could you see if you have a carb for a 80 suzuki ts 100 also a seat and a tank
Thanks
Fernando


----- Original Message -----
From: "Ed McAllister" eymc@worldnet.att.net
To: "bikeboneyard" brendanf@montana.com
Sent: Sunday, September 12, 2004 11:18 AM
Subject: Honda Wheel


> Received Honda 450 rear wheel assembly Friday. Very nice.
> Thanks Again,
> Ed McAllister
> Macon, Ga

----- Original Message -----
From: Chas Schiwitz cakschiwitz@sbcglobal.net
To: brendanf@bikeboneyard.com
Sent: Thursday, September 09, 2004 6:17 PM
Subject: cb450 frame


Just got my 72 cb450 frame today and I am impressed ! Frame is in excellent condition!
Thank you very much and I definitely will be back! I highly recommend your operation!



Thanks again
Chuck
Missouri

----- Original Message -----
From: chris.l@spray.se
To: brendanf
Sent: Sunday, September 05, 2004 7:43 AM
Subject: happy customer


Hi,

Thanks for fast delivery and good service.

Christer in Sweden

----- Original Message -----
From: "Joe Ashcraft" JAshcraft@morgantigroup.com
To: "bikeboneyard"
Sent: Tuesday, August 24, 2004 7:14 AM
Subject: Re: Notification of a Pending eCheck Payment Received


> Received the carb yesterday afternoon, thanks for the quick ship.
>
> Joe
-

---- Original Message -----
From: Laurie Hansen lhck2ofus@sympatico.ca
To: bikeboneyard
Sent: Sunday, August 15, 2004 8:48 AM
Subject: A-1
Bike BoneYard is a true and fast serving business.
I am in Canada..........as soon as they recieved my money order, the package was on its way . I emailed back and forth from time to time, checking on my order and recieved replys back immediatly!!!!
I rate this company with a BIG A-1 !!!!! I will be passing on the site to others!! Bikebone Yard has my permission to give out my email to anyone from Canada that may have concerns on ordering from them,
Laurie.


----- Original Message -----
From: "Mark Hinderman" mommo121@charter.net
To: brendanf@bikeboneyard.com
Sent: Friday, August 06, 2004 8:23 AM
Subject: parts


> I have just got a 1967 Yamaha 80 trail. Would it be the same as your YL-2? If not will the parts fit? I need kick start lever, fuel petcock complete, the twist part of the throttle handle,(strange what some people lose!) Clutch lever on the handle bar, air box lid, front brake cable, and a good tail light lens. If it helps you, the serial# is L2-510230. I have bought parts from you before and have been very pleased. I have also told many of my friends about your Boneyard. I hope you can help me. Thank you for your time, Mark Hinderman
>
>

----- Original Message -----
From: Donnie Smith
To: brendanf@bikeboneyard.com
Sent: Tuesday, August 10, 2004 3:36 AM
Subject: A pic of the tank


Just a pic of the tank I got from you about 3 months ago.Just got the bike running.I'll ride it for a while then tear down for paint later.Thanks for the great service.I'll hunt thru the boneyard on my next project.
Donnie Smith


-

---- Original Message -----
From: "Mark Hinderman" mommo121@charter.net-----
To: brendanf@bikeboneyard.com
Sent: Friday, August 06, 2004 8:23 AM
Subject: parts


> I have just got a 1967 Yamaha 80 trail. Would it be the same as your YL-2? If not will the parts fit? I need kick start lever, fuel petcock complete, the twist part of the throttle handle,(strange what some people lose!) Clutch lever on the handle bar, air box lid, front brake cable, and a good tail light lens. If it helps you, the serial# is L2-510230. I have bought parts from you before and have been very pleased. I have also told many of my friends about your Boneyard. I hope you can help me. Thank you for your time, Mark Hinderman
>
>

----- Original Message -----
From: James
To: 'bikeboneyard'
Sent: Friday, August 06, 2004 7:32 AM
Subject: RE: COIL for 1993 Suzuki DS 80 Good!


Coil arrived in good working order.

Already installed and producing nice blue spark!

Thanks very much!

James.


----- Original Message -----
From: Tony and Lia Marrazzo
To: brendanf@bikeboneyard.com
Sent: Sunday, August 01, 2004 5:22 PM
Subject: Suzuki Parts


Well, you did an awesome job for my dad on a wiring harness for his 77 Kawasaki KZ650, so try this one. I have a 1987 (11/86) Suzuki SP125 that was crashed hard and I need the following parts: handle bars, front hydraulic brake master cylinder and lever, right front and right rear turn signals, and right side cover. It looks like there may be a heat shield for the muffler but I am not sure. My guess that the front brake master cylinder should be close enough from an sp125 -sp250 - sp400. Any help is appreciated!


----- Original Message -----
From: Randy Reddell vintage-mx@charter.net
To: brendanf@bikeboneyard.com
Sent: Friday, July 30, 2004 8:31 PM
Subject: 1983 Suzuki rm500 frame
I have received the frame. Thank you, I feel it is in better condition then you described. I will definitely be checking your website for other parts I may need. Once again, thanks.

Randy

----- Original Message -----
From: James
To: 'bikeboneyard'
Sent: Friday, August 06, 2004 7:32 AM
Subject: RE: COIL for 1993 Suzuki DS 80 Good!


Coil arrived in good working order.

Already installed and producing nice blue spark!

Thanks very much!

James.

----- Original Message -----
From: LMarr2720@aol.com
To: brendanf@bikeboneyard.com
Sent: Sunday, July 25, 2004 4:04 PM
Subject: part
brendan, Your service was incredible. I ordered a wiring harness on july 22nd and ups delivered it on the 23rd.I don't know how you did that. the harness is installed and working great. thanks a ton.

----- Original Message -----
> > From: "Dawn Lindahl"
> > To:
> > Sent: Monday, July 19, 2004 7:29 PM
> > Subject: 79 Yamaha carbs

> Got em today. They look good. Thanks!!
>
>

----- Original Message -----
From: "Ty Griffin" tygriffin@hotmail.com
To: "bikeboneyard"
Sent: Thursday, July 15, 2004 8:12 PM
Subject: Re: kz 750 spectre starter

> Hi,
> I received the kz750 starter today. It works like a charm.
>
> Thanks,
>
> Ty Griffin

----- Original Message -----
From: Rick Nixon
To: brendanf@bikeboneyard.com
Sent: Tuesday, July 13, 2004 5:26 PM
Subject: 74 mt 250

Do you still have the twist trottle for the mt 250. If so, how much with shipping? How much additional for the carb.? The pulse generator for my XR500 works great. Thanks.
Rick

----- Original Message -----
From: shotuku@comcast.net
To: brendanf@bikeboneyard.com
Sent: Friday, July 09, 2004 12:43 PM


yes I am still interested because I just bought a 1980 kdx 250 but has no third gear and I would like the extra parts and im the guy who bought the 1980 it 425 exhalent bike powerful dependable and gust a great bike hope to do more biasness with you soon


----- Original Message ----
From: "Greg Benson" bensongg@yahoo.com
To: brendanf@montana.com
Sent: Tuesday, July 06, 2004 6:59 AM
Subject: Seat and Side Covers


> Hey!
> I bought brake calipers from you for a 1981 Suzuki GS
> 650. They work great. Im now in the market for a seat
> and some side covers for the same bike. Can you help
> me out? Pictures?
> Thanx!
> Greg

----- Original Message -----
From: daniel palin dpalin@jam.rr.com
To: bikeboneyard
Sent: Monday, June 28, 2004 10:23 PM
Subject: Re: Seat & tank, 1987 Suzuki DR 100


Hey, I got the Tank & Seat for the 1987 DR100 today, I expected the seat to be in just about the shape it is and figured the tank would be dented some. WOW!!!!! I can't believe how good the tank looks!!!!! You guys have some good stuff!!!! If you come across some side plastics for a 1987 Suzuki Dr 100 or know of any place that might have them it would be a great help. That is all I need to finish this bike. I am taking the seat to be recovered tomorrow. Once again thanks ALOT!!!!!!!!!!!!!!!!! Daniel

----- Original Message -----
From: Jim Couey chalk.buttes@verizon.net
To: bikeboneyard
Sent: Monday, June 28, 2004 7:29 PM
Subject: Re: 68 exhaust ct90


Got hte exhaust just fine... Thanks for great transaction...jc

----- Original Message -----
From: Penny Ruggiero
To: brendanf@bikeboneyard.com
Sent: Sunday, June 27, 2004 8:37 AM
Subject: Re: 1979 xs1100



hi this is the first chance i had to get back to you i would like thank you for your quickness in sending my part it was just what i needed . also i would like to know if you have a side cover as your looking at the bike the left side and this is for the xs1100 also i need a tack. for a 1981 or 1982 Suzuki gs650 please get back to me with price with shipping


thank you very much joe

----- Original Message -----
From: halfpriced@comcast.net
To: "bikeboneyard"
Sent: Saturday, June 26, 2004 8:27 AM
Subject: cables--$10/piece


> I received the kickstart and was very pleased, thankyou. I need the throttle cable for a 1973 yamaha dt175 I found it in a 74 and I think it will work could you send me a pic. I also am looking for the spring for the kickstand on a 1976 dt 175. If you have that could you tell me a price, and give me a total for shipping both pieces.
>
> thanks again for great business,
>
> Alfred price

----- Original Message -----
From: "Mark Uker" monggo@outgun.com
To: "bikeboneyard"
Sent: Tuesday, June 22, 2004 7:01 AM
Subject: Re: titled rd400 frame


> Received it yesterday, great condition, thanks.
> Mark

----- Original Message -----
From: "Jack Mariotti" flatheadjack@webtv.net
To: "bikeboneyard"
Sent: Friday, June 18, 2004 8:54 AM
Subject: Re: 1982 kawasaki kz 550 ltd carbs


> hi brendan, i safely recd. the 1982 kaw kz 550 carbs yesterday thurs the
> 17th, the box was chewed up but the carbs are great, the bikeboneyard is
> the greatest, thank you , jack.


----- Original Message -----
From: "Steve Whetham" whetham@sktdalton.net
To: "bikeboneyard" brendanf@bikeboneyard.com
Sent: Thursday, June 17, 2004 5:31 PM
Subject: Re: MSN-Request: 1978 Kawasaki kz650


> rec'd 6/14 and tested good. Thanks and was good doing a deal with you.
> Steve

----- Original Message -----
From: "James Winters" winters3@llnl.gov
To: "bikeboneyard"
Sent: Tuesday, June 15, 2004 2:54 PM
Subject: Re: Suzuki B105P gas tank


> Received the tank this afternoon, thanks!! Here's a testimonial for
> your website, I certify that I have received no compensation nor have
> I been coerced into making this statement:
>
> "I had been looking for a gas tank for a 68 Suzuki Bearcat (B105P)
> for the better part of two months. My web search took me to places
> as far as Australia, New Zealand and England. I had all but given up
> hope when someone suggested your site. Wham, bam, thank you ma'am I
> had my gas tank, it arrived quickly and was in great shape (good
> price too!). I now have a beautiful vintage bike running again, my
> 14 year old son will be forever grateful!"
>
> Jim Winters

----- Original Message -----
From: Sunny Oliver
To: brendanf@bikeboneyard.com
Sent: Tuesday, June 15, 2004 2:24 PM
Subject: 81' atc 250R


Hey brendon,
Thanks for the swing arm. Works great. Now I a need the clutch center that clutch plates sit in. Do you have one?


----- Original Message -----
From: Carlos
To: brendanf@bikeboneyard.com
Sent: Monday, June 14, 2004 6:32 PM
Subject: Gas Tank



Brendan, I bought a carburator from you and it works perfect, thanks, now I need a Gas Tank for my 82 XT550. Can you tell me if you got any and how much, or where I could get one? My is OK but it leaks a little on the side.

Thnks.

----- Original Message -----
From: "terri litherland" mumfie31@hotmail.com
To: brendanf@montana.com
Sent: Friday, June 11, 2004 9:21 AM
Subject: Re: KZ650 (1977)



> Hi Brendan,Parts arrived safeley this afternoon.Well worth wating for I,m
> more than happy with them.No doubt I,ll be in touch soon.Regards,Terri.
>
>

----- Original Message -----
From: jean guy themens jthemens@videotron.ca
To: bikeboneyard
Sent: Saturday, June 05, 2004 12:47 PM
Subject: Re: front caliper with piston for S2 1973


Hello, Parts received installed and working fine. Thank you for supplying parts in such good condition.Will use your services again.
Jean G. Themens

----- Original Message -----
From: "John Keifer" JohnK@grainsystems.com
To: "bikeboneyard"
Sent: Tuesday, May 25, 2004 7:03 AM
Subject: looking for parts


> Brendan,
> I'm looking for a stock air box assembly for a '81 suzuki
> GS850G for a friend, any help you could offer would be appreciated. Tranny
> covers I bought from you last year for KZ1000 are still working and looking
> fine.
> Thanks,
> JohnK
>

----- Original Message -----
From: "Greg Benson" bensongg@yahoo.com
To: brendanf@bikeboneyard.com
Sent: Monday, May 24, 2004 3:00 PM
Subject: Rear Brake Caliper for 81 Suzuki 650


> Hey!v
> Just wanted to say thank you for the caliper, its a
> perfect fit! Now if it would just stop raining. LOL
> Thanx!
> Greg
>

----- Original Message -----
From: Edison Tranjan Tacão
To: bikeboneyard
Sent: Monday, May 24, 2004 1:37 PM


I thank for good service.


----- Original Message -----
From: Ryan Lerew
To: bikeboneyard
Sent: Sunday, May 16, 2004 8:49 PM
Subject: Re: 1974 Kawasaki MC1


Great! I'd like to order the oil pump assembly and an oil tank.. preferably one that fits the MC1 fairly well, so it doesn't stand out as being non-OEM
I'll pay using paypal, send me a final invoice including shipping/handling

Thank you very much, I have never done business as easily as I just did ordering from you.... I didn't expect nearly this much from what I thought was going to be just your average junk yard.... you guys are awesome!!!

Ryan

----- Original Message -----
From: "James W Beers" JWBeers@duke-energy.com
To:
Sent: Friday, May 14, 2004 12:13 PMV
Subject: '85 Goldwing 1200


>
>
>
>
> Brendan,
>
> I'm very pleased with the seat and sissy bar I bought from you this spring.
> You have excellent service and rapid response.
>
> Now I'm looking for a set of Markland floorboards/runningboards for A 1985
> Honda Goldwing 1200. The bike is fully dressed.
>

----- Original Message -----
From: "Smitty" dss@gospelcom.net
To: brendanf@bikeboneyard.com
Sent: Wednesday, May 12, 2004 8:16 AM
Subject: Chain guard
v

> The carb for my 305 Dream that I got from you is working great... Do you v
> have a chain guard for the 305 Dream?
>
> In His and Your Service
>
>
> Duane S. Smith

----- Original Message -----
From: Rich Hogan hoagie_46@charter.net
To: brendanf@bikeboneyard.com
Sent: Tuesday, May 11, 2004 6:09 AM
Subject: Side Covers.


Good morning,
I just want to say "Thanks" the three number plate/side covers that you sent me were great! The 1976 MR-250 cover was more than you had me expecting, and the two CR-250 covers were in fantastic shape. I will be looking forward to doing business with the "Bike Boneyard" in the future, for all my restore projects. Thanks once again.

Sincerley,
Rich Hogan
Little Falls, MN


----- Original Message -----
From: "Dennis A. Plank" daplank@bellsouth.net
To: "bikeboneyard" brendanf@montana.com
Sent: Friday, May 07, 2004 10:51 PM
Subject: RE: Notification of Payment Received


> Got the fender today. It is a nice one and I am very happy with it.
> Thanks.
>
> Dennis

----- Original Message -----
From: Chad Estevez
To: brendanf@bikeboneyard.com
Sent: Friday, May 07, 2004 3:47 PM
Subject: 1979 KZ650 side panel (right side)


Hi, I just wanted to thank you for the honda rectifier I just purchased from you guys. It worked out perfectly!! Now i'm looking for the right side panel for this Kawasaki bike. Is this part still available? If so I would like to purchase it. Thanks a bunch!


Chad

----- Original Message -----
From: "Debbi Holterback" sdholterback@yahoo.com
To: "bikeboneyard" brendanf@montana.com
Sent: Thursday, May 06, 2004 6:09 PM
Subject: Re: tm75 panels


> Brendan, I got the TM75 panel today and they work
> great. Thanks for your effort. Steve

----- Original Message -----
From: "Steve Grabinger"
Sent: Friday, May 07, 2004 12:36 PM
Subject: Fox Shox


Brendan,

Just a couple of pictures of the Fox shocks I got from you last winter, now fully rebuilt. I was very happy to get such a nice set to start with. I'm always a little leary to buy something sight unseen, but they were in decent shape and definitely worth the rebuild. Thanks again!

Steve

----- Original Message -----
From: Jrswartz49@aol.com
To: brendanf@bikeboneyard.com
Sent: Friday, April 30, 2004 4:39 AM
Subject: Xl 175 Honda points cover


Brendan -
I got the cover and it looks great. Thanks for the help and great service. I'm now a big fan of the bike boneyard.com. I'm a BONE-HEAD!...... or ... something...
Thanks again.
Regards - Jack

----- Original Message -----
From: Randy Markwell -----rdm1@airmail.net

To: bikeboneyard
Sent: Thursday, April 29, 2004 6:01 AM
Subject: Re: Husqvarna 360 Parting Out


Hi;
Just a note, the rear engine mounting plates arrived, they will work good. Thanks and I am looking forward to doing more business with you.
Randy Markwell

----- Original Message -----
From: MISTRLD2@aol.com
To: brendanf@bikeboneyard.com
Cc: MISTRLD2@aol.com
Sent: Thursday, April 22, 2004 10:02 PM
Subject: 1984 HONDA 1100 SABRE STARTER SILINOID


HI IM NORM ASK FOR 1978YAMAHA PARTS AND THE PARTS YOU SENT ME I AM VERY HAPPY WITH SO IM BACK FOR HONDA PARTS ITS A 1984 V65 1100 SABRE AND IM IN NEED OF A START SILINOID ITS HAS A FUSE MOUNTED TO IT WITH 4 WIRE PLUG ASWELL THANKS WILL BE WAITING TO HERE FROM PLESE TELL ME HOW MUCH TO SHIP TO STOCKTON CALIF THANKS


From: Rick rdelp@cox-internet.com
To: bikeboneyard
Sent: Monday, April 19, 2004 4:22 PM
Subject: Re: 1978 cb750 fender


got the fender today was very happy with it Thank's Rick

----- Original Message -----
From: Stephen Ellington condition1@dslextreme.com
To: brendanf@bikeboneyard.com
Sent: Monday, April 12, 2004 8:48 PM
Subject: TT seat


Hey Brendan! Well, I don't know what I was expecting when I ordered the TT500 seat. But I sure wasn't expecting an original seat in such good condition complete with the Yamaha name still stiched on the back! And only 10 days after I mailed the check! Thanks Brendan! Viva la Boneyard!
Steve

----- Original Message -----
From:Vikinglord6@cs.com
To: brendanf@bikeboneyard.com
Sent: Friday, April 09, 2004 3:45 AM
Subject: 79-80 it 250


> am looking for a 79-80 it,yz 250 cases, good lower end,transmission.
> preferobly an it unit. i bought a1980 400 canam from you,and love it. thanks.
>

----- Original Message -----
From: "brian fortner" zolander@adelphia.net
To: "bikeboneyard"
Sent: Monday, April 05, 2004 4:18 PM
Subject: Re: Notification of Payment Received


> thanks for being so prompt i will use this site again and i will tell my
> friends about you. keep up the good work i will get some more business sent
> your way...

----- Original Message -----
From: "Blair Leblanc" blairleblanc@stokesandspiehler.com
To: "bikeboneyard" brendanf@montana.com
Sent: Monday, April 05, 2004 6:20 AM
Subject: RE: 1986 Honda TRX 350


> i received the switch and it was in great shape and just what i was
> looking for...thanks...as i get into fixing this bike, i notice a few
> more pieces that are missing...let me know what you have and how
> much....
>
> 1. clamp for oil cooler hoses (fits in-between on engine)
> 2. cover for oil hoses (black thing that fits on engine)
> 3. right front mud shield (fits over shocks in front - plastic- black)
> 4. right plastic louver (red - fits in front plastic above your knees)
> 5. left and right knee panels (fits by your thigh between front and back
> plastic)
> 6. front hood scoop (black thing that says Honda - fits under headlight)
> 7. trunk assembly (lid and the thing it attaches to)
> 8. shift lever
>
> any condition...any help would be appreciated...let me know....
>
>

----- Original Message -----
From: Stephen Ellington condition1@dslextreme.com
To: bikeboneyard
Sent: Friday, April 02, 2004 7:19 PM
Subject: skidder


Just wanted to let you know I got the TT500 skidplate and bumperstickers and how much I appreciate it!
You don't happen to have a seat in decent shape do you?
A rear rack that will fit?
Thanks again
Steve

----- Original Message -----
From: joey poole cousinweedy@cablelynx.com
To: bikeboneyard
Sent: Wednesday, March 31, 2004 8:32 PM
Subject: Re:


Hi Brendan. Got the 360 seat today.More and better than expected. I'll refer you to my friends.
Joey

----- Original Message -----
From: Nancy Durdle jomarip@winco.net
To: brendanf@bikeboneyard.com
Sent: Sunday, March 28, 2004 4:42 PM
Subject: yz465 kick starter


Hi, I bought a stator and flywheel from you about two months ago, they work great, thank you. Now I need a kick starter, do you have one that will fit a 1981 yamaha yz 465? Let me know how much with shipping to Roseville ILL. Troy.

----- Original Message -----
From: jeff bushell vgbushells@yahoo.com
To: brendanf@montana.com
Sent: Saturday, March 27, 2004 1:32 PM
Subject: Thanks For Cam!!


Hi, Just wanted to thank you for the cam. Arrived today.Perfect condition!! Last part I needed to get my vintage flat tracker ready for the season!! Thanks again, Jeff Bushell

----- Original Message -----
From: "Kurt Greebon" moparchem@yahoo.com
To: brendanf@bikeboneyard.com
Sent: Thursday, March 25, 2004 8:02 PM
Subject: 1970 honda CT-70


> Hi, I recently bought a 75 Hodaka Dirt Squirt from
> you. I am very pleased with the Hodie. No surprises. I
> noticed that you have a 1970 Honda CT-70 listed on
> your web site. Do you still have this bike. I so
> what kind of condition is it in, and are there any
> major mechanical problems?
>
> Kurt Greebon

----- Original Message -----
From: "Richard Martin"martinroyce@hotmail.com
To: Cc:
Sent: Wednesday, March 24, 2004 5:14 PM


> Just to let you know I recieved the swingarm assembly today and everything
> looks great. thanks Richard Martin

----- Original Message -----
From: ronchacon@earthlink.net
To: brendanf@montana.com
Sent: Thursday, March 18, 2004 10:12 AM
Subject: Re: MSN-Request: 1995 Suzuki RM


> Hi. I received the gas tank for the 1995 Suzuki RM 250. I installed it and
> it seems to be working out just fine. I assume you may have some additional
> parts for this bike, if I should need them? Do you happen to have a rear
> sprocket that is in decent shape? How about a rear brake disk? Thanks!
> > Ron Chacon
>

----- Original Message -----
From: tbfastr@comcast.net
To: "bikeboneyard"
Sent: Sunday, March 21, 2004 5:56 PM
Subject: Re: rm 250 rear rim


> i got the rim u guys hooked me up with the breaks axle tire inflated and all thank you verry much your great. sincerly tbfastr


----- Original Message -----
From: Tom Millie tmillie@wispair.net
To: bikeboneyard
Sent: Wednesday, March 17, 2004 4:00 PM
Subject: Re: KLT Rear Fender/Kicker


Received it today....thanks for the update...we'll be talking to you I'm sure...Thanks for the fast shipment..Tom Millie

----- Original Message -----
From: "Vince Cottongim" vince.cottongim@earthlink.net
To: brendanf@bikeboneyard.com
Sent: Tuesday, March 16, 2004 9:59 PM
Subject: Yamaha Parts


> Brendan,
>
> I had a great experience buying some turn signals from you a couple
> months ago and now I find myself looking for more parts to complete my
> pet project.
>
> I would like some information on two items.
> 1) Front and Rear fenders off of the 75 mx-250 .
> 2) The engine out of the 75 dt 400 that's listed. It is listed for
> $150, but do I get bottom end, cylinder, head, etc. with it? Either
> way what would you sell the complete engine, trans, ign cover, clutch
> cover, clutch, shift and kick shafts, compression release assembly,
> carb, CDI and coil as a package deal?
>
> Thanks,
> Vince Cottongim
>

----- Original Message -----
From: chilln2126@adelphia.net
To: "bikeboneyard" brendanf@montana.com
Sent: Tuesday, March 16, 2004 7:19 PM
Subject: Re: Re: [Fwd: Re: 75 CB750K headlight ears]]


>
> > I want to thank y'all very much for the headlight ears, they came today and look great. I know what you went through to get them to me and I really appreciate it. You've got a satisfied customer here in Georgia. Please keep your web page updated on CB750 parts, I'll be checking it quite often.
> Thanks again, Keith
>

----- Original Message -----
From: Conor Brown jcbrown@accesscomm.ca
To: brendanf@bikeboneyard.com
Sent: Sunday, March 14, 2004 6:01 PM
Subject: Parts received


We are in receipt of the parts we ordered and we thank you very much for your prompt and precise order. We paid another $37.15 COD upon their delivery as well as the original payment of $65 US, sent to you approximately ten days ago. I am presuming we are even at this point and that you have received adequate payment.

Thanks again, it was a pleasure doing business with such a reputable dealer, with the entire transaction done on good faith - nice to know there are still honorable and reliable businesses in operation.

Lisa Brown (Travis)

----- Original Message -----
From: "brooks robert" Robert.Brooks@GDC4S.Com
To: "'bikeboneyard'"
Sent: thursday, March 11, 2004 2:00pm
Subject: RE: 03 wombat forks


got the forks last night!!! thanks! look good!
Bob

----- Original Message -----
From: "Lee" Lee@qualityvans.com
To: "'bikeboneyard'"
Sent: Monday, March 08, 2004 10:53 AM
Subject: RE: KLT200 Tank


> got the tank, perfect fit. Thank you, will keep you in mind for other things
>

----- Original Message -----
From: Captain captainuno@earthlink.net
To: bikeboneyard
Sent: Friday, March 05, 2004 11:18 PM
Subject: 88 Cagiva


Thanks Brendan,
I received the tank and pegs today, thank you so much, good parts for these things are hard to come by. Pleasure doing business.

Kirk Hester

----- Original Message -----
From: Chris Bergstrom cebers85@yahoo.com
To: brendanf@bikeboneyard.com
Sent: Wednesday, March 03, 2004 8:48 PM
Subject: XL 175 Coil
Dear Brendan-
I just recently purchased a gas tank from you off a 1974 Xl175. I am very pleased with it. It looks great and works great. I now would like to buy the coil. PLease e-mail me back the total bill (shipping included). I believe last time I used paypal....
Thanks a lot!

----- Original Message -----
From: "Scott Berry" sberry@csc.martin.fl.us
To: "bikeboneyard"
Sent: Wednesday, March 03, 2004 7:50 AM
Subject: Re: Parts
> Hey_
>
> I got the stuff! Thanks! On the sound of triples, my dad says the bike
> sounds like a chain saw gone bad. Its music to me.
>
> I'll run your stickers on my fairing if you don't mind.
>
> Scott
>

----- Original Message -----
From: Ken 40452282.8000104@comcast.net
To: bikeboneyard
Sent: Tuesday, March 02, 2004 5:10 PM
Subject: Re: checking up on the brake caliper and carburettor boot


Hello again, Parts arrived tonight in good form. Was able to catch the delivery truck driving the neighborhood. Thanks, Ken


----- Original Message -----
From:
To:
Sent: Tuesday, February 24, 2004 7:32 AM
Subject: Thanks


> Hi Brendan,
> Just to let you know I received the carb for my CR-250. I appreciate
> your prompt service, and reasonable price.
> Sincerely,
> Shawn Malone
>

----- Original Message -----
From: Alex Russo alex3r@hotmail.com
To: brendanf@montana.com
Sent: Friday, February 20, 2004 10:40 PM
Subject: Re: back wheel


Brendan,

Thank you for the rear wheel, just recieved it today. Everything is good and i look forward to continue in doing buisness with you.



Thanks again

alex russo


From: Nathan Smith natesmith@austin.rr.com
To: brendanf@bikeboneyard.com
Sent: Sunday, February 22, 2004 7:50 AM
Subject: part needed.


Brendan

Thanks for the speedo and tach. I got them friday and they work great. Now I need a "Head" for a 1980 XR80. Can you help me?

Thanks
Nate

----- Original Message -----
From: larry czchimp@teleport.com
To: brendanf@bikeboneyard.com
Sent: Thursday, February 05, 2004 2:36 PM
Subject: Suzuki carb cover


Great part!!!



THANKS BreNdAn!!!!!!! Larry Reed…( Me at “The Farm” 2002



----- Original Message -----
From: Chris Bergstrom cebers85@yahoo.com
To: brendanf@bikeboneyard.com
Sent: Sunday, February 08, 2004 7:06 PM
Subject: 1974 Xl 175 coil





----- Original Message -----
From: "MOTOLANE-- Clint Pulliam" motolane@frontiernet.net
To: "Bike Bone Yard" brendanf@bikeboneyard.com
Sent: Tuesday, January 27, 2004 7:14 PM
Subject: Fw: suzuki rm 465


> thought i'd send this to ya since you sent it ! thanks, Clint
>
>
> To: motolane@frontiernet.net
> Sent: Tuesday, January 27, 2004 7:57 PM
> Subject: Re: suzuki rm 465
>
>
> > I have recived my frame and pipe today i was very satisfied thank you very
> > much!!!!!! i will tell all my freinds about you i have already told
> > several. Thank You
> >

>

----- Original Message -----
From: Jim
To: 'bikeboneyard'
Sent: Tuesday, January 06, 2004 4:11 PM
Subject: RE: Re: 96 WXC 360


They arrived today, thanks. And nice doing business with you.



James White

gixxerw1@cox.net


Original Message -----
From: Christopher Hoffmann
To: brendanf@bikeboneyard.com
Sent: Tuesday, January 06, 2004 1:22 PM
Subject: 82 Honda XR500r


Hey Brendan,

Thanks for that part you sent me for my 81 Honda ATC250r.. Quality piece.
My older brother is interested in the 82 Honda XR500r you have listed on your site. Could you please let us know if it is still available? And if possible could you send us a few pictures of it?


Thanks again..

Chris Hoffmann


----- Original Message -----
From: David & Holly Urias dhurias@ptialaska.net
To: bikeboneyard
Sent: Wednesday, December 31, 2003 9:55 PM
Subject: thank you


Dear Brenden, Thank you for the carb. I think that it will work just fine. It was very nice to do business with you. It was really easy. I will keep you in mind next time.
thanks David

----- Original Message -----
From: "T Roberts" timnjude@yahoo.com
To: "bikeboneyard" brendanf@montana.com
Sent: Monday, December 29, 2003 3:28 PM
Subject: Re: Notification of Payment Received


> Brendan,
>
> Thanks abunch! The parts arrived today. I asked you to
> send it right away and you did...priority mail at
> that! I should have offered extra money, but I was
> just so excited about finding the part and getting it
> here, that I didn't. You have a satisfied customer
> (well, my son, too) for life. We will be in touch
> about other parts, soon.
>
> Thanks, again!
>
> Tim (and Evan) Roberts
>

----- Original Message -----
From: meadjug meadjug@mail.anonymizer.com
To: brendanf@bikeboneyard.com
Sent: Tuesday, December 23, 2003 3:34 PM
Subject: 450 parts


got the parts...arrived in great shape... better than i expected...
thanks... David m.


----- Original Message -----
From: Davis, Bill ckywz@allstate.com
To: brendanf@bikeboneyard.com
Sent: Tuesday, December 23, 2003 12:34 PM
Subject: Sponsor ???


I'm going to race a little more aggressively this year,both VDTRA flat track and ARHMA/TVRC motocross.
I may even go to Alabama for the Runnin Brand GP in May and The 72 Classic Scrambles in November.
Do you mind if I list you as a sponsor ???
You may get a plug every now & then from it.It won't cost you anything.
I just appreciate the strait shooting on the parts I've gotten from you and want you to stay around so if I need stuff down the road.

Take care !!!!

BILL DAVIS TVRC 33X

----- Original Message -----
From: Roy Franks roycarin@localnet.com
To: bikeboneyard
Sent: Thursday, December 11, 2003 10:01 PM
Subject: 88 CR125


Hey just to take a moment of your time I got the 125 together and got it all tuned in and she is a screamer just wanted to say thanks not only for the bike and being so patient with me but your friendly professional way about doing things the bike you said was a runner and THAT SHE IS!!!!!!!!!!!!! she runs awsome she is all painted up and clean she is sitting here in my family room with a PW50 and a Banshee but I have no room left in the garage and I sure ain't letting them stay outside NOT IN THE COLD. thanks again Brendan and I'm sure I'll be buying more from you you guys had it tore down and shipped to me in record time I'll sure spread the good word on you so be prepared
Roy Franks



----- Original Message -----
From:grabinger@loretel.net The Grabingers
To: bikeboneyard
Sent: Saturday, December 13, 2003 10:32 PM
Subject: Re: fox 15.5" shocks


Brendan,
Got the shocks Tuesday. They look great. Thanks again.
Steve

----- Original Message -----
From: Norman Brodie normanbrodie@hotmail.com
To: brendanf@montana.com
Sent: Wednesday, December 10, 2003 12:39 AM
Subject: Re: RD 350 front wheel


Dear Brendan:

Just a quick note to say that the RD 350 wheel arrived in the mail today and it is definitely a lovely item. The drilled disk rotor and the very good condition tyre are a very pleasant bonus. Thanks for your good service and I will definitely recommend your business to others looking for good used parts in the future.

Sincerely,


Norman Brodie


----- Original Message -----
From: Ryan Maxwell
To: brendanf@bikeboneyard.com
Sent: Monday, December 08, 2003 8:43 PM
Subject: CR


Hey, love the site, fair prices, listed out plain and simple.. Wish more were this way.

Im looking around for a early 90's late 80's rolling CR 125, I have a motor thats good and would like to find a bike to drop it into and have a second bike. Not quite sure what year this motor is and what all interchanges from year to year for motors is there somewhere to identify the engine year?

thanks,

Ryan Maxwell

----- Original Message -----
From: IMMRBONG@aol.com
To: brendanf@bikeboneyard.com
Sent: Monday, November 24, 2003 2:21 PM
Subject: 74 yamaha dt 360


> i just wanted to say thanks Brendan, the stator and magneto that i ordered
from you work great. thanks to you i can hit the trails again. i look
forward to doing business with you again soon.
> once again thanks
> Bobby
>
>

----- Original Message -----
From: Pluto1064@aol.com
To: brendanf@bikeboneyard.com
Sent: Thursday, November 13, 2003 11:40 AM
Subject: Re: xt550


> thanks again brendan
> p.s thanks for the extras
> its a pleasure doing business.
> jim
>

----- Original Message -----
From: Chris Kern ckern@ptd.net
To: bikeboneyard
Sent: Thursday, November 13, 2003 3:21 PM
Subject: Re: cover for yz50


Thanks Brendan. I received the YZ50 cover and the cable today. Just what the doctor ordered. Always a pleasure doing business with you! Chris

----- Original Message -----
From: RJA1235@aol.com
To: brendanf@bikeboneyard.com
Sent: Friday, November 07, 2003 7:28 AM
Subject: Re: 74 yamaha 360mx chain guide/guard


Hi got the chain guide yesterday, looks good. Thanks, Ron


----- Original Message -----

From: Mark Mcgrew OLDBIKES@peoplepc.com
To: bikeboneyard
Sent: Wednesday, October 29, 2003 6:03 PM
Subject: Re: maico tank


Gooey here...
Got the tank Brenden and I love it ! It is SO much cooler than I expected, a cool period piece that is in REALLY great shape ! by the way, you packed it so well and sold it so reasonably that I put a note on Marks CALVMX discussion page ... kinda odd all that talk right now about the "bad" guy(s) in our hobby, then you come through like this !
Hope you dont mind .... Thanks again

lemme know if a frame for a 73-4 maico or my 78-80 250 bottom end come in, ok ??


Below is some praise for the bikeboneyard that i found on the vintage bike bulletin board http://www.calvmx.com/wwwboard/index.html
I have shared the same experiences, bith through the board, and via e bay, as a seller and a buyer. You guys are a great group, and I mean that. Support in a hobby is very important, and this board is a great tool to provide support, thanks Mark, but the guys that frequent the board(s) here that LOVE this hobby and do it for the love of the bikes is really where its at.
I came home today and had a packeage from Brenden Fennesey, www.bikeboneyard.com ,, Im sure we've all done biz with him, and it was a period correct plastic replica Maico tank, in yellow, with petcocks, packed better than explosives would be packed, in a solid carton, and much nicer than I expected.
Price of the part and fantastic service ??? So low I'd be embarrased to tell you.

So, while Todd is lurking out there, and there are and will be the occasional other, this hobby is FULL of great people, and I REALLY like it that way.

I dont mean to slight anyone I have done biz with before, just happens my package today was from Brenden, so I used it as an example.


----- Original Message -----
From: Biltonk@aol.com
To: brendanf@bikeboneyard.com Sent: Saturday, October 25, 2003 9:09 PM
Subject: Re: xl coil


Thanks I go the coil, frm all the others I got from guys on that web site, yours was the only one that exactly matched mine. The others where shorter with only one wire..


Thanks
MArk

----- Original Message -----
From: tee tee@wcoil.com
To: brendan
Sent: Friday, October 10, 2003 6:17 PM
Subject: Re: forks for honda 200s three wheeler


thanks I got the forks today great doing business

----- Original Message -----
From: "nik paneczko" KX1327@COX.NET
To: brendanf@montana.com
Sent: Wednesday, October 14, 2009 4:23 PM
Subject: Re: looking for ktm parts.


> Just came in the mail today.Kicker looks great.Thanxs for the deal.StefanP


----- Original Message -----
From: Beveltek@aol.com
To: brendanf@bikeboneyard.com
Sent: Thursday, October 23, 2003 5:33 PM
Subject: Re: Aussie Shipping


Thanks Brendan - I'll watch your site with interest, and by the way it's a bloody good one (well set out and clear description of the parts and prices
Cheers
Dave in Sydney


----- Original Message -----
From: "Chris Bashaw" cbashaw@hotmail.com
To: brendanf@bikeboneyard.com
Sent: Tuesday, September 23, 2003 5:34 AM
Subject: Re: honda ct 110 parts


> Brendan
> I got the exhaust yesterday, and it works great!
> I am going to put my Ct110 up for sale this week, and if you still have the
> Yamaha ty250
> for sale when I get the cash I will definately buy it from you.
> Thanks
> Chris

----- Original Message ---- From: Nancy Foster nan29@redrock.net
To: brendanf@bikeboneyard.com
Sent: Saturday, September 20, 2003 7:34 AM
Subject: ct110 rear wheel


I recieved the rear wheel yesterday in good shape. Thanks for your prompt service. Derrill Foster.

----- Original Message -----

From: Chris Geren
To: brendanf@bikeboneyard.com
Sent: Monday, September 15, 2003 9:28 PM
Subject: Yamaha 360 Parts


Brendan,
I bought the Yamaha MX80 from you a while back. You shipped it to us in Kentucky. It runs great and the girls are enjoying it. I am back from the middle east and am trying to get a few parts to complete my bike. I have a 1974 Yamaha DT3 360A Enduro. I need the headlight (complete), taillight (complete), and both side covers (they are triangular in shape). Can you help me. Thanks


Chris and Sarah Geren


----- Original Message -----
From: Davie
To: bikeboneyard
Sent: Wednesday, September 17, 2003 1:11 PM


hello m8

thanks for sending those side panels received them in perfect condition

do you have the exhaust & yoke bolt for it as well
(cagiva)

cheers
davie

----- Original Message -----
From: "Mark Mrotek" MMrotek@QWest.net
To: "'bikeboneyard'" brendanf@bikeboneyard.com
Sent: Wednesday, September 10, 2003 10:22 PM
Subject: RE: 1981 Yamaha XS650 "start button"


> Brendan,
>
> You did it again, the part arrived just in time and it's exactly what I
> needed! THANK YOU! I don't know what I'd do without the Bike Boneyard!
>
> Regards,
>
> Mark Mrotek
>

----- Original Message -----
From: Rex Gose rgose@tds.net
To: bikeboneyard
Cc: Scott Sisk
Sent: Saturday, September 06, 2003 5:30 PM
Subject: Re: Scott Sisk - Inner Clutch


Got it today, thanks for the quick, speedy shipping!


----- Original Message -----
From: "Mike Linbeck" mike.linbeck@eimc.com
To: brendanf@bikeboneyard.com
Sent: Friday, August 29, 2003 10:19 AM
Subject: Bultaco 143 parts


> Received my parts and I am very pleased. Better than expected and complete.
> Will tell anybody that will listen about you.
>
> Best Regards,
> Captain Mike Linbeck
>
>

----- Original Message -----
From: MISTRLD2@aol.com
To: brendanf@bikeboneyard.com
Cc: MISTRLD2@aol.com
Sent: Wednesday, August 27, 2003 10:16 PM
Subject: (no subject)


i have recv the 1978 xs1100 parts and was very happy with them and i will be ordering more parts soon if you get 1978 yamaha xs1100 with low miles i would like to get complete motor it has been a great plasure doing bis with you and im sure it will be next time keep up the good bis thanks mistrld2

----- Original Message -----

V From: Jason Galbraith
To: bikeboneyard
Sent: Thursday, August 21, 2003 9:01 AM
Subject: RE: Honda parts


Recieved in good order, thank you


----- Original Message -----
From: Pfinn2730@aol.com
To: brendanf@bikeboneyard.com
Sent: Monday, August 25, 2003 8:17 PM
Subject: (no subject)


Brendan,
Thanks for the quick turn around on the cylinder head cover for the XR 250.

Patrick Finn
Pfinn2730@aol.com

----- Original Message -----
From: Rubin
To: brendanf@bikeboneyard.com
Sent: Tuesday, August 19, 2003 9:44 PM
Subject: received seat


received seat-excellent, just what I needed.I still need that front master cylinder, but I burned the hell out of my left arm with tar at work; so I'm poor for a few weeks.Will send email when I can send payment.Thanks again for the great service!


----- Original Message -----
From: Smithead97@aol.com
To: brendanf@bikeboneyard.com
Sent: Sunday, July 27, 2003 10:25 PM
Subject: honda cb 400T 1978


Hello,
You recently shipped he a set of carbs for the above motorcycle. These worked out well. Thanks!
I am curious if you have an AC generator for the same machine? Cost with shipping to Ohio 45889?

Thanks again

Rueben


----- Original Message -----
From: "Met rod" metrod@hotmail.com
To: brendanf@bikeboneyard.com
Sent: Wednesday, July 23, 2003 7:48 PM
Subject: Re: 1980 Honda XL250S - Parts Request


> Brendan,
> Alex got the parts. Thanks a million. If we need more we will look you up.
>
> Thanks Again
> Rod

----- Original Message -----
From: Randall C. Weiss rcwabret@cox.net
To: bikeboneyard
Sent: Thursday, July 17, 2003 11:20 PM
Subject: Re: Parts info


Brendan...received the parts today. Thanks a million, they are just what I needed. Surfed around your website a little and noticed that you do pretty well in the speedway races up in your area. My 10 year old daughter and I both love to watch them when ever we can on TV. I understand that Barona speedway near us here in El Cajon is going to start them pretty soon or already does some but I could not find out anything from thier website. If any of your speedway buddies know anything about races in our neck of the woods please forward the race schedules and we would love to go and watch in person. Anyway thanks again and you are a standup internet bussiness that I would deal with anytime!
Randy Weiss



From: "Scotty" s.hamilton@symatico.ca
To: "bikeboneyard" brendanf@bikeboneyard.com
Sent: Thursday, July 17, 2003 11:37 AM
Subject: Re: Notification of Payment Received


> The Swing Arm and Carb showed up as promised. Thanks again Brendan for your
> great patients and service you provided to me.....Outstanding Job!!

>
> Scotty
> Ontario Canada


----- Original Message -----
From: Britbikesmitty@aol.com
To: brendanf@bikeboneyard.com
Sent: Sunday, July 06, 2003 7:26 AM
Subject: Re: honda parts


thanks!,always great doing business with you



----- Original Message -----
From: "Puffer, Glenn" gpuffer@montana.edu
To: brendanf@bikeboneyard.com
Sent: Tuesday, July 01, 2003 2:17 PM
Subject: thanks


> Brendan - Keep forgetting to thank you for the light & gages, especially the
> extra lamp and ring. Didn't forget this time! Will be doing business with

> you again soon! - Glenn
>


----- Original Message -----
From: Rugglesjason@aol.com
To: brendanf@bikeboneyard.com
Sent: Sunday, June 29, 2003 12:02 PM
Subject: 1980kdx400


the triple tree clamps i got from you worked great. i was woundering if you had a clutch handle and clamp


----- Original Message -----
From: Doug and Stacey Swanson sdswanson@attbi.com
To: bikeboneyard
Sent: Sunday, June 29, 2003 12:48 PM
Subject: foot pegs


Hi Brendan,
I bought some parts (top end) for a 1981 XR200R a few weeks ago and they work great. My mechanic said the parts looked great and now my bike runs better than ever. Now I am in need of some better footpegs for the same bike. What I have works but they are just worn down and was hoping you might have some in better condition. Let me know if you have anything....
Thanks,
Doug


----- Original Message -----
From: Scotty s.hamilton@symatico.ca
To: brendanf@bikeboneyard.com
Sent: Tuesday, July 01, 2003 10:43 AM
Subject: RM125


Thanks Brendan you have made a couple of Young lads very happy. The Wheel arrived with all the necessay parts, spacers, bearings and axyl. It was in good condition and I am extremely pleased.

Thanks

Scotty


----- Original Message -----
From: "kris denny" charle088@hotmail.com
To:
Sent: Monday, June 23, 2003 6:25 PM


> i recieved the lower end of the motor and its better than i expected. thanks
> alot i hope to be doing more buisnes with you soon. the fast shipping was
> great. thanks alot.
>

----- Original Message -----
From: Gary gary.elevatorman@verizon.net
To: bikeboneyard
Sent: Friday, June 20, 2003 12:15 PM
Subject: Suzuki tach


Brendan,
The tach arrived without any problems and works fine. I hope we can do business again. Thanks, Gary



----- Original Message -----
From: Byland, David W.BylandD@more.net
To: bikeboneyard
Sent: Friday, June 20, 2003 11:23 AM
Subject: RE: Yamaha RT1 360 Crank


Crank was delivered yesterday, and looks to be in excellent shape. Many,many thanks, Brendan.




----- Original Message -----
From: Roger Hediger roger@idsapplications.com
To: brendanf@montana.com
Sent: Monday, June 16, 2003 8:51 AM
Subject: Kawasaki F6 or F7 Parts


Brendan,
I received the parts I ordered and they exceeded my expectations. Thank you for including a complete baffle with the exhaust pipe. I need to inquire about some chromed parts now. I have all the parts I am asking about but they will need to be re-chromed before use. If you have any of these parts that are rust free chrome I would like to use those instead.

Front and rear wheels (with clean spokes also)
Luggage rack
Rear shock springs
Handlebar
Kickstart lever
Shift lever
Ignition switch housing

These are to be used on a 1972 F6 but the parts can come from F6 or F7 in the 71 thought 73/74 range

Thanks again

Roger Hediger


----- Original Message -----
From: Paul Nilson PNJN@comcast.net
To: brendanf@bikeboneyard.com
Sent: Monday, June 09, 2003 8:54 PM
Subject: THANKS


THANKS FOR YOU BONEYARD BOARD HELPED ME SELL A CYCLE ENGINE I WAS TRING TO SELL.


----- Original Message -----
From: Culpepper Gadsen bullseye@commspeed.net
To: bikeboneyard
Sent: Wednesday, June 11, 2003 1:55 AM
Subject: Re: kaw 500 frame


Showed up on time and as advertised, thanks a lot I'll keep you on file here in case I need you again!

chuck

----- Original Message -----
From: "Alvin Thomas" at31@comcast.net To: brendanf@bikeboneyard.com
Sent: Sunday, June 08, 2003 4:29 PM
Subject: Hello Brendan - question for you


> This is A Thomas the guy you sold the yz490 lower half and the clutch
> hub to. They both arrived and I am very pleased. I wanted to know if you had
> a internal kick start gear thing. (inside piece you bolt the external kick
> starter to. Also I need the internal piece that you hook the clutch cable to
> right in front of the front sprocket. It is used to push the pin to
> disengage the clutch. The one off the IT490 you sold me has a shorter
> housing than the YZ490 I took it out of. So I need the original one if you
> have it. Please let me know what these items will cost to come to me
> priority mail 17113 Russet Drive Bowie Md 20716 and I will PayPal you
> immediately.
> Thanks again
> Alvin Thomas
>

----- Original Message -----
From: PLT1
To: bikeboneyard
Sent: Friday, June 06, 2003 2:46 PM
Subject: Re: SL175 Tank


Brendan, I got the tank today, everything looks great, Thanks, Paul..

----- Original Message -----
From: Montykm2000@aol.com
To: brendanf@montana.com
Sent: Friday, June 06, 2003 9:07 AM
Subject: parts


> hey i got my parts the other day their in good shape.I might be ordering a couple of more parts from you but i am not sure yet. thanks.
>
>

----- Original Message -----
From: Allison Sibly gahoghton@netspace.net.au
To: brendanf@bikeboneyard.com
Sent: Monday, May 12, 2003 7:30 AM
Subject: CAN AM PARTS


Dear Brendan,

I have received the MX6 wheel and front number plate and was pleased with the condition of it. Thank you.

I was wondering what you have in the way of piggy back style shocks around 400ml long eg. Ohlins, Whitepower etc to suit an evolution style bike.

Thanks

Grant


----- Original Message -----
From: "Dennis Welsh" fourpaws123@hotmail.com
To: brendanf@montana.com
Sent: Tuesday, May 13, 2003 8:29 PM
Subject: Re: cr250


> I received the Mt250 kickshaft yesterday. It looks like a good one.
> Thanks. I'll do business with you again.
> Dennis
>

----- Original Message -----
From: "akimble" bykrmom@earthlink.net
To: "bikeboneyard"
Sent: Monday, May 05, 2003 4:31 PM
Subject: RE: 81 kz-750 ltd parts


> Thanks, Brendan!
>
> I don't know why I bother shopping anywhere else, you always come
> thru! Keep up the great work!
>

> I contacted the bike's owner (a friend) and told her you have the
> goods. Besides Pay-Pal, is there any other arrangements to be made for
> paying you? > She could send a personal check and wait for it to clear or send a
> money order before you ship if that works - just let me know what you
> feel is right.
>
> We think she'll be keeping the front master so we'd just be ordering
> the sprockets and the clutch assembly.
>
> Thanks,
> Angie 'bykrmom' Kimble
> bykrmom@earthlink.net


From: richardw.hunter@gsa.gov
To: brendanf@montana.com
Sent: Friday, May 02, 2003 6:55 AM
Subject: Re: parts for 72 tm-250


>
> Brendan;
> Got my parts yesterday and they were just what I needed. Thanks for you
> help in finding parts and I will be getting back with you for whatever else
> I need! Thanks
> Rick Hunter
>

----- Original Message -----
From: Berry and Lisa Phelps bearlisa@teleport.com
To: bikeboneyard
Sent: Sunday, May 04, 2003 8:49 PM
Subject: Re: 74 Honda 250 Elsonor


Brendan:

Got the Honda Elinsore MT 250 headlight bracket; came in just fine. Thanks for your help in locating this part! Please let me know if you come across any other parts for this model. Thanks again, Berry.



----- Original Message -----
From: Steve Hill sthill@srv.net
To: bikeboneyard
Sent: Sunday, April 20, 2003 4:39 PM
Subject: Re: suz cdi


Brendan, got the Honda XL parts and the check. Thanks you very much. I appreciate good honest business men like yourself and look forward to doing business with you in the future. Thanks again....... Steve Hill


From: "Brian Wilson" wilsonb@city.bloomington.in.us

To: "bikeboneyard"
Sent: Friday, April 25, 2003 12:39 PM
Subject: Re: KT


> Brendan,
> Got the parts. They're great! Thanks again
> Brian



----- Original Message -----
From: Chris Daniel sledneck@worldnet.att.net
To: brendanf@bikeboneyard.com
Sent: Wednesday, April 23, 2003 8:28 PM
Subject: REAR WHEEL


HI BRENDAN, I GOT THE REAR WHEEL FOR MY YAMAHA MINI ENDURO (WOW) BETTER THAN EXPECTED, THANK YOU! YOU ARE A GOOD PERSON TO DEAL WITH.
I HAVE A QUESTION I RECENTLY PURCHASED A 1987
SUZUKI LT230 QUAD IT,S MISSING THE TOP HALF OF THE MOTOR (NO PISTON,CYLINDER HEAD,ETC.)
I WANTED TO KNOW IF YOU DEAL WITH QUADS, IF SO
CAN YOU FIND ANYTHING FOR THIS MACHINE ?
I ALSO NEED A GAS TANK, 2 WHEEL DRIVE NOT 4
AND IT'S CHAIN DRIVEN.
THANX AGAIN, CHRIS



----- Original Message -----
From: Renee Van Matre cajun_na@hotmail.com
To: brendanf@montana.com
Sent: Wednesday, April 23, 2003 4:48 PM
Subject: Re: motorcycle parts


Brendan, I just wanted to let you know that I appreciate your prompt resposes to my emails. You seem to know and practice all the things that keep customers coming back and make a business truly successesful. That seems to be truly rare these days. Thank you for the really great service. Renee Van Matre


----- Original Message -----
From: "JWR" jwroberts@comcast.net
To: brendanf@montana.com
Sent: Monday, April 21, 2003 12:23 PM
Subject: 82 Kawasaki kx-125 (1984 parts will fit )


> I just wanted to let you know that I received these items today. They fit
> and work perfect. Thank you very much.
>
> Have a Great Day,
> John Roberts



----- Original Message -----
From: "akimble" bykrmom@earthlink.net
To: brendanf@bikeboneyard.com
Sent: Friday, April 11, 2003 10:53 PM
Subject: Thanks Brendan!


I just wanted to say THANKS!

The fuel tank for the CB360 arrived on Wednesday. It looks GREAT! The
old gas smells bad, but that won't take long to fix *grin* And the
price was so fair I feel like I stole it!

I will be shopping a lot more as soon as my budget allows it! You're a
life saver!

I have an odd request - do you have a Harley or any other bike there
that has a K&N or other after market air cleaner on it with an 8" (or
so) round chome cover? I am attempting to convert my little 700
Virago's air cleaner setup to look more like a min-Hog. You're probaby
aware these bikes came with a truly UGLY bugeye shaped pod for an air
cleaner cover. I have to get rid of it for pride's sake.



Your newest fan and customer,
Angie Kimble
River Falls, WI
bykrmom@earthlink.net


----- Original Message -----
From: Walt Hackensmith - #142
To: bikeboneyard
Sent: Wednesday, April 09, 2003 7:12 AM
Subject: 78 YZ 250 parts


Hi Brenden!
I recieved the front wheel for my yz250. It looks great! Thank You very much! I will use your service again whenever I can.
Walt



----- Original Message -----
From: Daryl Zeller zell34@btinet.net
To: brendanf@bikeboneyard.com
Sent: Wednesday, April 02, 2003 5:38 AM
Subject: Kawasaki KE 125 1976


Hello, I am the gentleman that purchased the carburetor a few weeks back, LOVE IT, very happy, as I go to put that on, I come to find out, I need a Petcot (don't know if spelled right, the thing on the bottom of the gas tank, to turn on the gas) do you have one for this model of bike? If so let me know, and how much! Thank you for your time ! Daryl


----- Original Message -----
From: Daryl Zeller zell34@btinet.net
To: brendanf@bikeboneyard.com
Sent: Wednesday, April 02, 2003 5:38 AM
Subject: Kawasaki KE 125 1976


Hello, I am the gentleman that purchased the carburetor a few weeks back, LOVE IT, very happy, as I go to put that on, I come to find out, I need a Petcot (don't know if spelled right, the thing on the bottom of the gas tank, to turn on the gas) do you have one for this model of bike? If so let me know, and how much! Thank you for your time ! Daryl


----- Original Message -----
From: dustin jahnke maxim751@msn.com
To: brendanf@montana.com
Sent: Tuesday, April 01, 2003 7:57 PM


The exhaust arrived today, and after a little modification they went right on. It will work out great and the bike sounds much better. Thank you for the good service and the prompt response.
Look forward to doing business with you in the future
Dustin Jahnke


----- Original Message -----
From: Wcycledan@aol.com
To: brendanf@bikeboneyard.com
Sent: Sunday, March 30, 2003 7:45 PM
Subject: Yamaguchi


Hi Brenden, I received the Yamaguchi the other day, all arrived in good shape,It was better than I expected, I had picked up another identical bike recently which has the missing wheels, I should be able to come up with one 90% complete bike, Keep me in mind if you run across anything on this oddball bike in the future, Thanks, Ed


----- Original Message -----
From: "Rimando, Daren" Daren.Rimando@kla-tencor.com
To: "'bikeboneyard'" brendanf@montana.com
Sent: Wednesday, March 26, 2003 6:02 AM
Subject: RE: Flywheel, Complete Stator, CDI Box for 78 DT 100 or newer


> Brendan,
>
> Just wanted to let you know I received the parts yesterday. Great Shape &
> thanks!
>
> Daren

----- Original Message -----
From: "Ken Lusk" luskk@us.ibm.com
To: brendanf@bikeboneyard.com
Sent: Monday, March 24, 2003 12:56 PM
Subject: Rickman frame

Brendan,
Just a note to let you know I received the frame and parts,
everything looks good. Thank you ..................Ken



----- Original Message -----
From: dave21ryan@adelphia.net
To: brendanf@bikeboneyard.com
Sent: Thursday, March 20, 2003 8:09 PM
Subject: 71 Yamaha Rt-1B Enduro parts

Hey Brendan, got the wheel, it is great, thanks a lot! Just need to ask a couple questions on other parts: the headlight for the 71 360, is the chrome ring good? does it have the hi beam indicator lamp on top? I also need the filter cage the element goes around for the airbox if you have one in good shape. Please let me know, and thanks for all your help,
Dave Ryan



----- Original Message -----
From: "Jason Schaitel" jason_schaitel@yahoo.com
To: brendanf@bikeboneyard.com
Sent: Saturday, March 15, 2003 8:23 PM
Subject: 84 kx125 part needed


> how much for that suspension linkage? looks like it is one of the adjustable
> height kind?
>
> By the way the seat you sold me for the 84 KX250 was nice, not rips, mold or
> anything, thanks. I am glad you are in business.
>
> Jason Schaitel
>
> =====
> Jason Schaitel
> Microsoft Certified Professional
> > 816-804-9585 (c)

----- Original Message -----
From: "Wayne Thompson" batman57@cox.net
To: "bikeboneyard" brendanf@montana.com
Sent: Friday, March 14, 2003 5:57 PM
Subject: Re: Notification of Payment Received


> Received the carbs. Perfect exactly what I needed. Thanks! How about a

> right hand mirror?

----- Original Message -----
From: The Bowser's BWZFamily@blkhawk.net
To: brendanf@montana.com
Sent: Tuesday, March 04, 2003 9:02 PM
Subject: Re: parts


got the parts today they where right and both in great shape ,Thanks Jim


----- Original Message -----
From: ERIC MORTON mortonpartyof4@msn.com
To: bikeboneyard
Sent: Tuesday, February 25, 2003 10:20 PM
Subject: * [cycle] CycleRecycling-part


Brendan,
Just wanted to let you know I got the side cover today and I am very happy with it. I appreciate your patience and the time you took to send it to me.
Eric


----- Original Message
From: Tloip260@aol.com
To: brendanf@bikeboneyard.com
Sent: Saturday, February 22, 2003 4:13 AM
Subject: CB750k circ.1976


Sir; would you happen to have a front caliper for the above bike. P.S. I bought a motor from you for a FA50 it runs beautiful thanks a lot . Bob Mendelson tloip2602 aol.com

----- Original Message -----
From: robert scavone
To: brendanf@bikeboneyard.com
Sent: Tuesday, February 11, 2003 8:10 PM
Subject: oil tank f7


hey, just received the oil tank for my f7 you sent me. thanks alot, its just what i pictured it would be. thanks again will call if i need you. robert


----- Original Message -----
From: "Rimando, Daren" Daren.Rimando@kla-tencor.com
To:
Sent: Thursday, February 13, 2003 1:09 PM
Subject: Saying Thanks!


> Brendon,
>
> Got the Harness, Rectifier, Flasher & Kicker (DT 125) for my 74 Yamaha DT
> 100.....all look in great shape, so again, Thank


>
> Daren
>

----- Original Message -----
From: "keith geisner" kgeisner@hotmail.com
To: brendanf@montana.com
Sent: Wednesday, January 29, 2003 12:21 PM
Subject: Re: kdx 400


> Brendan,
> I received the parts today and I'm very happy with them. Thanks again,
> Keith

----- Original Message -----
From: Raider cannondale64@charter.net
To: bikeboneyard
Sent: Wednesday, January 29, 2003 8:48 PM
Subject: Re: **spamTrapper 06.60** Re: 75 xl-100


Thanks brendan for the coil works great!!!!!!!

----- Original Message -----
From: OldWheelsMC@aol.com
To: brendanf@montana.com
Sent: Tuesday, January 28, 2003 9:47 PM
Subject: Re: CA77 Handlebars


Thanks Brendan, I enjoy going through your site. It's one of the better ones and most easily navigated. Steve


----- Original Message -----
From: Andrew Parks nscworksbikes@ameritech.net
To: bikeboneyard
Sent: Wednesday, January 15, 2003 11:05 PM
Subject: Re: tc 125 parts


Brendan,
I got the head today. Exact match and in 100% better condition than the one it replaced. My customer and are very satisfied! Thank you very much!

Andy

----- Original Message -----
From: Wayne Murphy
To: bikeboneyard
Sent: Monday, January 06, 2003 12:44 PM
Subject: Hodaka Forks & Fenders


Brendan, the Hodaka parts I just received from the Bikeboneyard are great! When I receive parts from the bikeboneyard, they are carefully packaged, with small hardware in a container. I am impressed that the parts I order include associated hardware i.e. bolts, nuts washers and special fittings. The fork assembly looks like new!

Thanks again,
wayne@pennsy.com



----- Original Message -----
From: Mike/map mapautomotive@worldnet.att.net
To: bikeboneyard
Sent: Thursday, January 02, 2003 10:07 PM
Subject: Praise



Brendan sold me a 73 Ossa SDR and the bike was everything he said it was!
The shipping was fast and packed very well ! Nothing broken or bent !!
I live in Pittsburgh PA. and just got SCREWED by a guy that lives 15 mi. away!
All I can say is if your looking to buy a bike or parts from BRENDAN he keeps his word! and that's RARE today on the net ................

Mike/Map351
Leechburg PA.

----- Original Message -----
From: Djjmnjr@aol.com
To: brendanf@bikeboneyard.com
Sent: Monday, December 09, 2002 8:13 PM
Subject: 84 cr 125


BRENDAN, I JUST WANTED TO LET YOU KNOW THAT I RECIEVED THE PARTS TODAY AROUND 7:OO PM AND WANTED TO LET YOU KNOW THAT IM VERY IMPRESSED WITH THE PARTS THAT YOU HAD SENT. I WILL RECOMMEND YOU TO OTHER PEOPLE . ALSO IN NEED OF THE BOLTS THAT THE EXHAUST MANIFOLD GO THRU AND THE EXHAUST MANIFOLD NOT SURE IF THAT IS THE PROPER NAME FOR THAT PART I'LL SEND YOU A PIC THANKS AGAIN .....

----- Original Message -----
From: Mike Botkin
To: brendanf@bikeboneyard.com
Sent: Monday, December 09, 2002 11:29 PM
Subject: Wow, very reasonable prices!


Finally someone living in the internet age. Prices on the internet are often WAY better than at salvage yards. I understand that running a business has costs to it as I owned a computer store for 7 years. Everytime I get on the internet to a salvage yard I wonder if people understand. I was looking for some parts for a friend of mine and was quoted 350.00 for a stock exhaust, and 150.00 for a stock seat for a 1985 FJ-1100!!! when I replied sarcastically "how about a million dollars for a footpeg", a series of derogatory e-mails ensued



.
Anyway, from what I've seen , I and all my bike riding friends will be buying parts from you.

My Bikes: 90 Katana 750, 76 RD 350, 87 SRX 250, 83 XT 550, 76 MT 125, 81 Seca 550.

All my friends are Multi-bike enthusiast also.


Thanks Mike


----- Original Message -----
From: CNerad6650@aol.com
To: brendanf@montana.com
Sent: Monday, December 02, 2002 5:32 PM
Subject: Re: Parts order


Thank you very much for your quick responce. And it came VIA UPS today. Sorry for the worry but we are rebilding a 12 year old's dirt bike so he was driving us nuts.

Also do you have a gas tank for a RT180 if not do you know where I can get one????

Thank You,

Bryan Turner

----- Original Message -----
From: davidmarden davidmarden@netzero.net
To: bikeboneyard
Sent: Monday, December 02, 2002 11:02 AM
Subject: parts


thanks for the parts ,great service ,thanks again will do more bus. with you in future

----- Original Message -----
From: Jason Dean
To: brendanf@bikeboneyard.com
Sent: Saturday, November 23, 2002 6:59 PM
Subject: yz 80


Hey Brendan

I received the cr parts they worked great, I saw that you have an 88 yz 80 tank listed, do you still have it and is it white. Thanks Jason

----- Original Message -----
From: Keith4Bass@aol.com
To: brendanf@bikeboneyard.com
Sent: Wednesday, November 27, 2002 8:41 PM
Subject: 71 rt-1 360 parts


Brendan,I just received rear fender i ordered from you.Looks great, really appreciate you helping me out.Just thought id drop you a line .

thanks again ,Bill hackman

----- Original Message -----
From: Robert Mowbray
To: bikeboneyard
Sent: Saturday, November 16, 2002 2:33 PM
Subject: Re: sl-70 Payment


Hi Breadan. I received the sl-70 ,it got here on thursday .I was wondering you said you have the bill of sale for that bike ,could you send it to me . Thank you very much ,the bike is real nice shape.

Nice doing buisness with you ,and I just wanted to thank you again

Take Care,

Robert Mowbray



----- Original Message -----
From: PJWKXRACR@aol.com
To: brendanf@montana.com
Sent: Thursday, November 14, 2002 9:38 PM
Subject: mx fender


> Hey Brendan,
> The mx125 fender arrived today.... thanks much for the nice piece and quick
> delivery.
> Talk to you later,
> Pete



----- Original Message -----
From: Steve Rognas (srognas@aeroinc.net)
To: bikeboneyard
Sent: Monday, November 11, 2002 7:01 PM
Subject: Re: kawasaki kd125


hello again brendan. got my parts. thanx man. price was right and service was excellent!!!! you are AWESOME!! looking for some more stuff. please let me know if you can help.
1) kick start lever for the kd 125
2) air cleaner and or cover for same
3) front fender for same
4) speedo cable for a benelli mini-bike or mini-enduro
5) throttle for a benelli mini-enduro
6) need some bridgestone stuff. just wanted to know what you had for bikes
7) rockford motors taka. saw the tank listed. can you tell me what color it is? also, any other parts?
8) 75 yamaha dt 400. looking for ignition switch with key(yes, i'm serious)
9) how about a '79 kawasaki klx 250?

yes, i know it's a weird list. these a some of the projects i'm working on now. it'll be a miracle if i can get just one done. thanx for your time. steve


----- Original Message -----
From: F1004MEA@aol.com
To: brendanf@montana.com
Sent: Friday, November 08, 2002 1:49 PM
Subject: Re: 81 RM 125 part


Hi Brendan! I received the RM125 parts yesterday! They are better than I expected. Especially the rear sprocket. Getting the airbox from you really saved me. The one the bike had was just a foam thing (hokey).
I forgot to ask you if you have a front rim for this bike (81 RM125). Mine has a dent in it. If so, how much with ship?
Thanks alot, and I gave your info to others to help keep up your excellent parts sourse!!! Mike


----- Original Message -----
From: Adam Lassiter
To: brendaf@bikeboneyard.com
Sent: Friday, November 08, 2002 10:22 AM
Subject: Parts



brenda whats up,

i need some more parts for my suzuki ts-100. i need a seat cover, a fly will cover, and if possible a pipe, i know you have that ts-90cc and i was wondering if those parts would be a fit to my 100cc. let me know if any of these parts are available.

also thanks again for the carburetor and fast service now im waiting on rings from a suzuki dealer i wish you could tell him what fast service is.



----- Original Message -----
From: Patrick Booker
To: bikeboneyard
Sent: Tuesday, November 05, 2002 12:43 PM
Subject: Re: KE 250


Got the parts today, everything looks great! Thanks a bunch, I'll let you know if I need anything else.
Thanks again,
Patrick



----- Original Message -----
From: "Mike Shoger" mshoger
To: "'bikeboneyard'" brendaf@montana.com
Sent: Friday, November 01, 2002 9:48 AM
Subject: RE: SwapMeet - RE: parting 68-79 honda ct-90, cb-77, 78 cb-


> Received the cb750 seat hinges today. Looks good and thanks very much for
> the quick service
>

----- Original Message -----
From: jb217@
To: "bikeboneyard" brendaf@montana.com
Sent: Thursday, October 24, 2002 6:10 PM
Subject: Re: Shipping for 72 Honda Sprocket Cover


> Guys - Just wanted to thank you for sending the part right out. Was all
> I was waiting on to get the bike back on the road. Look forward to doing
> business with you again. You guys are the best. - Jim
>
>

----- Original Message -----
From: MarkettePirtle
To: brendaf@bikeboneyard.com
Sent: Wednesday, September 18, 2002 6:27 PM
Subject: 83 CX650


I got the parts today. Thank you a bunch. They look good. Do you happen to still have the right side cover and if so I would like to purchase it also.


Thank you,


Markette Pirtle


----- Original Message -----
From: Loudastro
To: brendaf@montana.com
Sent: Thursday, September 12, 2002 11:07 PM
Subject: Re: it 400 pipe

v hey i got the pipe today,thanx again i'll keep you in mind when i need some parts,thumbs up!

----- Original Message -----
From: Mel
To: bikeboneyard
Sent: Tuesday, September 10, 2002 2:13 PM
Subject: Re: 1979 kz 750 twin


money order on its way best response time ever from a salvage yard you can expect a lot more business from us.
Mel

----- Original Message -----
From: "Vintage Dirt Bike"
To: "Vintage Dirt Bike"
Cc: <>
Sent: Tuesday, September 10, 2002 10:58 AM
Subject: RE: Suzuki 125 tank, orange with white stripe


> Brenda,
>
> Just wanted to know that I really appreciate the tank that you sent me. It
> allowed me to put a low milage bike to workable condition, and it maintained
> the low milage look. The tank looked great, and it had zero rust in it,,and
> looked great. Thanks again.
>
> Sincerely, Jeff Nolen
> Vintage Dirt Bike
> www.vintagedirtbike.com
> Phone: 713 896 9668
> Fax : 713 461 9424

----- Original Message -----
From: PJWKXRACR
To: brendaf@montana.com
Sent: Tuesday, September 03, 2002 10:39 PM
Subject: bar arrived


Hey Brenda,
The YZ h-bar arrived today... thanks much for another smooth deal. Sorry about the shipping $ mixup.
I may need that MX125 airboot after all... I had a line on an NOS piece that fell through and another one in the works. I'll let you know...
Pete


----- Original Message -----
From: steve sabjan
To: bikeboneyard
Sent: Wednesday, September 04, 2002 12:29 PM
Subject: Re: Can-Am parts


Tank was received yesterday. Looks good. Thanks.
Steve.

----- Original Message -----
From: "CLAIBORNE,ANDREW
To: "'bikeboneyard'"
Sent: Tuesday, August 27, 2002 10:09 AM
Subject: RE: Kawasaki MT-1 parts



> Hey There,
>
> Thanks for checking!
>
> I have to say, your web site, motorcycle collection, and prices are amazing!
> I might be emailing you about getting a complete bike soon.
>
> Thanks for the quick response and great site!
> -Andy Claiborne
>


----- Original Message -----
From: Jason Rodgers
To: brendaf@bikeboneyard.com
Sent: Sunday, August 25, 2002 11:30 AM
Subject: parts for a 84' xl350r


Hi Brenda


I ran accross your website when I read "bob"'s post on the xl forum raving about your site. Anyways.. back to the parts I need... my bike was almost stolen when someone thought they could stick a screwdriver in the ignition and break the steering lock. Luckily they were unsucessful in their attempt, but managed to mangle the ignition so bad that I couldn't get my key in to turn it anymore. So, I need a new ignition that would work on my bike, and I'd also be interested in purchasing a few other parts from you. Let me know if you can help me out w/ the ignition, or perhaps know of someone I can talk to for help. I'm not even sure what years/bikes would be able to donate this to me. Thanks, and God bless,

Jason


----- Original Message -----
From: "Tipton, David T (BP Solar)"
To: "'bikeboneyard'"
Sent: Friday, August 23, 2002 6:18 PM
Subject: RE: 82 YZ80 parts

> Brenda,
> Just got my parts in. Everything looks great. Thanks again. I will
> buy from you again if i get the chance.
> Dave in Va.


----- Original Message -----
From: Camie Richards
To: brendaf@bikeboneyard.com
Sent: Monday, August 19, 2002 10:21 AM


Hey Brenda,


I recieved my fender today! It looks great! pleasure doing business! Now what can you show me in a yellow gas tank for the same model (late 70's pe 250)?


br>

From: Bob L.
To: bikeboneyard
Sent: Wednesday, August 14, 2002 5:46 PM
Subject: Re: Honda Aero 80


Brendan,
I recieved 84 Aero Carb in better condition than I expected.
Bolted it on and runs like a raped ape.
Thanks for all your help.
Letting my friends know about your site.

Thanks Again
Bob



----- Original Message -----
From: Camie Richards
To: brendaf@bikeboneyard.com
Sent: Monday, August 12, 2002 4:31 PM
Subject: thanks


Thanks for the kick starter it worked out great! I need a front fender for the 78 pe 250 Suz. yellow in color. Thank you again! Camie


From: Joe
To: bikeboneyard
Sent: Friday, August 09, 2002 11:33 PM
Subject: *****spamTrapper***** thanks Brendan loving this seat!!!!



Hey Brenda thanks for the seat bud it's SWEET!!! loving it better than the damb towle I had rapped around a pice of mettal .thanks again , how much do you want for the complete turn signal assembly with harness and blinking device?? and I need the tail light assembly too. let me know a price


----- Original Message -----
From: Raymond Young
To: bikeboneyard
Sent: Monday, August 05, 2002 6:48 PM
Subject: Re: 1980 Kawasaki kz550a - Parts Request


Hi Brenda!
I received the kick starter and the check today.
The kick starter was excellant!!
If I need anything else I will give you a call!
Nice doing business with you.
John




----- Original Message -----
From: ccasey
To: brendaf@montana.com
Cc: c.casey
Sent: Monday, August 05, 2002 7:02 PM
Subject: rad arrival


> brendanf:
> rad for vf 500 arrived in very good shape. excellent.
> thanks
> ccasey@
>

From: "Ayers Michael D."
To: brendaf@bikeboneyard.com
Sent: Tuesday, August 06, 2002 11:18 AM
Subject: cx 650


> Hi again, thanks for the carbs, they worked out great. Do you still
> have the ignition stator for the cx 650? and also how about the
> Regulator/rectifier, I am tracing a battery charging problem out of
> mine, and it is looking like it may be one of these two components. If
> you have the regulator please let me know the price, total w/ shipping.
>
> Thanks
>
> Mike Ayers
>

----- Original Message -----
From: The Donington's
To: bikeboneyard
Sent: Monday, July 22, 2002 7:39 PM
Subject: yamaha parts


Hi Brenda,
just a few words to let you know that the parts arrived on Saturday ,and they are perfect. thanks very much.
cheers Carl


----- Original Message -----
From: Jason vintage_
To: bikeboneyard
Sent: Wednesday, July 03, 2002 11:41 AM
Subject: Re:


Thanks Brenda,

Just to let you know: I frequently hear from other motorcycle enthusiast that you are a good person to deal with...THANKS. I'll be using and checking out your board.

Jason

----- Original Message -----
From: "Robert&toni olsen"
To: "bikeboneyard"
Sent: Tuesday, June 18, 2002 1:12 PM
Subject: Re: SwapMeet - RE: 79 kawasaki kx-125 parting


> carb worked out great, thanx!!!
>
> Thanx Robert & Toni
>

----- Original Message -----
From: Raider
To: brendaf@bikeboneyard.com
Sent: Monday, June 17, 2002 7:26 PM
Subject: L-2


Hi brenda i just recieved the cap and fork boot for the L2 yamaha both parts are in very good condtion, thank you very much and im looking forward to doing more business with you in the near future thanks again........Rick


----- Original Message -----
From: Penny Lang
To: brendaf@bikeboneyard.com
Sent: Wednesday, June 12, 2002 4:14 PM
Subject: parts & stuff


Hi! Brenda, Ron Fluke again, thanks for shipping the rear wheel assy, and alloy front fender.
I am stoked parts are in good shape . In the near future I am going to need some more parts. You will be hearing from me.
Regards: and thanks Ron Fluke


----- Original Message -----
From: "Kevin Kraushaar"
To: "'bikeboneyard'" brendaf@montana.com
Sent: Tuesday, June 11, 2002 9:39 PM
Subject: RE: Honda CT90 carb & Intake


> Hi , I recieved the carb and everything looks great! You run a standup
> business!
>
> Thanks so much.
>
> Kevin.
>

----- Original Message -----
From: "Chris Norloff"
To: "bikeboneyard" brendaf@montana.com
Sent: Thursday, June 06, 2002 6:03 AM
Subject: Re: TL/XL 125 kicker



> Thanks! The kicker got here yesterday (Wednesday) and it fits great.
>
> Many thanks for the speedy response. I'm really looking forward to riding this weekend.
>
> best,
> Chris Norloff

----- Original Message -----
From: NPOOLER
To: brenda
Sent: Thursday, May 23, 2002 3:19 PM
Subject: Re: SR500 parts


Brenda - Received Yam parts today in good shape. Thanks for the good service.

Neil


----- Original Message -----
From: ThunderXI@
To: "bikeboneyard"
Sent: Wednesday, May 22, 2002 7:17 PM
Subject: Re: carbureter


> ok thanks Brenda,
> Ill take it off your hands then. I appreciate your quick responses and
> good parts. Every part Ive got from you has worked just fine
>
> Thanks


----- Original Message -----
From: PG kent
To: brendaf@montana.com
Sent: Thursday, May 09, 2002 6:25 AM
Subject:yl1
Hey Brenda: Just thought I'd let you know that I finally got that left exhaust
on my Yamaha YL1 twin 100 cc bike....I got it pretty cleaned up inside and out
and put it on Tuesday night..boy!....what a difference the in the sound now..
.nice and quiet...I will try to fix my other left pipe I took off...the baffle
is shot and one of the loops inside the pipe has moved out of place..
but I think I can fix it...anyway...just wanted to say thanks for the part
I bought from you last fall...do you remember?...hope you do..take care..you
were a big help in getting my bike restored and back to the roads...
talk another time..regards..Paul Kent..


----- Original Message -----
From: Craig Peringer
To: brendaf@bikeboneyard.com
Sent: Sunday, May 12, 2002 10:24 PM
Subject: 1978 Honda XR75


Thanks for the shock for my Suzuki JR50, it worked perfect. Now my next project
is finding a left engine sidecover for a 1978 Honda XR75. Can you help?


----- Original Message -----
From: James Klones
To: bikeboneyard
Sent: Wednesday, April 24, 2002 12:31 PM
Subject: Hi Brenda


Just wanted to take a moment to thank you for the nice Kawasaki wheel, and the timely manner in which you sent it!

Thank you very much!!!!

Jim KIones
Mukilteo, Washington


----- Original Message -----

From: Sublim5450.com
To: brendaf@bikeboneyard.com

Sent: Thursday, April 25, 2002 1:12 PM
Subject: Hello


My name is josh I bought a 200s honda motor form you. It works great!
Thanks
You also hove listed a KX 125 are you only parting that bike out or will you sell whole? If so how much thank you for your help!


----- Original Message -----
From: tony
To: Brendan
Sent: Thursday, April 25, 2002 8:54 PM
Subject: Thanks


Greetings,

Received the headlight and cheque yesterday. Thank you for both. I appreciate doing business with you. I'll add another satisfied customer to your bulletin board.

Tony Konkolus
T-KON Enterprises

----- Original Message -----
From: "Bill" gonfishnnet
To: "bikeboneyard"
Sent: Thursday, April 25, 2002 3:30 PM
Subject: Re: 1975 honda gold wing GL1000


> Thank You...Got the parts today..bolted right up...You are all
> right....Thanks again...Im gonna keep your addy for future reference...
>

----- Original Message -----
From: Bill Crisan
To: bikeboneyard
Sent: Thursday, April 25, 2002 10:48 AM
Subject: Re: 1980 Maico parts



Brenda
The forks arrived here today A-OK. They look great.
Thanks for your patience on this deal.

Any other 1978-1982 Maico parts in stock? Thanks once again
Bill

----- Original Message -----
From: Lisa Peterson
To: bikeboneyard
Sent: Tuesday, April 16, 2002 10:37 PM
Subject: Re: honda kickstarter


hello, I just recieved the kicker monday, thanks for being so fast. it looks good. david


From: "David Neves"
To: brendaf@bikeboneyard.com
Sent: Tuesday, April 16, 2002 11:52 AM
Subject: THANKS!!!!!!!!!!!


> Hey Bike Boneyard, Thanks for the great deal on the parts I needed. Will be
> back for more later. Dave in CA

----- Original Message -----
From: CANDTOM
To: brendaf@montana.com
Sent: Thursday, April 04, 2002 3:53 PM
Subject: Re: honda parts


Brendan thank you for the excelent service. I recieved the parts today and they look
great. Thank you. Tom Mavaro


----- Original Message -----
From: "Barrows, Philip"
To: "'bikeboneyard'"
Sent: Thursday, March 28, 2002 2:00 PM
Subject: RE: 1974 KX125 TANK


> Brenda,
> \
> Got the tank.. Looks good. accurate description.
>
> thanks, I'll keep tabs on ur site.
>
> Feel free to email with any KX125 items U have.
>
> Phil
>

From: James Klones
To: brendanf
Sent: Tuesday, March 26, 2002 11:21 PM
Subject: Hi Brendan


Thanks for coming through with the gas tank latch for the 450 Honda. It works perfect and I really needed it.

Thanks again,

Jim Klones
Mukilteo v


----- Original Message -----
From: TERRY W PARRIS
To: bikeboneyard
Sent: Tuesday, March 26, 2002 9:58 PM
Subject: THANKS



THANKS, FOR THE QUALITY SHIPPING OF A FIRST QUALITY TACH.

WORKS GREAT!!!!!!!!!!!!


----- Original Message -----
From: cemoto
To: bikeboneyard
Sent: Saturday, March 23, 2002 5:52 PM
Subject: Re: Bultaco M-168


Hi Brenda
I got the airbox today and it is in great condition, just like you said. Thank you very much.
Regards,
Al

Albert C. Sandy

cemoto@.com

----- Original Message -----
From: JReynolds
To: brendaf@montana.com
Sent: Thursday, March 21, 2002 8:30 AM
Subject: RE: YL2 Trail



> Morning Brenda
>
> I got the cylinder the other day. ITs in great shape. Thanks... What would
> you take for the remainder of the yl2c parts that you have listed?
>

----- Original Message -----
From: Mike Werwie
To: bikeboneyard
Sent: Monday, March 18, 2002 10:45 PM
Subject: Re: km100 parts


im very happy with the kawi parts! thanx. hey i have a 1983 Honda XR200R Im looking 4 parts 4. please let me know if u have 1 for parts or any parts 4 it thanx!!

----- Original Message -----
From: Neil and Debbie
To: bikeboneyard
Sent: Wednesday, February 20, 2002 2:06 PM
Subject: Re: foot pegs


Thanks!!! I got them today in fact.
They look nice. I look forward to doing more business with you.
Neil

----- Original Message -----
From: "thomas h. boyd"
To: "bikeboneyard"
Sent: Tuesday, February 19, 2002 5:52 PM
Subject: Re: parts


> Thanks,
> I got the parts after I e-mailed you, the rack looks great & im well
> pleased, keep me in mind if you gun across a key switch to fit the 72 r v
> 90 suzuki it's
> a 9 wire harness 3 way switch. thanks agian.
>
>
> Thomas

----- Original Message -----
From: WEB
To: brendaf@bikeboneyard.com
Sent: Friday, February 15, 2002 11:25 AM
Subject: MT 250


Brenda,

My buddy received his motor and other parts for his Honda MT 250 great job!!The motor runs excellent no oil leaks.The same person is looking for the rear shocks for the same bike, if you have them available can you please send a couple pics.Also would you have a rear wheel available for a 80 KDX 175.(Also the prices).

Thanks keep up the good work.

Tom.

----- Original Message -----
From: Kevin Funkey
To: bikeboneyard
Sent: Saturday, February 09, 2002 6:54 PM
Subject: gt 185


Hi I bought a gt 185 engine from you a couple weeks ago. It works great thanks. If you come across another gt 185 engine please write back. I also would like to know if you have gotten any trail bike 125cc and lower. thankyou

Kevin

----- Original Message -----
From: "Jason Oetting"
To: brendaf@montana.com
Sent: Monday, February 04, 2002 1:12 PM
Subject: Re: CB350F Sidecover?

> Hi,
> I recieved the sidepanel today. Thanks for the fast shipping and good
> product.!!
>
> Do you have any ideas for a set of "cafe" style handlebars for this bike?
> (72 Honda CB350F) I would like low bars but unsure about sizing i will
> need.

>
> Any help would be great,
> Thanks again,
> Jason Oetting

----- Original Message -----
From: Colin Gunn
To: bikeboneyard
Sent: Monday, February 04, 2002 10:50 PM
Subject: Re: 79 MX 100 FORKS


Brenda,

Received the MX forks today. They are in great shape as you described! Thanks for the fine service.

Also wondering if you have an MX/DT 100 engine in good condition? As it turns out the one in my son's 79 Mx 100 has main bearings are ready to go (lots of movement in the fly wheel!). Not sure if I should tackle this fix or look around for something

Thanks.

Colin in Canada

----- Original Message -----
From: "Dave Dancer" dancer_dave
To: brendaf@montana.com
Sent: Wednesday, January 16, 2002 6:56 AM
Subject: Re: rm370a

> Brenda,
>
> I received the forks and wheels yesterday and just wanted to let you know
> how pleased I am! Everything looks great and is a huge step in completing
> this bike project.
>
> Thanks for everything!

From: "karel claeys"
To: brendaf@montana.com
Sent: Sunday, January 13, 2002 9:01 AM
Subject: Re: Re:


> hello,
>
> the honda z50 tank has arrived. he is perfect.
>
> don't you have an engine guard or that little shield to protect your plug
> from a ct70?
>
> sincerely,
> karel claeys

----- Original Message
From: Eqynexprssl.com
To: brendaf@montana.com
Sent: Friday, January 11, 2002 3:03 PM
Subject: CT Parts


Hey Brenda.....got the forks yesterday....should work out great!

Thanks for the fast shipping and quality part!!

Take care...
Brett

----- Original Message -----
From: DUFFJEREMY
To: brendaf@montana.com
Sent: Wednesday, January 09, 2002 2:00 PM
Subject: Re: DT360 parts
> I received the fender today. Thank you very much, it is in excellent
> condition. If you happen to come across a rear fender for the rt-3, I would
> be interested.
>
> Thanks again,
> Jeremy

From: Tommy Jansson netvoikguy
To: bikeboneyard
Sent: Tuesday, January 08, 2002 10:14 AM
Subject: Parts
Hi Brenda
The CL450 wheel came yesterday .. I am so please with it. Thank you.
I tried to get to your web site this morning, but could not access it, my PC
has been acting up though. So I'll ask via direct email.
I recently aquired a CB350/F. I remember seeing one list on your web site.
Do you have the rear wheel for this bike? Also the seat and instrument panel.
Thats that little box with the status lights on it.
Also do you have a set of Cb750 K or F rear shocks? Hopefully the 1979 to 1982
style without that little cup at the top, the springs are fully exposed.
let me know,
tommy

Hello Brenda
The MX4 front wheel arrived today, looks great!
I hope you had a happy holiday.
Regards, Joe
----- Original Message -----
From: bikeboneyard
To: Joseph Clegg
Sent: December 21, 2001 10:35 PM
Subject: Re: CanAm MX3 Front Wheel

----- Original Message -----
From: Vidal Dabis
To: brendaf@montana.com

Sent: Wednesday, December 05, 2001 8:59 PM
Subject: 75 Yamaha parts


Thanks Brenda..just recieved the parts..looks great!! Can't seem to find the ball bearing..no problem..I'll try to locate one at the dealer. Again..thanks again..Vidal

----- Original Message -----

From: "Bruce Lynn" ecurb@.com
To: "'bikeboneyard'" brendaf@montana.com
Sent: Wednesday, December 05, 2001 1:50 PM
Subject: RE: 1974 DT 360A Engine complete


> Hi Brenda,
> I just received the motor today. I like the way you packed that thing
> up. I really appreciate the quick response and patience. I try to send
> some business your way. I send you a picture when I get it on the bike.
>
>
> Thanks,
> Bruce

----- Original Message -----
From: blbrend@
To: ""bikeboneyard"" brendaf@montana.com
Sent: Wednesday, December 05, 2001 6:56 AM
Subject: RE: atc110 motor


> "bikeboneyard" brendanf@montana.com wrote:
>

> >i just got a letter from you about the 110 motor. did it arrive yet? thanks
> >brenda > >for more info log on to www.bikeboneyard.com or call 406-777-5161, cell phone 406-550-3126, 406-239-4254
> >my address is brenda fennessy, 848 upper sweeney creek loop, florence, mt 59833
> >want to use your credit card? use paypal and earn $5 by clicking on the following linkv
> >https://www.paypal.com/refer/pal=brendaf%40montana.com
> ++++++++++++++++++++++++++++++++++++++
>
>
> Dear Brenda
>
> I recieved you motor about a week ago.
> I was delighted to find the motor in such good condition.
>
> I looked on a map and where you live must be one of most beautiful
> places in the United States, with the Bitterroots to the west and
> Sawtooth to the east. I worked in Yellowstone Park for two summers in 1958-59 for the National Park Service and I have missed the Rockies ever
> since. Is there a river running thru Florence with trout in it?
>
> Erling in Texas.
>

From: "RCE of Macon" rce.net
To: brendaf@bikeboneyard.com
Sent: Tuesday, December 04, 2001 9:10 AM
Subject: CB350F Tank - Got IT!


> This is Chris in Macon. I got the tank this morning. It looks great!
> I just got through rebuilding the carbs, So I'll be riding this afternoon!
>
> Thanks!
>
> Chris Hatcher
> thehatch@com
>

----- Original Message -----
From: "Sy Griffey" sgriffey@com
To: brendaf@montana.com
Sent: Monday, November 19, 2001 5:56 AM
Subject: Yamaha '74 DT-175
> Brenda,
> After receiving all the parts last week and with the help of a good friend
> that put me onto your site......we got the bike running this weekend. My son
> is really excited with his first motorcycle. It was a pleasure doing
> business with you and I will not hesitate to recommend bikeboneyard to
> friends. Thanks for all your help.
> Sy Griffey
>

----- Original Message -----
From: DRuok
To: brendaf@montana.com
Sent: Friday, November 16, 2001 3:33 PM
Subject: Re: yamaha parts received
Bren, just like to say I received the parts last night, they were just as promised, thanks for an honest, square deal. I am very pleased.
Dave

-----Original Message-----
From: Chris Kern ckern
To: brendaf brendaf@montana.com
Date: Saturday, November 10, 2001 6:57 PM
Subject: Re: 74 Yamaha Dt 250
Thank you brenda the seat will work great! it's been a pleasure doing business! Chris

Brenda F in MT is great . I got some Can Am parts from him and got a great deal. Thanks again.
Sent From: 66.44.66.33 (66-44-66-33.s33.tnt7.lnhva.md.dialup.rcn.com)
Phone: 703-522-7740

-----Original Message-----
From: Mareno Gjerdsbakk marenog
To: brendaf
Subject: Kawa

-----Original Message-----
From: Mark& Angie aufever@pacbell.net
To: brendaf
Date: Friday, February 09, 2001 7:56 PM
Subject: Re: SwapMeet - RE: parting honda, kawasaki, suzuki, yam
>Brenda! Got the motor today! Thanks! Nice tub too! The UPS driver liked the
>tub idea ! Thanks a lot for coming through! Cant wait to get into it !
>If you need a reference ever, email me!
>
>Best Regards, Mark
>

Hi,got the parts today.They looked better than I could hope for.
Thank you.
Happy new year
Mareno


Steve Metz smtguitars
Arlington, VA USA - Saturday, January 06, 2001 at 12:03:42 (CST)

-----Original Message-----
From: carl steinbach vintageverde
To: brendaf brendaf@montana.com
Date: Wednesday, September 26, 2001 12:07 PM
Subject: kx
Brenda
I received the parts today. Two words-Totally Excellent! Thanks, Carl

-----Original Message-----
From: Slivka joking
To: brendaf@bikeboneyard.com
Date: Wednesday, October 03, 2001 6:59 PM
Subject: Beta
HI
Brenda
In your latest post on Jeff's Swap Meet. You have your Beta listed @ $500. If that is the new price and it still runs,
let's make arrangements to ship it.
The 125 Penton arrived with out a problem, It's one of the better project Pentons that I have picked up lately.
Thanks,
John Slivka

-----Original Message----- From: JAYZXR
To: brendaf@montana.com
Date: Sunday, October 14, 2001 5:10 PM
Subject: Re: YZ radiator

>Thanks a lot its in great shape. Talk to ya soon Jason

Check out Brendaf@montana.com for you part needs. He goes the extra step. Thanks Brenda 78 and 82 Goldwings for parts,3 CT1 175 Yamahas for parts, 1 125 Yamaha AT1
Sent From: 63.210.72.4 (dialup-63.210.72.4.dial1.atlanta1.level3.net)
Phone: 770-684-4761
David Cummings(goat) www.goat65
Rockmart, GA USA - Saturday, October 20, 2001 at 21:47:40 (CDT)

Brenda Fennessy, thanks for the KDX 400 motor. Good price, fast shipping and kept in contact.
Sent From: 206.37.206.68 (mulder2.chinalake)
Michael Grove rustynuttr> Ridgecrest, Ca USA - Wednesday, October 24, 2001 at 12:25:05 (CDT)

From: Bud Truster truster450
To: brendaf brendaf@montana.com
Date: Thursday, October 25, 2001 5:21 PM
Subject: Re: xl500 piston
Hi Bren got the cylinder & piston today. is very
excellent!!!!--------thanx! I tracked it last nite & it was over 3 days
getting out of montana for some reason-----went from missoula to helena,
then back to missoula again, sounds like it was routed bad wrong. it was
well worth the wait though! thanx again----------Bud

brenda, recieved frame & wheels friday. motor fenders and tank yesterday. THANKS!!! jim.
----- Original Message -----
From: brendanf
To: FivePoint
Sent: Friday, October 05, 2001 9:56 PM
Subject: Re: ct 70

For more info contact me at brendaf@bikeboneyard.com

To return to the main boneyard click here